Blackbird explains a line of professional AV connectivity solutions by Monoprice, including HDMI switches and extenders, as well as GPS cycling computers from Blackbird Tech.
Blackbird is a prominent name in electronics, widely known as the professional audio-video sub-brand of Monoprice Inc. The Blackbird line delivers commercial-grade connectivity solutions, including 4K HDMI switches, matrices, and extenders that are essential for high-fidelity home theater and digital signage setups.
In the realm of sports technology, Blackbird also refers to the manufacturer of GPS cycling computers, such as the BB18 model. These compact devices offer cyclists precise tracking and data logging capabilities. Whether you are configuring an HDMI matrix for a video wall or setting up a GPS computer for your next ride, the manuals below provide the necessary operating instructions and technical specifications.
Nuutste handleidings van manuals+ saamgestel vir hierdie handelsmerk.
Kyk na video's oor opstelling, installasie en probleemoplossing vir hierdie handelsmerk.
Algemene vrae oor handleidings, registrasie en ondersteuning vir hierdie handelsmerk.
On many Monoprice Blackbird switches, you can toggle between Auto and Manual Switching Mode by pressing and holding the 'SOURCE AUTO/3s' button for 3 seconds or by pressing the 'AUTO' button on the IR remote control.
Ensure you are in an outdoor, unobstructed environment. The GPS icon will appear in the upper left corner once satellites are found. If it fails, try restarting the device or performing a factory reset by holding both buttons for 2 seconds while powered off and charging.
Some smaller Blackbird switches, like the 3x1 HDMI Switch (P/N 43963), are powered directly by the HDMI bus and often do not require an external power source. However, check your specific model's manual as larger matrices and extenders always require their dedicated power adapters.
For the BB18 model, while the device is powered off and connected to a charger, press and hold both the left and right buttons simultaneously for 2 seconds to reset it to factory settings.