

Think Node M6 Meshtastic Device

Gebruikershandleiding
Produkveiligheidsinligting
Brandwaarskuwing: Observe safety instructions and compliant operation, otherwise it may cause fire, electric shock or other injuries.
Waarskuwing vir verstikking: The product or gadgets inside the package present a risk of causing or contributing to asphyxiation.
The product has some waterproof function and is suitable for outdoor use. However, the product does not support underwater use, in order to prevent electric shock exposure:
- Do not immerse the solar panel underwater;
- Do not spill food or drink on the solar panel;
- Do not put oil or corrosive liquid in contact with the solar panel;
- Do not place the solar panel in an extremely humid environment,
- Do not use external heating equipment to dry the solar panel;
- Do not use a high-pressure water gun to rinse the solar panel:
- Do not use or touch the solar panel in lightning or thunderstorms;
- If your solar panel is damaged or cracked, stop using it immediately.
- Please use the accessories supplied with the product or those designed specifically for this product. The use of other third-party accessories may affect the performance of the device.
- If you want to use third-party accessories, please be sure to read all product warnings before using them.
For information on compatibility of your device, please consult our information channels or contact our specialized technicians.
Voorbereiding vir installasie
Please refer to the following recommendations before installation, so that the solar panels can work more efficiently.
a: Choose a suitable orientation for installation.
If you are in the Northern Hemisphere, install the solar panels facing south,

If you are in the Southern Hemisphere, install the solar panel facing north.

b: Do not install the solar panels in an environment where there are objects covering the solar panels, so as not to affect the conversion of the solar panels.

Installasie van sonpanele
a: Bracket fixing
Select the appropriate tool to securely fasten the bracket to the wall at the desired installation location.

b: Mating solar panels to racking.

Funksiebeskrywing

Knoppie beskrywing
| Naam | Operasie metode | Funksie |
| Funksie knoppie | Dubbelklik | Update node/device location information |
| Triple-klik | Turn GPS on/off | |
| Press and hold for 5 seconds. | Skakel die toestel aan/af | |
| Herstel-knoppie | Enkel-kliek | Reset the device; a restart is required |
Aanwyser Lig Beskrywing
| Naam | Status | Beskrywing | Blink Frequency |
| PWR (rooi) | Krag aan | The red light stays on for 10 seconds. | |
| Krag af | It blinks 5 times. | Fast blink(1 Hz). | |
| Laai aanwyser | When the device is charging via USB or solar power (when exposed to light), the indicator light stays on. | ||
| Lae battery waarskuwing | A low battery warning is triggered when the power is s 3.3V. | Slow blink (0.5 Hz). | |
| DATA (Blue) | Sending /Receiving Data | When the device is sending or receiving LoRa data, it blinks twice. | Fast blink (1 Hz). |
Produkspesifikasies
Module: nRFLR1262
Bluetooth: Bluetooth Low Energy/Bluetooth 5.4
LoRa: US 915MHz/EU 868MHz (External Antenna)
Batterytipe: 18650 Li-ion-battery
Batterykapasiteit: 7000mAh
Dimensions: 210 x 156 x 42mm (excluding antenna & bracket)
Netto gewig: 533.1g
Beskermingsgradering: IP65
Bedryfstemperatuur: -20°C tot +60°C
Bergingstemperatuur: -30°C tot +70°C
Main Board Input: 5V
1A
Solar Panel Output: Rated power 6W output
Paklys
Solar Panel (M6) x 1
Hakie x 1
Screw Pack 1
USB-A to USB-C × 1
LoRa-antenne x 1
GPS-antenna x 1
Gebruikershandleiding x 1
Gereelde Vrae
1: Why do solar panels charge slower and slower after a period of normal use?
2: Are solar panel products waterproof?
3: What is the purpose of these two sensor interfaces?
Let wel: After using the sensor interface and USB interface, please remember to cover the waterproof cap to prevent water from entering the device and affecting its use.
Kliënte ondersteuning
As u enige vrae het, staan kliëntediens altyd by.
info@elecrow.com
techsupport@elecrow.com
Vir meer tegniese besonderhede, besoek asseblief die relevante webbladsy.
FCC WAARSKUWING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation,
Enige veranderinge of wysigings wat nie uitdruklik goedgekeur is deur die party wat verantwoordelik is vir voldoening nie, kan die gebruiker se magtiging om die toerusting te gebruik, vernietig.
LET WEL: Hierdie toerusting is getoets en gevind dat dit voldoen aan die limiete vir 'n Klas B digitale toestel, ingevolge Deel 15 van die FCC Reëls.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Heroriënteer of verskuif die ontvangsantenna.
- Verhoog die skeiding tussen die toerusting en ontvanger.
- Koppel die toerusting aan 'n uitlaat op 'n stroombaan anders as dié waaraan die ontvanger gekoppel is.
- Raadpleeg die handelaar of 'n ervare radio-/TV-tegnikus vir hulp.
- To maintain compliance with FCC’s RF Exposure guidelines. This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
![]()
![]()
Manufacturer: Elecrow
Gemaak in China
Dokumente / Hulpbronne
![]() | M6 Meshtastic Device |
Verwysings
- Gebruikershandleidingmanual.tools
