LTECH M9 LED Controller Instruction Manual

LTECH M9 LED Controller

The MINI Series LED Remote Controller adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (when unobstructed). When used with the P Series Controllers (P1/P2/P3/P4/P5), one controller supports 5-channel output and is compatible with five types of lamps: DIM (dimming), CT (color temperature), RGB (three-primary color), RGBW (RGB + white), and RGBCW (RGB + cool white + warm white). Within the effective control range, one remote controller can control an unlimited number of controllers, enabling functions such as light on/off, brightness adjustment, color temperature adjustment, RGB static color adjustment, and dynamic mode effects.

It has 9 built-in dynamic modes that can be programmed and modified via the remote controller, meeting users’ needs for different lighting applications. Additionally, it supports enabling/disabling the power-off memory mode and allows setting a 1-9 second fade-in/fade-out time for the controller’s on/off operation.

Tegniese parameters

Afmetings

Produk Installasie

Twee maniere om die afstandbeheerhouer reg te maak:

1. Bevestig die afstandbeheerhouer in die muur met twee skroewe.
2. Bevestig die afstandbeheerhouer in die muur met 'n 3M-kleefmiddel.

Let wel: Trek asseblief die batteryoortjie uit voor die eerste gebruik

Knoppie Funksies

• Aan/Af: Press briefly to turn the light on or off.
• Rooi/Groen/Blou: Press briefly to turn the static red/green/blue channel on or off; Press and hold to adjust the brightness of the current channel.
• W/CCT: Press briefly to turn the W/CCT channel on or off; Press and hold to adjust the brightness of the W channel or the color temperature of the CCT channel.
• CCT Brightness: Press and hold to adjust the brightness of the CCT channel.
• Color Save Button: Press briefly to recall the saved static color;  Press and hold to save the current static color.
• Program Play Button: Press briefly to switch between 3 dynamic effects (jump, fade, stroboscope) (applied to transitions between saved static colors); Press and hold to play 9 dynamic modes in a loop.
• Mode Save Button: Press briefly to recall the dynamic mode; Press and hold to save the current dynamic effect as a dynamic mode.
• Spoed/helderheid +/-: Press briefly to adjust the speed of the dynamic mode; Press and hold to adjust the brightness of the dynamic mode.
• Power-Off Memory Mode Switch: Press briefly to enable/disable the memory mode of the current controller.
• On/Off Fade Time: Press and hold the “FADE TIME” button and the Mode Save Button (while pressing the number keys 1-9) to set the on/off fade time of the controller (1-9 seconds).

Usage of the Programming Button

1. Color Selection: Use the number keys 1-7 to store 7 colors. After selecting a color by pressing the RGB button press and hold the Color Save Buttons in sequence to save the current static color. (The color will be automatically saved to the corresponding button.)
2. Press the Programming Play Button to set 3 dynamic effects for the 1-7 static colors.(Single press to switch: Jump, Fade, Strobe)
   Example 1:Red, Green, Blue, Yellow, Purple, Cyan, White Seven colors, Jump/Fade/Strobe
   Example 2:Red, Blue Two colors, Jump/Fade/Strobe
   Example 3:
   Red, White, Green, White 4, Blue Five colors, Jump/Fade/Strobe
   Note: R + B = Purple, R + G = Yellow, G + B = Cyan, R + G + B = White, R/G/B turned off together = Black
3. Press the Speed/Brightness +/- buttons briefly to control the mode brightness. There are 8 brightness levels in total, with the default level set to 5.
4. Press and hold the Mode Save Buttonto save the current static color + dynamic effect to one of the Mode Save Buttons (1-9).

Change Mode Selection List

NEE.	Color(Switch Colors via  )	Switch Between 3 Types via   Button Press
		Spring	Vervaag	Strobe
1	Swart
2	Rooi	Statiese rooi	Red Fade In and Out	Rooi Strobe
3	Groen	Statiese groen	Green Fade In and Out	Groen Strobe
4	Blou	Statiese blou	Blou Vervaag In en Uit	Blou Strobe
5	Geel	Statiese geel	Yellow Fade In and Out	Geel Strobe
6	Pers	Statiese pers	Purple Fade In and Out	Pers Strobe
7	Siaan	Statiese siaan	Cyan Fade In and Out	Siaan Strobe
8	Wit	Statiese Wit	White Fade In and Out	Wit Strobe
9	Rooi/Groen/Blou	Rooi-Groen-Blou Spring	Rooi-groen-blou vervaag	Red-Green-Blue Strobe
10	Red/Green/Blue/Yellow/ Purple/Cyan/White	Seven-Color Jump	Seven-Color Fade	Seven-Color Strobe

Wiring Diagram for Receiver and Controller

Let wel: One remote control can control an unlimited number of controllers

Herstel knoppie funksie

• Reset Static Color:
  Turn off all channels, then press and hold the Color Save Button corresponding to the static color you want to reset to save. This will clear the current static color.
• Reset Dynamic Modes:
  Press and hold both the Color Save Button “5” and the Programming Play Button simultaneously until the indicator light flashes several times and then turns off. This indicates that all dynamic modes have been reset successfully.
• Synchronize the Remote Control’s Dynamic Modes to the Controller:
  Press and hold both the Color Save Button “1” and “4” until the indicator light flashes several times and then turns off. This indicates that all dynamic modes edited on the remote control have been fully synchronized to the controller.
  Note: If the dynamic modes of the remote control have been reset, you need to synchronize the reset dynamic modes of the remote control to the controller again. This avoids desynchronization between the remote control and the controller’s dynamic modes, which would cause abnormal effect issues.

Pair the Controller

Kodepassing

1. Method 1: Button Code Matching
   Briefly press the Controller ID Learning Button; the load light will flash. Within 10 seconds, press and hold the Remote Control’s On/Off Button until the load light flashes slowly and then stays on. This indicates successful code matching.
2. Method 2: Power-On Code Matching
   Skakel die beheerder af;
   After powering the controller on again, press and hold the On/Off Button on the remote control within 3 seconds until the load light flashes slowly and then stays on. This indicates successful code matching.

Kode skoonmaak

• Button Code Clearing Method:
  Press and hold the Controller ID Learning Button for 10 seconds. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.
• Power-On Code Clearing Method:
  Perform 10 consecutive power-on and power-off operations on the controller. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.

Aanwyser Lig Status

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 30 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Let wel: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Vervoer en berging

1.  Vervoer
   Produkte kan per voertuie, bote en vliegtuie verskeep word.
   Tydens vervoer moet produkte teen reën en son beskerm word. Vermy asseblief ernstige skok en vibrasie tydens die laai- en aflaaiproses.
2. Berging
   Die bergingstoestande moet aan die Klas I-omgewingstandaarde voldoen. Die produkte wat langer as ses maande gestoor is, word aanbeveel om weer nagegaan te word en kan slegs gebruik word nadat hulle gekwalifiseer is.

Aandag
Gebruik asseblief in 'n droë binnenshuise omgewing;

• Wanneer jy die battery installeer, koppel asseblief die positiewe en negatiewe terminaal korrek. As die afstandbeheer vir 'n lang tydperk nie gebruik sal word nie, haal die battery uit;
• Wanneer die afstandafstand verkort word en of die afstandbeheer nie gereeld werk nie, verander asseblief die battery betyds;
• Neem dit asseblief versigtig en sit dit neer om val te voorkom wat skade veroorsaak;
• Indien 'n fout voorkom, moet asseblief nie probeer om produkte self reg te stel nie. As jy enige vrae het, kontak asseblief jou verskaffers.
• Hierdie handleiding is onderhewig aan veranderinge sonder verdere kennisgewing. Produkfunksies hang af van die goedere. Kontak gerus ons amptelike verspreiders as u enige vrae het.

Garantieovereenkomst

Waarborgtydperke vanaf die datum van aflewering: 5 jaar.
Gratis herstel- of vervangingsdienste vir kwaliteitprobleme word binne waarborgtydperke verskaf.

Uitsluitings van waarborg hieronder:
Die volgende voorwaardes is nie binne die waarborgreeks van gratis herstel- of vervangingsdienste nie:

• Verby waarborgperiodes;
• Enige kunsmatige skade veroorsaak deur hoë voltage, overload, or improper operations; Products with severe physical damage;
• Skade veroorsaak deur natuurrampe en force majeure;
• Waarborgetikette en strepieskodes is beskadig.
• No any contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
2.  Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

WAARSKUWING

• INGESLIKKINGSGEVAAR: Hierdie produk bevat 'n knoppiesel- of muntbattery.
• DOOD of ernstige besering kan voorkom as dit ingeneem word.
• 'n Knoopsel- of muntbattery wat ingesluk word, kan binne so min as 2 uur interne chemiese brandwonde veroorsaak.
• HOU nuwe en gebruikte batterye BUITE BEREIK VAN KINDERS
• Soek onmiddellike mediese hulp as daar vermoed word dat 'n battery ingesluk of in enige deel van die liggaam geplaas word.
• Verwyder en herwin onmiddellik of gooi gebruikte batterye weg volgens plaaslike regulasies en hou weg van kinders. MOENIE batterye in huishoudelike asblik weggooi of verbrand nie.
• Selfs gebruikte batterye kan ernstige beserings of dood veroorsaak.
• Bel 'n plaaslike gifbeheersentrum vir inligting oor behandeling.
• Die versoenbare batterytipe: CR2032.
• Die nominale battery voltage: 3Vdc.
• Nie-herlaaibare batterye mag nie herlaai word nie.
• Moenie ontlading, herlaai, demonteer, verhit bo (vervaardiger se gespesifiseerde temperatuurgradering) of verbrand nie. As u dit doen, kan u beserings veroorsaak as gevolg van ventilasie, lekkasie of ontploffing wat chemiese brandwonde tot gevolg het.
• Maak seker dat die batterye korrek geïnstalleer is volgens polariteit (+ en -).
• Moenie ou en nuwe batterye, verskillende handelsmerke of tipes batterye, soos alkaliese, koolstof-sink, of herlaaibare batterye meng nie.
• Verwyder en herwin dadelik batterye of gooi dit weg van toerusting wat nie vir 'n lang tydperk gebruik word volgens plaaslike regulasies nie.
• Beveilig altyd die batterykompartement heeltemal. As die batterykompartement nie stewig toemaak nie, hou op om die produk te gebruik, verwyder die batterye en hou dit weg van kinders.

Gereelde Vrae