KEYPLUS K7 Smart Lock Instruction Manual

KEYPLUS K7 Smart Lock

Deuropening rigting

Shift the left and right handle opening.

According to your need, to adjust the left and right handle opening by a screw driver to release the screw, then turn the handle 180 degrees, and then fix the screw.
Note: Do not unscrew the screw in the handle hole; if it is broken when you do that, you will not have any warranty.

Verstel die rigting van die gat

Volgens jou behoefte om die mortise rigting aan te pas

Wees versigtig voor installasie

Installasie

Check points after installation.n

1. Die slim slot is horisontaal met die deur.
2. The Latch bolt, Deadbolt,lt, and Security Bolt work smoothly and flexibly.
3. Die voorslot is vertikaal en stabiel.

Deadbolt instelling

The deadbolt area is read-only;d, a non-admin user cannot unlock unless it is an admin user or unlocks with a key.

Smart Lock-gebruikerskoppelvlak-werking

Wake up the screen by touching keyboard, press the “*” and “#” keys then input initialize password 123456 and *#” ke to enter initialize menu: (After enter menu, press”* key to return/ press *#” key to confirm) B. First time entering main menu, need to record new password (6 digits with #” key to confirm and repeat) or fingerprint (6 times) as admin user, press “#” key to confirm. Wake up the screen by touching the keyboard, press the “*” and #” keys, then input the admin password and *#” keyor fingerprint to enter the main menu:

Voeg gebruikers by

1. Press 1 to record a new password (6 digits with # key to confirm and repeat again) or fingerprint (6 times) as a normal user, press # key to confirm.
2. Del Users Press 2 to enter the user no. which need to del then press the # key to confirm.
3. Normally open mode. Press 3 to enable and again to disable. 4: Mute mode Press 4 to enable and again to disable.

How does the smart lock connect to theTuyaa app? ( Suitable for models: 610 & 620 Tuya)

1. Maak jou selfoon oop en skandeer die volgende QR-kode om die toepassing af te laai.
2. After registering the user, select” Lock Wi-Fi” in “security & sensor” and connect to Wi-Fi according to the software instructions. (onlysupportst Wi-Fnetworksrk the 2.4G band), operate the smart lock to enter the main menu to active connection mode (when entering the main menu, the blue light will start flashing), then connect the smart lock to the network.

Afstandontsluitfunksie

1. Maak seker dat die WIFI-module aan die wolk gekoppel is, en die APP kan view die toestel.
2. Press “9” + “#” on the door lock to wake up the Tuya module, and the module indicator will light up.
   (Some door locks wake up the module when they are touched; you do not need to press 9#, please operate according to the actual situation.
3. Wag totdat die module aan die wolk gekoppel is. Op die tuisblad van die APP-koppelvlak sal die knoppie "Klik om die deur op afstand oop te maak" verskyn. Nadat u geklik het, sal dit bevestig of u moet ontsluit of nie.
4. Nadat die ontsluiting bevestig is, sal die deurslot ontsluit word, en die APP-kant sal die rekord vir afstandontsluit rapporteer (Let wel: Daar is geen rekordverslaggewing in die inisialiseringstoestand nie, en 'n gebruiker moet ingevoer word voordat die deuropeningsrekord aangemeld kan word).

Afgeleë dinamiese wagwoord

1. Make sure that the wireless module has been detected at the door lock end, and check the detection information when it is powered on.
2. Ensure that the time of the door lock is accurate with the Beijing time. If the door lock time is not set, please manually enter the administrator setting interface to set the correct time (Note: For some devices without a screen that do not have a time to display or broadcast, this step can be ignored)
3. Click “click to get” under the remote dynamic password on the APP side to get the password.
4. Press “9” + “#” on the door lock to wake up the Tuya module, and the module indicator will light up. (Some door locks are in the touch-to-wake mode)
5. Enter the dynamic password. After the verification is successful, the door lock will be unlocked, and the unlock record will be reported.
   Note: The dynamic password will change every 5 minutes, and each password can be unlocked an unlimited number of times.

Tydelike wagwoord

1. Similar to the dynamic password, first ensure that the wireless module has been detected at the door lock end and the time has been calibrated.
2. Create a temporary password on the APP side, enter the password, name, and valid time, and “to be issued” will be displayed after creation.
3. Press “9” + “#” on the door lock to wake up the T12. Temporary password uya module, and the module indicator will light up. (Some door locks wake up the module when they are touched. You do not need to press 9#; please operate according to the actual situation.
4. Wait for the connection to be cestablished After connecting to the Internet, the temporary password of the cloud will be obtained. The status of the temporary password will change from “to be issued” to “in use”, and it can be used.
5. Enter the temporary password. After the verification is successful, the door lock will be unlocked, and the door opening record will be reported. (Note: Unlike the dynamic password, there is no need to wake up the module and then enter the password.)
   Note: The temporary password can be unlockedan unlimited number of times within the valid period.

Tegniese parameters

FCC WAARSKUWING
Hierdie toestel voldoen aan deel 15 van die FCC-reëls. Bediening is onderhewig aan die volgende twee voorwaardes: (1) hierdie toestel mag nie skadelike steuring veroorsaak nie, en (2) hierdie toestel moet enige steuring wat ontvang word aanvaar, insluitend steuring wat ongewenste werking kan veroorsaak.
Enige veranderinge of wysigings wat nie uitdruklik goedgekeur is deur die party wat verantwoordelik is vir voldoening nie, kan die gebruiker se magtiging om die toerusting te gebruik, vernietig.
LET WEL: Hierdie toerusting is getoets en gevind dat dit voldoen aan die limiete vir 'n Klas B digitale toestel, ingevolge Deel 15 van die FCC Reëls. Hierdie perke is ontwerp om redelike beskerming teen skadelike inmenging in 'n residensiële installasie te bied. Hierdie toerusting genereer, gebruik en kan radiofrekwensie-energie uitstraal en, indien dit nie geïnstalleer en gebruik word in ooreenstemming met die instruksies nie, kan dit skadelike steurings vir radiokommunikasie veroorsaak. Daar is egter geen waarborg dat inmenging nie in 'n spesifieke installasie sal voorkom nie.
As hierdie toerusting wel skadelike steuring op radio- of televisie-ontvangs veroorsaak,
wat bepaal kan word deur die toerusting af en aan te skakel, word die gebruiker aangemoedig om die steuring te probeer regstel deur een of meer van die volgende maatreëls:

• Heroriënteer of verskuif die ontvangsantenna.
• Verhoog die skeiding tussen die toerusting en ontvanger.
• Koppel die toerusting aan 'n uitlaat op 'n stroombaan anders as dié waaraan die ontvanger gekoppel is.
• Raadpleeg die handelaar of 'n ervare radio-/TV-tegnikus vir hulp.

To maintain compliance with the CC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body. Use only the supplied antenna.