VTOPEK DVR Inch Smart Screen Player User Manual

DVR Duim Smart Screen Player
Gebruikershandleiding

Produk Inleiding

Thank you very much for buying this Apple CarPlay. For your better use of the carplay, please note the following:

• This carplay is not compatible with Huawei mobile phones, and some Android phones may be disconnected, which is not caused by product failure.
• Check the memory card. The maximum support is 128GB. The quality of the SD card has a great impact on the stability of video recording. To record video safely, use SD cards from major brands such as SanDisk, Kingston, Toshiba, and Samsung. Speed certification must be at least Class 10 .
• Gebruik asseblief ons spesiale motor om te laai (3A), onvoldoende stroom en voltage of the car may also lead to a restart.
• Too many phones connected will cause connection difficulties. Please try to clear part of the Bluetooth connection record. Please read the instructions carefully before use. If you encounter any problems, please contact us in time.
• It is strictly forbidden to use the mobile phone data cable, which will cause damage to the machine.

Bedradingsinstruksies

Interface en knoppie funksies

Kamera installasie

• Locate the drilling hole, find the appropriate installation position in the license plate attachment, mark it with a pen, and then drill the appropriate size of the screw hole.
• Fix the camera to the rear of the car with screws. The reversing trigger wire ( red thin wire) needs to be connected to the positive pole of the reversing light, and finally, use the camera extension cable to connect to the monitor.

Click [Calibration] to enter the Parking Line settings:

• 1. Park the car in the middle of the parking space.
• 2. Manually drag the left, adjust the position of the reversing assist line up, left and right, so that the reverse assist line is horizontal to the parking line on the left of the ground.
• 3. Then drag the right side by hand, adjust the position of the reversing assist line up, down, and down, so that the reverse assist line is horizontal to the parking line on the right side of the ground.
• 4. After adjusting the reversing line, click [ confirm] to save the calibration.

Produkspesifikasie

Interface spesifikasie

1. Home Button: Click to return to the home page
2. Volumeknoppie: Klik om die volume aan te pas
3. Brightness Button: Click to adjust screen brightness
4. Instellingsknoppie: Klik om na die instellingskoppelvlak te spring
5. Tyd en Dag: Wys die huidige tyd en datum
6. BT Music Bluetooth music interface to display lyrics
7. AirPlay: Open the iPhone screen projection and connect the device
8. WIFI Video: Follow the APP, connect to Wi-Fi
9. Car Record: Tap to view 'n video op die videoskerm
10. Carplay: Special connector for iPhone
11. Android Auto: Spesiale aansluiting vir Android-selfoon
12. Miracast: Maak die Android-foon se skermprojeksie oop en koppel die toestel
13. Audio Out: 4 audio modes to choose from(Speaker,Carplay/Auto,FM, AUX）

◆ Carplay

1. Click the [ Apple CarPlay] button to enter Apple CarPlay.
2. Turn on the Wi- Fi and Bluetooth of the mobile phone first, then, as shown in the figure below, select the [ Apple CarPlay] option, click the [ BT Manage] option of the interface, connect Bluetooth with the phone, and you can open the application.
   Wanneer die masjien aangeskakel word, sal dit probeer om outomaties aan die laaste gekoppelde foon te koppel.
3. Turn off your phone’s Wi- Fi to disconnect.
   Note: Apple CarPlay option only supports iPhone phones; Android phones, please select the [ Android Auto] option.

How to connect to the iPhone page?

1. Maak die iPhone oop en gaan na die stelselinstellingsskerm
2. Die Bluetooth-bladsy word vertoon
3. Vind die toestelnaam en klik om die toestel te koppel
4. After the pairing is successful, the interface will pop up, and click “Use Carplay”
5. Die verbinding is voltooi.

Android Auto

1. As shown in the figure, click the [ Android Auto] button to enter Android Auto.
2. Turn on the W i- F i and Bluetooth of the mobile phone first, then, as shown in the figure below, select the [Android Auto] option, click the [ BT Manage] option of the interface, connect Bluetooth with the phone, and you can open the application.
3. Wanneer die masjien aangeskakel word, sal dit probeer om outomaties aan die laaste gekoppelde foon te koppel.

(Skakel jou foon se Wi-Fi af om te ontkoppel)

Airplay/Miracast

Airplay: Open the iPhone and enter the System Settings
Miracast: Maak die Audroid-foon oop, gaan na die Stelselinstellingsskerm

1. Enter the Wifi， connect to your local WiFi
2. After a successful connection, enter the iPhone/phone mirror funtion, and click connect device
3. Voltooi die verbinding

Let wel: After the mirror function is connected, you can see your iPhone/Android phone software, video player software, and some software on the screen may not be supported for use.

BT Musiek
Jy kan Bluetooth-musiek vind deur op die knoppie Apple CarPlay of Android Auto te klik.

1. Turn on the Bluetooth of the mobile phone first, and select the [ Bluetooth Music] option.
2. Klik op die [BT Manage] opsie op die koppelvlak om Bluetooth aan die selfoon te koppel en musiek te begin speel.

The buttons correspond to Last, Play /Pause, and Next, respectively. Click on the Lyrics button [ ] om die lirieke te vertoon.
(Sommige mobiele musiekspeler-toepassings ondersteun nie die vertoon van lirieke nie)
Bluetooth (BT Bestuur)

Soos in die figuur hierbo gewys, klik die Bluetooth-knoppie [ ] om die toestel aan te skakel nadat jy die Bluetooth-koppelvlak binnegegaan het.
Die bladsy sal die toestelnaam vertoon, soos: T86-1 BCC9 D, en klik op die Wysig-knoppie [ ] om die Bluetooth-naam van die toestel te verander.
Select the device name with Bluetooth, and the remote device name of the phone will appear after successfully connecting. At this time, you can use your mobile phone and other functions.

Scan the WeChat code to downloadAPPandchooseotherdownloadingmethods. After downloading and installing, open the software and exit the software after opening it. To connect to the device for the first time,youneedto entertheWIFlsetting, search for Wi-Fi, and enter your password. Reconnection: You do not need to enter the password again. Wait until the device WIF1 in the connected devices shows that it can be switched. Click Switch to connect.
A. Android-fone
A1: Open WIFISettings on your phone and search for WIF1withthenameT86-…….. input
Password”12345678 “to connect; Then open the APP, the recorder
Video interface.
B. Apple mobile phone of the Apple iOS system
B1:Open WIFIs mobile phone, search device WIF, name T86-…… , input password “12345678” to connect; Then open the APP, the recorder
Video interface.
A1: Open Wi-Fi settings on your phone and search for WIF1withthenameT86-…….. input
Password”12345678″ to connect; Then open the APP, the video recorder interface.
B. Mobile phone with the Apple iOS system
B1: Open Wi-Fi settings of the mobile phone, search device Wi-Fi, name T86-……, input the password
“12345678” to connect; Then open the APP, the video recorder interface.
MotorrekordAs shown in the picture above, the main page will not display the camera image; you need to click the car record button to view die kamerabeeld.
When a card is inserted, the system automatically enters the video mode, and when recording, the small red dots in the [ Driving Monitoring] button will flash.
Swipe the screen to the left to switch the front/rear images of the rear-view spieël-dashboard-kamera om terselfdertyd op te neem.

Terugspeelvideo

Soos in die bostaande figuur getoon, klik die [ ]-knoppie om die video-terugspeel-koppelvlak te betree.Jy kan op die bokant klik om die video terug te speel en aan die regterkant om die video te speel.

	Geloopte video geskiet deur die voorste kamera.
	Geloopte video geskiet deur die agterste kamera.
	Klik op die video wat na sluiting gestoor is.
	Klik om view die foto's wat deur die een-aanraakfoto-funksie geneem is.
	Klik die 【Verwyder】-knoppie om te verwyder.

4 Oudiomodusse
Speaker： Audio output from the speaker
Carplay/Auto: Use your phone to connect the original car Bluetooth.
AUX： Audio output from AUX, adjust the volume in the original car
FM: Ons produk kan ook aan 'n FM-sender gekoppel word om draadlose oordrag op dieselfde kanaal as jou FM-radio moontlik te maak.
Ingeboude luidspreker en AUX
This carplay screen for the car has built-in speakers, but for louder sound, you can transmit audio to your car speakers by either FM frequency syncing or connecting the included AUX cable to your car’s AUX input jack.

Stuur FM uit
Soos in die figuur getoon, klik die [FM Transmit] knoppie om die FM Transmit funksie in te voer: dit kan die klank van die toerusting uitstraal, dit met die oorspronklike motorradio ontvang en dit deur die oorspronklike motortoeter speel, en geniet die oorspronklike motor vlak.
When you turn on the FM Transmit option, the monitor will no longer emit any sound .
At this time, you need to turn off the FM Transmit or match the sound to the car’s built-in stereo to have sound.
(As die oorspronklike kragkabel nie gebruik word nie, sal die FM-uitsaaisen versleg, of die funksie kan nie gebruik word nie.)

1. Select the frequency band you want to transmit, e.g., FM88.0MHZ.
2. Verstel die ontvangband van die motorradio na FM88.0MHZ.

Bluetooth
Kies hierdie modus en koppel dan aan 【Apple CarPlay】 of 【Android Auto】 om die skerm te wys. Jy kan die foon se Bluetooth gebruik om direk aan die oorspronklike motor se Bluetooth te koppel. Nadat die verbinding suksesvol is, sal alle klanke van die toestel via Bluetooth na die oorspronklike motorluidsprekers oorgedra word.
Instelling
Soos in die figuur getoon, klik die 【 】-knoppie in die onderste linkerhoek om die instellingskoppelvlak te betree.