TickTime TK3 Timer Instruction Manual

TickTime TK3 Timer Instruction Manual

Produkbeskrywing

Front display screen

Basis (opsioneel)

Terug

1. Digital side
2. On/off button (back)
3. Clock button (back)
4. Alarm button (back)
5. Volume button (back)
6. Magnetic charging port for Xiao Tian Cai watches
7. TIPE-C-laaipoort
8. Dekoratiewe knoppie
9. Klokknoppie
10. Aan/af-knoppie
11. Enkodeerder
12. Volume knoppie
13. Alarm button.

Instruksies

1. Skakel aan

Druk kort op die aan/af-knoppie aan te skakel.

II. Power Off

Druk lank op die aan/af-knoppie , to power off.

III. Set the Clock

When powered on, the display screen shows 00:00 Wed 1-1.
(Default: Wednesday, January 1, 2025)
Druk lank op die klokknoppie to make the year 2025 flash; rotate the encoder to adjust the year.
Short press the encoder to make the month flash; rotate the encoder to adjust the month.
Short press the encoder to make the date flash; rotate the encoder to adjust the date.
Short press the encoder to make the hour flash; rotate the encoder to adjust the hour.
Short press the encoder to make the minute flash; rotate the encoder to adjust the minute.
Short press the encoder to complete the setting.

IV. Set the Alarm (Up to 3 alarms can be set)

1. Notas:
   a. In clock mode, short press the alarm button to view the 3 alarm groups. Long press the alarm button to activate the current alarm group.
   b. Displays – Alarm is on, displays 1 Alarm is off. In alarm mode, rotate the encoder clockwise to turn on the alarm, and rotate it counter clock wise to turn off the alarm.

   

   

2. Werksmetode:
   When the display screen shows the current clock status, long press the alarm button to display the alarm 1 icon . The hour will start flashing; rotate the encoder to adjust the hour. Short press the encoder, and the minute will start flashing; rotate the encoder to adjust the minute. Short press the encoder to complete the setting.
   Short press the alarm button to display alarm 2. Then, long press the alarm button as described above to set alarm 2 and alarm 3.

V. Countdown Instruction

1. Fast Countdown:
   Flip any digital side to face upwards to quickly start a countdown. Available countdown times: 5 minutes, 10 minutes, 30 minutes, and 60 minutes.
   Starts 5-minute countdown
   
2. Custom Countdown
   When the digital side 30 is facing upwards, a 30-minute countdown starts. Short press the encoder, then rotate the encoder to adjust the minute. The maximum setting is 99:00. Once the setting is complete, short press the encoder to start the countdown (if no action is taken, the countdown will start automati-cally after 5 seconds).
   Let wel: During the countdown, short press the encoder to pause; long press the encoder to reset to zero.
3. TickTime Productivity Technique Setup
   Place the digital side 5 up to start the 5-minute countdown. Long press the encoder to enter the TickTime productivity technique mode, and the 25-minute countdown will start.
   TickTime productivity technique mode
   
   TickTime productivity technique introduction:
   One TickTime productivity technique lasts for 30 minutes, consisting of 25 minutes of work( icon is red) and 5 minutes of rest ( icon is blue). This cycle repeats 4 times, totaling 4 TickTime productivity techniques.
   1st TickTime productivity technique
   
   2nd TickTime productivity technique
   
   3rd TickTime productivity technique
   
   4th TickTime productivity technique
   
4. Optel
   In clock mode, short press the encoder to start counting up.
5. Pouse
   During the timing process(countup/count-down), flip the display screen face-up to pause the timing. (Note: If no action is taken within 5 minutes after pausing, the device will automatically switch to clock mode.) Flip it to any digital side face-up to resume the timing. After the timing ends, if no action is taken, the device will switch to clock mode.
   Flip the display screen to face upwards
   
6. Switching from Timing Mode to Clock Mode
   a. In timing mode (countup/countdown), flip the display screen to face down, then flip it back upwards or with the digital side facing up to switch to clock mode. (Note: When the display screen is face down, the device can switch to clock mode within 30 seconds; if held face down for more than 30 seconds, the device will turn off.)
   Flip the display screen to face down
   Flip the digital side to face up
   
   b. In timing mode (countup/countdown), short press the encoder to pause; short press any of the other four buttons on the back of the device to switch to clock mode.
7. Volume aanpassing
   Short press the volume button to cycle through the following settings in order: Mutex, Vibrasie, Volume Level 1, Volume Level 2, Volume Level 3,
8. Laai
   a. The base has a magnetic charging port to charge the timer
   b. The timer has a TYPE-C charging port, and it supports charging with a charger with PD function. (Let wel: During charging, the battery icon will cycle from 1 bar to 3 bars, and once fully charged, the battery icon will show 3 bars.)
9. Biep
   a. When the alarm rings; the buzzer will beep continuously for 60 seconds. Short press any button to stop.
   b. When the countdown ends, the buzzer will beep at different speeds: slow beeping for 1-10 seconds, medium beeping for 11-30 seconds, and fast beeping for 31-60 seconds. During the beeping, flip the device or short press any button to stop.

Produk Parameters

Model: TK3
Produk netto gewig: Ongeveer 183g
Base net weight: Ongeveer 56g
Skulp: PC + ABS material
Beheer metode: Button + gyroscope sensor
Battery kapasiteit: 1400 mAh
Laaistroom: 5V/1A (maksimum)
Standby time (device powered off): 6 maande
Laai tyd: 2~3 H

Produk Parameters

Kragtoevoer: USB-C kragbron
Produk grootte: 64*64*59mm(excluding packaging)
Basis grootte: 94*72*24 mm(excluding packaging)
Uitvoerende standaard: Q/LJNJS 001-2025
Produk lys: Product*1, power cord*1, user manual*1, charging base (optional)
Plek van oorsprong: Guangdong, China

Maatskappy adres: Room 203, Building B, Minle
Science and Technology Park, Minzhi Street, Longhua District, Shenzhen

Webwebwerf: www.ticktime.com

Waarborgkaart

For your rights and interests, please fill in the details and keep it properly. This copy is used as a proof before maintenance:

Gebruikersnaam:
Gebruikersadres:
Poskode:
Kontaknommer:
E-pos:
Aankoopdatum/bestellingnommer:
Return reason:

Product after-sales warranty service: 365 days. (Let wel: gift accessories are not covered by the warranty)