Omada L3 Campus Stackable Managed Switch User Manual

L3 Campus Stackable Managed Switch

Spesifikasies

• Model: Omada Campus Stackable L3 Managed Switch
• Front Panel: Mode Selection Button, Management Port, LED,
  Console Port USB2.0 Port (Type-C/RJ45), 1G RJ45 Port, 10G SFP+ Slot
  LED
• LED aanduiding:
  • PWR1*: Green On (switch powered by PWR1), Off (PWR2
    disconnected or not working properly)
  • PWR2: Green On (switch powered by PWR1 and PWR2 connected),
    Yellow On** (PWR2 powered), Off (PWR1 disconnected or not working
    behoorlik)
  • LED SYS FAN: Green On (all fans work properly), Yellow On (not
    all fans work properly)
  • MGMT: On (device linked to port), Flashing (transmitting or
    receiving data), Off (no device linked to port)
  • MST: On (device linked to port), Flashing (transmitting or
    receiving data), Off (no device linked to port)

Produkgebruiksinstruksies

Hoofstuk 2: Installasie

Voordat u die installasieproses begin, maak seker dat u alles het
the necessary tools and follow safety precautions.

• Pakketinhoud: Check all items mentioned in
  die pakkie.
• Veiligheidsmaatreëls: Follow the guidelines to
  verseker veilige installasie.
• Installasie gereedskap: Gather all tools required
  vir installasie.
• Produk installasie: Volg die stap-vir-stap
  instructions provided in the manual for successful
  installasie.

Hoofstuk 3: Verbinding

After installation, connect the switch to the network using
appropriate cables and ports as per your network setup.

Hoofstuk 4: Konfigurasie

Configure the switch based on your requirements. You can choose
between Standalone Mode or Controller Mode as per your network
behoeftes.

Gereelde vrae

Q: What should I do if the LED indications show an error?

A: If the LED indications suggest improper functioning, check
the power sources and connections. Refer to the troubleshooting
afdeling in die handleiding vir verdere hulp.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…