Solutions MS-TP Programmable Touch Panel
Kopieregkennisgewing
Alle inhoud van hierdie handleiding, wie se kopiereg aan ons korporasie behoort, kan nie sonder die toestemming van die maatskappy gekloon, gekopieer of vertaal word nie.
Produkspesifikasies en inligting waarna in hierdie dokument verwys is, is slegs vir verwysing. Ons kan enige inhoud enige tyd en sonder vooraf kennisgewing verander, uitvee of bywerk.
FCC Kennisgewing
Hierdie produk voldoen aan Deel 15 van die FCC-reëls. Die operasie is onderhewig aan die volgende twee voorwaardes:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.delete, or update any content at any time and without prior notice.
Hierdie produk is getoets en gevind dat dit voldoen aan die limiete vir 'n Klas A digitale toestel, ingevolge Deel 15 van die FCC Reëls. Hierdie perke is ontwerp om redelike beskerming teen skadelike inmenging in 'n residensiële installasie te bied. Hierdie toerusting genereer gebruike en kan radiofrekwensie-energie uitstraal en, indien dit nie geïnstalleer en gebruik word in ooreenstemming met die instruksies nie, kan dit skadelike steurings vir radiokommunikasie veroorsaak. Daar is egter geen waarborg dat inmenging nie in 'n spesifieke installasie sal voorkom nie. Indien hierdie toerusting wel skadelike steurings vir radio- of televisie-ontvangs veroorsaak, wat bepaal kan word deur die toerusting af en aan te skakel, word die gebruiker aangemoedig om die steuring deur een of meer van die volgende maatreëls te probeer regstel:
- Heroriënteer of verskuif die ontvangsantenna.
- Verhoog die skeiding tussen die toerusting en ontvanger.
- Koppel die toerusting aan 'n uitlaat op 'n stroombaan anders as dié waaraan die ontvanger gekoppel is.
- Raadpleeg die handelaar of 'n ervare radio-/televisietegnikus vir hulp.
Klas A ITE
Klas A IOO is 'n kategorie van alle ander IOO wat aan die klas A IOO limiete voldoen, maar nie die klas B IOO limiete nie. Sodanige toerusting moet nie in die verkoop daarvan beperk word nie, maar die volgende waarskuwing moet in die gebruiksinstruksies ingesluit word:
Waarskuwing
Die gebruik van hierdie toerusting in 'n residensiële omgewing kan radiointerferensie veroorsaak.
EC Compliance Statement
(Klas A)
Hierdie produk word hiermee bevestig om te voldoen aan die vereistes uiteengesit in die Raadsriglyne oor die Benadering van die wette van die lidlande met betrekking tot die Elektromagnetiese Verenigbaarheidsrichtlijn 2014/30/EU.
Spanningsbeskerming
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of
your equipment..
Versigtig
The network cable connection method required for this product is direct connection. Please do not cross-connect.
Inleiding
The MS-TP programmable touch panel, designed for automated office systems, multimedia rooms, and smart homes, features a configurable interactive user interface and intelligent networking capabilities. This wall-mounted panel, compatible with standard 86-box installations, includes a 720×720 capacitive touchscreen and one RS-232 serial port. It supports diverse applications across industries, including multimedia conference rooms, multi-functional halls, training centers, showrooms, broadcasting studios, and industrial automation.
Sleutel kenmerke
- ARM Cortex-A55 architecture 1.8Ghz
- Android 11.0 system, 4GB DDR4 RAM, 32GB EMMC Flash
- 4 inch 720*720 (1:1) resolution, capacitive touch screen, standard 86 box wall-in design
- Dual-mode operation – functions as either a touchscreen central control or a user terminal.
- Customizable interface and function configuration through PC software
- Voldoen aan industriestandaard netwerkkommunikasieprotokolle (TCP/IP, Http, UDP, Websok)
- Standard 1Gbps network port
- Dual power supply mode, supporting POE or an independent DC power supply
Pakketinhoud
- A1x Programmable Touch Panel (Wall-in)
- 1x 3pin-3.81mm Phoenix Connectors (male)
- 1x 24V/1A Multinational Power Supply (2pin-3.81mm Phoenix Connector)
- 1x Muurmonteerbeugel
- 2x Bracket Fixing Screw
- 1x Gebruikershandleiding
Spesifikasies
| Tegnies | |
| SVE: | ARM Cortex-A55 1.8GHz |
| Bedryfstelsel: | Android 11 |
| RAM: | 4 GB DDR4 RAM |
| Blits geheue: | 32 GB EMMC-flits |
| Resolusie: | 720*720 |
| Raak tipe: | Kapasitiewe Touch Screen |
| ESD beskerming: | IEC 61000-4-2: ±8kV (luggaping-ontlading) & ±4kV (kontakontlading) |
| Verbinding | |
| RS232: | 1x 3-pen Phoenix Connectors |
| LAN/POE: | 1x Standaard 10M/100M/1000M Ethernet RJ45-poort, ondersteun POE-funksie |
| KRAG: | 1x 2-pin Phoenix Connectors, for power supply or POE |
| DEBUG: | 1x Micro USB, system debugging port |
| Meganies | |
| Behuising: | Front Pane: Touch Screen; Frame: A uminum A oy Rear Case: P astic |
| Kleur: | Front Pane: Back; Frame: Gray Rear Case: White |
| Afmetings: | 86 mm (L) x 86 mm (W) x 44 mm (D) |
| Gewig: | 192g |
| Kragtoevoer: | 24V DC/1A of POE |
| Kragverbruik: | 5W |
| Bedryfstemperatuur: | 0°C ~ 40°C / 32°F ~ 104°F |
| Bergingstemperatuur: | -4 ° F ~ 140 ° F / -20 ° C ~ 60 ° C |
| Bedryfs humiditeit: | 20% ~ 80% (relatiewe humiditeit, nie-kondenserend) |
| Berging humiditeit: | 10% ~ 90% (relatiewe humiditeit, nie-kondenserend) |
Bedryfskontroles en -funksies
| Nommer | Naam | Funksiebeskrywing |
| 1 | Raak skerm | Capacitive touch screen. The user contro interface can be configured through the configuration too . |
|
2 |
RESET-knoppie |
Reboot: After the device boots up, press and ho d the RESET button for more than 1s
less than 5s, then release it, the device wi reboot. The device won’t upload the user projects after rebooting. Reset: After the device boots up, press and ho d the RESET button for more than 5 seconds, then release it, the device writes the user configuration information. The IP wi be restored to the default settings (IP address: 192.168.0.101, subnet mask: 255.255.0.0), the ogin password of the management page wi be initialized to “admin”, the device time wi be initialized to automatic acquisition mode, but user projects won’t be deleted by factory initialization. |
| 3 | POWER-knoppie | Word gebruik vir skerm af of wakker word. |
| 4 | USB-poort | Mikro USB-poort. Die gereserveerde poort vir stelselontfouting. |
|
5 |
LAN/PoE-poort |
Standard 10M/100M/1000M Ethernet RJ45 port with default auto-negotiated speed for device connection, projects uploading & down oading, network communication and debugging. By default, the DHCP function of the contro pane is disabled, and the IP setting is as follows: IP address: 192.168.0.101, subnet mask: 255.255.0.0 |
| 6 | POWER-poort | The power input port (2-PIN phoenix connectors), used for connecting with externa 24V DC power supply. |
|
7 |
RS232-poort |
Programmable RS232 seria port, which is a 3-pin phoenix connector (ma e), compliant with RS232 communication protocol. The pin-outs of the RS232 port are PIN1 for TX, PIN2 for GND, and PIN3 for RX. |
Monteer instruksies
This wall-in touch panel can be mounted on a standard 86 wall box, the mounting steps are as follows:
Stap 1: Install the included wall mounting bracket onto the 86 wall box and fasten it with 2 screws.
Stap 2: Align the back of the touch panel with the slots of the wall bracket and push it in. Press the aluminum edge of the touch panel to ensure that the buckles are in place, and the installation is complete.
To remove the mounted touch panel, insert a screwdriver into the two holes indicated by the arrows and pry the machine out of the bottom box.
Gereelde vrae
Q: Can I use this touch panel without surge protection?
Q: What type of network connection is required for this product?
Dokumente / Hulpbronne
 | MS-TP Programmable Touch Panel |
Verwysings
- Gebruikershandleidingmanual.tools