FUNLAB FF01 Hall-effekbeheerder Instruksiehandleiding

FUNLAB FF01 Hall-effekbeheerder

verbyview

Firefly Pro Controller–Instruction Manual 

Produkspesifikasie

Aan/af werking van die beheerder (onder skakelaarmodus)

Kabelverbinding

Draadlose verbinding

1. Van die TUIS-kieslys, kies Beheerders, dan Verander greep en volgorde.
2. Press and hold Y + HOME for 3 seconds, and 4 LED lights flash quickly.
   The LED(s) are becoming stable, pairing finishes.
3. If no pairing for over 2.5 minutes, it shuts down by itself.
4. If paired and no operation for over 5 mins, shuts down by itself. (No movement on the sensor).

Ontwaak funksie: Press the Home Button, and then the console in the sleep state can be woken up and connected again.

Bedryfsmetode en LED-aanduiding (verbindingsinstruksie)

Saambindmodus

• Combination Pairing: In the off state, press and hold the following key combination to enter the Pairing Mode.
• Android Mode: A+ HOME
  LED2 – LED3 flits vinnig tydens paring, en LED2 – LED3 hou aan terwyl paring suksesvol is;
• Skakelmodus: Y + TUIS
  LED1 – LED4 flash quickly while pairing, and the console automatically assigns when pairing is successful.
• PC Mode: B + HOME
  LED1 & LED4 flash quickly while pairing, and LEDl & LED4 keep on while pairing successfully;
• iOS Mode: B+ HOME
  LED1 & LED4 flits vinnig tydens paring, en LED1 & LED4 hou aan terwyl hulle suksesvol paring (ondersteuningstelsel: iOS 13.6 of hoër/iPadOS 13.6 of hoër);
• Steam Deck Mode: Press the “STEAM” Button on the left side of the console – “Settings” -“Bluetooth” to connect
  B+HUIS
• LED1 en LED4 flits vinnig tydens paring, en LED1 en LED4 hou aan terwyl hulle suksesvol saambind.

Turbo en AUTO TURBO Funksie

In enige modus

• Knoppies kan op die TURBO-funksie gestel word: A/B/X/Y/L/R/ZL/ZR/D-pad-knoppie
• (For the 1st time) Press the TURBO Button+ one of the function buttons to achieve the Manual TURBO Function (Press and hold to launch continuously)
• (For the 2nd time) Press the TURBO Button+ one of the function buttons to achieve the Automatic TURBO Function (Automatically continuous launch)
• (For the 3rd time) Press the TURBO Button+ one of the function buttons to clear the TURBO Function (Clear)
• Let wel: Press and hold the TURBO Button for 5 seconds (if the Vibration intensity is not 0%, there will be a vibration cue ) to clear all TURBO Functions.

TURBO-spoedaanpassing (3 vlakke)

• Aanpassingsmetodes:
• Press TURBO Button+ “Shake L/R Joystick Up”, increase speed by 1 level;
• Press TURBO Button+ “Shake L/R Joystick Down “, reduce speed by 1 level;

Spoedvlakke:

1. Lanceer voortdurend 5 keer per sekonde (Vlak 1);
2. Lanceer voortdurend 12 keer per sekonde (Vlak 2);
3. Lanceer voortdurend 20 keer per sekonde (Vlak 3);

Vibrasie-aanpassingsfunksie

• Press the Motor Vibration Button on the back of the controller, and you can adjust the Motor Vibration Intensity. Vibration Intensity can be cycled in turn. There are 5 intensities, 100%, 75%, 50%, 25% and 0%.

Herstel van die beheerderhardeware

• There is a small hole on the back of the controller, and it is the Reset Button. After pressing it, the controller hardware will reset.

Heraansluiting van die beheerder

• Wanneer die beheerder met die vorige toestel koppel, hoef jy slegs die HOME-knoppie te druk nadat die beheerder in bystand is, en dit sal met die vorige toestel koppel.

Laai aanwysers

• Charging in the OFF State: LED4 flashes slowly, and then turns off while being fully charged;
• Laai terwyl dit aan skakelaar gekoppel is: Die ooreenstemmende kanaallig(e) sal stadig flikker, en dan aanhou terwyl dit ten volle gelaai is.

Lighting Control Instruction (Light Button)

1. Light up the luminous pattern: Press the knoppie.
2. Change the Light Color: Press, knoppie.
   Colors will change each time you press the knoppie.
3. Change the Lighting Mode: Hold the, Initial Mode: Always-on
   1st time-click: breathing light mode
   2nd time-click: quick flash mode
   3rd time-click: vibration lighting mode
   Back to Always-on: turn off and then turn on the light.
4. Turn OFF the light: Hold die knoppie vir 5 sekondes.
   Turn ON the light: Press die knoppie.

Makro en kartering funksie op knoppies van die rug

Makro-funksie-makro-knoppies

• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the buttons you want to edit (up to 24 steps). The controller will have the vibration cue after loosening the MR Button and then pressing the XR Button to trigger the Macro Buttons.
• Press and hold the ML Button and don’t loosen (4 LED lights turn on, entering programming), inputting the buttons you want to edit (up to 24 steps). The controller will have the vibration cue after loosening the ML Button and then pressing the XL Button to trigger the Macro Buttons. Buttons that Macro Function could edit are A/B/X/Y/L/R/ZL/ZR/+/-/D-pad Buttons and L/Rjoysti cks (can be used as a combo in the game).

Kartering funksie-programmeerbare knoppies

• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the single button you want to map. The controller will have the vibration cue after loosening the MR Button and then pressing the XR Button to trigger the Programmable Buttons.
• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the single button you want to map. The controller will have the vibration cue after loosening ML Button, and then pressing XL Button to trigger Programmable Buttons; and Buttons that Map ping Function could edit are A/B/X/Y/L/R/ZL/ZR/+/-/D-pad Buttons L/Rjoysti cks.

Let wel:

1. Met geheue funksie;
2. Press the MR/ML Buttons that set programming, and there is a vibration cue, and then you can clear the Macro and Mapping Function of the XR/XL Buttons.

Sleutelkoppelaar APP Instruksies

1. Maak die appwinkel oop en soek vir “Keylinker” om die APP af te laai.
2. Open the Bluetooth connection handle.
3. APP KEYLINKER BLE appears, click, and connect successfully.
4. Click the settings icon on the right to enter the settings page.
5. Jy kan die knoppie in die APP verander, die ligte stel, die vibrasie aanpas, ens.

Ondersteuning

• Ons belowe om volhoubare dienste vir hierdie beheerder te lewer. U kan meer operasionele leidingondersteuning kry vanaf ons dienskanaal en amptelike diensverskaffers. web:
• Webwebwerf: www.funlabswitch.com
• Instagram: funlab_official
• Diens: support@funlabswitch.com
• Onenigheid: