
M5STACK Stamp-S3Bat Embedded Core Module

Beskrywing
Stamp-S3Bat is an embedded core module integrated with power management. It utilizes the ESP32-S3-PICO-1-N8R8 as the main control core, supports 2.4GHz Wi-Fi, and comes with built-in 8MB Flash and 8MB PSRAM.
It provides 11 GPIO pins, an onboard battery power interface, and can be directly connected to an external 3.7V lithium battery for power supply.
With an efficient built-in PMIC and multi-level power control design, it supports power input and output control, as well as status monitoring for input voltage en battery voltage. It supports external low-power wake-up. After the main controller shuts down and enters low-power sleep mode, it can be triggered to wake up via an external PMIC wake-up IO. The module features an onboard user button and a programmable RGB LED. With 2.54mm standard-pitch half-hole solder pads, it can be integrated into your applications through SMT, DIP, or other methods, helping developers quickly build IoT applications.

Spesifikasies

Vinnige Begin
Voorbereiding
- Besoek die amptelike Arduino webwebwerf en installeer die Arduino IDE
https://www.arduino.cc/en/Main/Software - Voeg die volgende Raadbestuurder by URL aan File → Voorkeure → Bestuurder van Bykomende Borde URLs:
https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json

- Maak die Boards Manager oop, soek vir "ESP32" en klik op installeer.

- After installation, select the board “ESP32S3 Dev Module”.
- Configure the following options. USB CDC On Boot: “Enabled”, PSRAM: “OPI PSRAM”, USB Mode: “Hardware CDC and JTAG"

Wi-Fi-skandering
- Kies die exampdie program "Examples” → “WiFi” → “WiFiScan”, kies die poort wat ooreenstem met jou toestel en klik die knoppie "kompileer en oplaai" in die linker boonste hoek.
- Nadat die oplaai voltooi is, maak die Seriële Monitor oop om view Wi-Fi-skanderinginligting.


BLE Scan
- Kies die exampdie program "Examples” → “BLE” → ”Scan”, kies die poort wat ooreenstem met jou toestel en klik die knoppie “kompileer en oplaai” in die linker boonste hoek.
- Nadat die oplaai voltooi is, maak die Seriële Monitor oop om view BLE-skanderinginligting.



FCC waarskuwing
FCC waarskuwing:
Enige veranderinge of wysigings wat nie uitdruklik goedgekeur is deur die party wat verantwoordelik is vir voldoening nie, kan die gebruiker se magtiging om die toerusting te gebruik, vernietig.
Hierdie toestel voldoen aan deel 15 van die FCC-reëls. Werking is onderhewig aan die volgende twee voorwaardes:
- Hierdie toestel mag nie skadelike steuring veroorsaak nie, en hierdie toestel moet enige steuring wat ontvang word, aanvaar, insluitend steuring wat ongewenste werking kan veroorsaak.
BELANGRIKE NOTA:
Let wel: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use,s and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Heroriënteer of verskuif die ontvangsantenna.
- Verhoog die skeiding tussen die toerusting en ontvanger.
- Koppel die toerusting aan 'n uitlaat op 'n stroombaan anders as dié waaraan die ontvanger gekoppel is.
- Raadpleeg die handelaar of 'n ervare radio-/TV-tegnikus vir hulp.
FCC stralingsblootstellingsverklaring:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated wita h minimum distance of 20cm between the radiator & your body.
Gereelde Vrae
Q: Can I power the Stamp-S3Bat using a different voltage battery?
Q: How many GPIO pins does Stamp-S3Bat provide?
Q: What is the operating temperature range of Stamp-S3Bat?
Dokumente / Hulpbronne
![]() | Stamp-S3Bat Embedded Core Module |
Verwysings
- Gebruikershandleidingmanual.tools

