Fender Quantum HD Software User Manual

Fender Quantum HD Software

Spesifikasies

• Product Name: Quantum HD Series
• Koppelvlaktipe: Oudio-koppelvlak
• Manufacturer: Fender
• Versoenbaarheid: Windows, macOS
• Verbinding: USB-C

verbyview

• This Software User Manual details how to use Universal Control to control Quantum HD audio interface. Before jumping in, make sure you’ve registered your device and installed Universal Control, as it provides updates and upgrades for your Quantum interface.
• For more information about the Quantum HD, including hardware features, hookup diagrams, and getting started with the interface, please review jou Quantum-eienaarshandleiding.

Produk registrasie en installasie proses
Jou Quantum HD is 'n kragtige oudio-koppelvlak, gelaai met professionele klankgereedskap en buigsame moniteringkontroles. Voordat u aan 'n rekenaar koppel, besoek asseblief www.fender.com and navigate to the Quantum HD product page to verify the latest system requirements for your interface. Once you’ve verified that you meet the latest system requirements, follow these steps:

1. Visit My.Fender.com and create or log into your user account.
   • Note: If you have previously created a MyPreSonus account, you can use these credentials on MyFender.com to log in. All of your previous registered PreSonus products will be available from the new unified MyFender account experience.
2. At the top of your MyFender homepage, click onto the “Register Products” button. After clicking, a dialog window will appear.
3. From the dialog window, specify the date you purchased the interface and the serial number on your interface. After you’re done,click “Register.”
4. After clicking Register, another dialog window will appear where you can initiate your Fender Studio Pro downloads.
5. To download Universal Control, navigate to the Quantum HD product page from your MyFender homepage.

Let wel:
The speed of your processor, amount of RAM, and capacity, size, and speed of your hard drives will greatly affect the overall performance of your recording system. A faster processor and more RAM can reduce signal latency (delay) and improve overall performance.When connecting to Universal Control, you have two options:

• Connect and sync your Quantum HD interface to your desktop via USB-C connection. This option allows you to use Universal Control while recording and playing back audio through Fender Studio® Pro or a third-party DAW of your choice.
• Connect your desktop, Apple iOS / Android device, or iPad to the same wireless network. This option will allow you to use any or all of these devices to remote control your Quantum interface anywhere in the studio or venue.

The following sections detail the Universal Control installation process for Windows, Mac, iPad, and Apple iOS / iPadOS /
Android-toestelle.

Let wel:
Make sure your Quantum interface firmware version is up to date from your computer before connecting to the device any other way.

Universele beheer installasie vir Windows

• Koppel jou Quantum-koppelvlak aan 'n beskikbare USB-C-poort en begin die installeerder. Die Universal Control-installeerder sal jou deur elke stap van die installasieproses neem.
• This application will install the ASIO drivers. Please read each message carefully. It is recommended that you quit all applications before you start the installation.

Universele beheer installasie vir macOS

• Koppel jou Quantum-koppelvlak aan 'n beskikbare USB-C-poort en begin die installeerder. Die Universal Control-installeerder sal jou deur elke stap van die installasieproses neem.
• Quantum-reeks toestelle benodig 'n pasgemaakte bestuurder. Hierdie bestuurder is ingesluit by die Universal Control-toepassing.
• Nadat u Universal Control geïnstalleer en begin het, kan macOS-sekuriteit u vra om "Goedkeur die oudiobestuurderstelseluitbreiding."
• For macOS 15/26 Users: Open System Settings → General → Login Items & Extensions → click the “i” icon next to Universal Control.
• Die bedryfstelsel sal jou die keuse gee van "OK" of "Open Stelselinstellings." Kies "Maak stelselinstellings oop", of as jy reeds op "OK" geklik het, maak Stelselinstellings > Privaatheid en sekuriteit oop.
• Nota vir macOS-gebruikers: Wanneer die installasie voltooi is, sal jy die Universal Control-toepassing in jou Applications-lêergids vind. Dit word aanbeveel dat jy dit in jou Dock plaas vir maklike toegang.

Vir macOS 12/13-gebruikers:

• Kies "App Store en geïdentifiseerde ontwikkelaars" as dit nie reeds gestel is nie. Kies "Laat toe" sodat Universal Control die Quantum-bestuurder kan byvoeg. Voer jou stelselwagwoord in soos versoek.

Vir macOS 14-gebruikers:

• Kies "App Store en geïdentifiseerde ontwikkelaars" as dit nie reeds gestel is nie. Klik op "Besonderhede."
• Kies jou metode van verifikasie.
• Aktiveer die universele beheeropsies en klik op OK.
• Jy is nou gereed om jou nuwe Quantum te gebruik!

Universal Control Installation for Apple iOS / iPadOS / Android
To remote control your Quantum interface with Apple iOS / iPadOS / Android devices, you must first locate and install the Universal Control application onto your Apple iOS / iPadOS / Android device from your app store. Once downloaded, you can use Universal Control with an Apple iOS / iPadOS / Android device by connecting to the same wireless network as the computer that is connected via USB to your Quantum interface.

Neem asseblief kennis:
Quantum interface firmware can only be updated from your computer. Firmware updates from Universal Control are not available from Apple iOS / iPadOS / Android mobile devices.

iPadOS Low Latency Driver

• When using the latest iPad Air M3 and iPad Pro M5, round trip lag (latency) can be reduced by up to 40% (2-3ms less latency) by enabling the Quantum USB Audio Driver from your iPad settings. Once Universal Control is installed on your iPad, navigate to iPadOS’s Settings > Apps > Universal Control and turn on the Quantum USB Audio Driver.
• Note: This driver only applies to Apple iPadOS 18+. Not applicable to any earlier iPadOS versions nor any version of Android.

Mobile Compatibility Modes

• Due to limitations to some operating systems, the Quantum HD includes various mobile modes, which allows it to be used on Android devices with Android version 14 or later.

When using Quantum HD with a device that has Android 14+, ensure that the correct mobile mode is selected. To change modes from your Quantum HD, press and hold  the knob until the “Settings” screen appears. Navigate to “Mobile Mode” (shown as “Device Mode” in Universal Control), then press the knob to select a mode.

• Off: Use this mode for macOS, Windows, and iOS / iPadOS devices (no channel or sample rate limitations).
• Android: Use this mode for Android OS 14+ devices. This option is best for most applications and supports 2 (QHD 2) or 8 (QHD 8) input channels.
• Android+: This mode is also used for Android OS 14+ devices (for use with specific applications that can access full channel counts).

Let wel:
Die maksimum sample rate possible for both Android and Android+ modes is 48 kHz.

Universele beheer

• Universal Control is both a driver-management utility and software control interface for your Quantum Interface

Universele beheer verskaf die volgende:

• Hardware Control. All of Quantum’s front panel hardware controls can be adjusted using Universal Control, facilitating easy hardware manipulation even if Quantum is installed in a location out of reach of the computer operator.
• Lae Latency Monitering. Die gebruik van Universal Control elimineer die latensie wat verband hou met DAW I/O buffering wat monitering problematies maak vir die uitvoerder. Deur die DAW se sagteware-invoermoniteringskenmerk heeltemal van die moniteringseinvloei te verwyder, is die behoefte om I/O-buffergroottes en latensie aan te pas nie meer 'n probleem nie.
• Stuur / Cue Busse. Universal Control het stereo aux busse, met onafhanklike stuurvlakke per inset.
• Konfigurasiebestuur (tonele). Universele beheer konfigurasies kan gestoor en gelaai word na / van skyf as tonele, vir gerieflike en onbeperkte sessie bestuur.

Universal Control has two main components: the Start and the Mixer pages. We’ll go into more detail about each in the sections below.

Universal Control Start Page
Universal Control contains driver support, software control, monitor mixing, and firmware management for Fender and PreSonus hardware. After opening Universal Control, you will see the Launch window. From this window, you can manage all the driver settings.

• Sample Tarief. Verander die sampdie koers. Jy kan die s stelampkoers na 44.1, 48, 88.2, 96, 176.4 of 192 kHz. 'n Hoër sample koers sal die getrouheid van die opname verhoog, maar dit sal ook die verhoog file grootte en die hoeveelheid stelselhulpbronne wat nodig is om die klank te verwerk.
• Klok Bron. Stel die digitale klokbron. Vanaf hierdie spyskaart kan jy die klokbron vir jou Quantum HD-koppelvlak stel. Intern, Eksterne S/PDIF, Eksterne ADAT of Wordclock (slegs Quantum HD 8).
• Buffer Size (Windows only). Sets the Buffer Size. From this menu, you can set the Buffer Size for your Quantum HD interface from 16 to 2048 samples. Lowering the buffer size will reduce the overall latency. However, this will also increase performance demands on your computer. In general, you will want to set the buffer size as low as your system can safely support. If you begin to hear pops, clicks or distortion in your audio path, try raising the buffer size.
• Device Mode (HD8 only): Displays the current device mode.
• Input Format. Details your device, input channels, and bitrate.
• Uitset formaat. Besonderhede jou toestel uitset kanale en bitrate.
• Firmware. Wys die huidige firmwareweergawe.
• Reeksnommer. Vertoon jou Quantum-reeksnommer.

Begin die Universal Control Mixer
Universal Control’s Mixer can be launched from the Universal Control application (Start Page).

1. Maak Universele Beheer oop.
2. From the Universal Control Start Page, click on the product card for the Quantum HD Control Panel (mixer).
3. Die Universal Control Mixer sal in 'n ander venster oopmaak.

Verlaat universele beheer

Vir macOS-gebruikers:

• Kies "Verlaat universele beheer" in die macOS-toepassingskieslys wanneer Universele beheer die voorgrondtoepassing is.
• Gebruik die standaard macOS-sleutelbordkortpad: Command + Q.

Vir Windows-gebruikers:

• Klik op die "X" toemaakknoppie in die venstertitelbalk.

Universele beheermenger
Universal Control’s layout and functionality is similar to what is found on analog mixers and shares many elements with Fender Studio Pro’s mixer layout.

Navigasiebalk
The navigation bar has two options to choose from:

• Scenes. Shows / Hides the Scenes panel. See section 2.2.7 Scenes for more information about how to use this feature.
• Instellingspaneel. Wys / versteek die instellingspaneel (vervang die menger). Sien afdeling 2.2.8 Instellingspaneel vir meer inligting oor hoe om hierdie kenmerk te gebruik.
• Power Button. Turns the mixer on or off. Turning the mixer “off” bypasses the mixer in Universal Control, which can be helpful if you would like to mix and create cue mixes directly in the DAW.

Kanaal verbyview

Kanaalinsette

• Elke kanaalinvoerstrook beheer 'n ooreenstemmende Quantum-hardeware-invoer of virtuele invoer. Die uitset van alle kanaalinsette word altyd na die Hoof 1 en 2 uitsette gestuur (behalwe wanneer gedemp). Insette kan opsioneel na ander uitsette gestuur word via Sends en die FlexChannel-kontroles. Universele beheerkanaalinsette is in wese dieselfde vir alle insette; daar is egter 'n paar verskille tussen die analoog en digitale insette soos hieronder aangedui.

Kanaalinvoerkontroles

• High Pass Filter (HPF). Engages/disengages an HPF at 80 Hz with a slope of 12 dB per octave.
• 48V. Skakel 48V fantoomkrag in / ontkoppel vir gebruik met kondensormikrofone.
• Autogain. Stel outomaties die versterking vir die geselekteerde kanaal in.
• Pad. Cycles through -20 dB or no pad attenuation (default). Pad does not affect the Line or Instrument inputs.
• Preamp Verhoog vlak. Gebruik hierdie kontrole om die versterking (0 dB tot +75 dB) vir jou mikrofoon of instrument te stel.
• Line Input Level. If a line-level signal is connected through the TRS port of the combo jack, then preamp verkry beheer skakel oor na 'n lynvlakbeheer (-12 dB tot +12 dB).
• Verkry waarde. Vertoon die absolute waarde vir die huidige wins. Dubbelklik op die waarde om 'n spesifieke waarde in te voer.

Stuur
Controls the send level of the audio being sent to the Return FlexChannel. Depending on your hardware, different amounts of outputs will be available as Sends. Loopback virtual outputs can be shown in Settings as well (see section 2.2.8 Settings Panel).

• Stuur bestemming. Wys die uitsetpaar waarna oudio gestuur word.
• Stuur vlak. Beheer die algehele vlak wat na 'n uitsetpaar gestuur word.
• Note: If Speaker Switching is active, outputs 3 – 4 will be disabled for Sends.

Universele beheermenger

Meng kontroles

• Pan. Stel die panposisie vir die sein in 'n stereomengsel (van toepassing ook op Sends).
• Demp. Demp die sein (geld ook vir Sends).
• Solo. Solos die sein (demp alle ander kanale in die hoofmengsel).
• Mono / Stereo Skakel Wissel. Kombineer 2 aangrensende kanale van dieselfde tipe in 'n stereokanaal.
• Huidige vlakwaarde. Vertoon die absolute waarde vir die huidige vlak. Dubbelklik op die waarde om 'n spesifieke waarde in te voer.
• Kanaalmeter. Vertoon die huidige vlak van jou mikrofoon of instrument pre-fader.
• Channel Fader. Beheer die algehele vlak van die kanaal in die hoofmengsel.
• Kanaalnommer. Dui die kanaalnommer aan.
• Kanaalikoon. Kies uit 'n lys ikone vir die kanaal
• Kanaalnaam. Dubbelklik om 'n pasgemaakte naam vir die kanaal te skep.
• Kanaalkleur. Klik op die spasie om die kanaalkleuropsies te wys.

FlexChannel Return
Invoerkanale word altyd na Hoofuitsette 1 en 2 herlei. Die insette kan egter opsioneel na enige beskikbare hardeware-uitset of Loopback-stroom gestuur word via Sends en die FlexChannel.

• Keer terug Kies. Kies die Terugkeer- of Terugloopstroom om deur die kanaalstrook beheer te word.
• Copy / Paste Mix: Copying the current mix allows you to quickly set up multiple mixes. Right-click on the fader for copy and paste options.
• Fader Flip: When Flip is activated, fader controls switch to represent the per-channel Send levels of the chosen Send destination. Faders will change to green to indicate Flip is active; when activated, the fader controls the send level rather than the channel volume.
• Demp. Demp die geselekteerde terugkeer- of teruglusstroom.
• Fone Luister. Jy kan na enige van die mengsels luister deur op die koptelefoonikoon te klik. Dit sal die geselekteerde mengsel na Headphone 1 stuur (indien meer as een koptelefoon), sodat jy jou cue-mengsels kan aflê.
• Mono / Stereo wissel. Wissel die kanaal tussen 'n stereokanaal of 'n gesommeerde monokanaal.
• Huidige vlakwaarde. Vertoon die absolute waarde vir die huidige vlak. Klik op die waarde om 'n spesifieke waarde in te voer.
• Kanaalmeter. Wys die huidige vlak.
• Channel Fader. Beheer die algehele vlak vir die geselekteerde terugkeer- of teruglusstroom.
• Kanaalikoon. Kies uit 'n lys ikone vir die kanaal
• Kanaalnaam. Dubbelklik om 'n pasgemaakte naam vir die kanaal te skep.
• Kanaalkleur. Klik op die spasie om die kleurkieser te wys.

Monitor kontroles
Die monitorbeheerstrook bevat elemente wat verband hou met die hoofuitsette, oorfone en luidsprekerskakeling.

• Hoof Uit Vlak. Dit is die meestervlakbeheer vir Quantum se hoofuitsette 1 en 2. Dit verrig dieselfde funksie as die Knop op Quantum se voor- of boonste paneel.
• Headphone Level. These is the level controls for Headphone Output 1 and 2. It performs the same function as the Knob on Quantum’s front or top panel when the Knob is switched to Headphone control. The Quantum HD 2 only has one headphone output.
• Dim. Verminder die hoofuitvoer met die hoeveelheid wat in Instellings gestel is (verstek is -10 dB)
• Luidsprekerskakelaar. Wanneer Luidsprekerskakeling aktief is, verander na óf luidsprekerstel A óf luidsprekerstel B. Let daarop dat hierdie opsie nie beskikbaar is nie en by verstek grys is.
• Demp. Demp die hoofuitvoer. Demp beïnvloed nie oorfone nie.
• Fone Luister. Dit sal die hoofmengsel (uitsette 1/2) na Koptelefoon 1 stuur.
• Level Value. Displays the absolute value for the current level. Click on the value to enter a
  spesifieke waarde.
• Monitor meters. Hierdie meters vertoon die seinvlakke van die monitormengselbus net voor die monitorvlakbeheer.
• Channel Fader. Beheer die algehele vlak vir die hoofuitsette. Hierdie volumebeheer is onafhanklik van die hoofkodeerder. As die verduistering afgeskakel word, sal klank nie na die hoofvolumebeheer oorgaan nie.
• Kanaalnommer. Dui die kanaalnommers aan.
• Channel Icon. Choose from a list of icons for the channel. All Icons can be shown/hidden from the Settings panel.
• Kanaalnaam. Dubbelklik om 'n pasgemaakte naam vir die kanaal te skep.
• Kanaalkleur. Klik op die spasie om die kleurkieser te wys. Die hele kanaal kan in Instellings ingekleur word.

Tonele
Universal Control laat jou toe om 'n biblioteek van "tonele" te skep en te stoor. 'n Toneel is soos 'n momentopname van jou mengsel: Dit stoor elke kanaalparameter vir elke analoog-invoer, sowel as elke fader se posisie, die aux-mengsels, kanaaldempings en solo's, ens.

Tonele verskaf metodes vir die bestuur van Universal Control-mengerkonfigurasies as persoonlike voorafinstelling files. When a Universal Control Scene is saved, the current Universal Control configuration is saved to your computer. When a Scene is subsequently reloaded, Universal Control is returned to the same configuration state, regardless of any changes to Universal Control that were made in the interim.

• Tonele-ikoon ( ): Select to open (blue) and close (gray) the Scenes window.
• Save: Saves the current mixer configuration to the selected Scene (overwrite).
• Load: Loads the selected Scene (double-clicking the chosen Scene will also load it).
• Store Scene: Click the plus icon to save the current mixer configuration and give it a name.
• Delete Scene: Deletes the selected Scene.

Instellingspaneel
Globale parameters vir kwantum- en universele beheer word in die instellingspaneel opgestel:

Hardeware-instellings:

• Sends. Changes which outputs are available for Sends (For more information, check out Section 3.1.2).
• Main Encoder. Select which speaker(s) are controlled by the knob.
• Luidsprekerskakeling. Kies die gedrag vir luidsprekerskakeling wanneer die Hoofbeheerknoppie gedruk word.
• Headphone Source Selector (“HP Source”). Selects the source for the Headphone Output 1 or 2. Access to certain headphone sources is dependent on the Quantum model.
• S/PDIF Output Source. Selected which source is sent out of the S/PDIF RCA port.
• Demp knoppiegedrag. Kies of die dempknoppie op die boonste of voorste paneel oudio by die hoofuitsette demp, of die klank verdof.
• Dowwe hoeveelheid. Verstel hoeveel verdowing toegepas word wanneer Dim geaktiveer is (verstek is -10 dB)
• LED Helderheid. Pas die algehele helderheid van alle LED's aan (verstek is 100%)
• Fabrieksterugstelling. Stel alle parameters terug na fabrieksinstellings.

UI-instellings:

• Kleur kanale in. Pas die tans geselekteerde kanaalkleur op die hele kanaalstrook toe.
• Peak Hold. Skakel Peak Hold aan of af.
• Show all Digital (Quantum HD only). Shows or hides all ADAT and S/PDIF inputs in the mixer. Hidden by default.
• Show all Loopback. Shows or hides all Loopback Inputs, Stream Mix Sends, and Flex Mix Stream Mixes in the mixer. Hidden by default.
• Edit Popup: Shows or hides the popup editor.
• Meter verval. Stel die meterverval op óf Stadig, Medium of Vinnig.

Gebruik Universal Control se menger

Terugloop
Loopback audio is the industry term for routing audio from one application to another. Applications that use audio interfaces, like your Quantum interface, are designed to receive audio from one audio device and send audio to one audio device. This means that most applications can only send to and receive from an audio interface, but not from other applications. This can present a challenge in certain situations. Fortunately, Quantum HD audio interfaces allow you to take audio from any of Universal Control’s mixer inputs (mics, guitars, computer audio, etc.) and send the combined audio to another application for the purpose of recording or live streaming.

Hoe om Loopback te gebruik
As jy die Loopback-funksie wil gebruik, volg die aanwysings hieronder:

1. Make sure that your Quantum HD is selected as the Windows or macOS playback device.
2. In your DAW or software application, choose the channel input labeled Loopback 1 or Loopback 2. Any audio sent to Loopback 1 or 2 will be available as a virtual input in your DAW or other software applications (not all software applications support multichannel inputs).
   Note: Loopback inputs are disabled at sample tariewe van 176.4 en 192 kHz.
3. In Universal Control’s mixer window, adjust the send level to whichever Loopback send you’ve selected in Fender Studio Pro.
   • Loopback 1 Stuur Vlak. Pas die hoeveelheid oudio aan wat jy na Loopback-stroom 1 wil stuur.
   • Loopback 2 Stuur Vlak. Pas die hoeveelheid oudio aan wat jy na Loopback-stroom 2 wil stuur.
4. Nadat jy die terugstuurvlak aangepas het, sal jy sien dat meetvlakke verskyn binne die DAW- of sagtewaretoepassingskanaal wat jy opgestel het. Sodra meting verskyn, is jy gereed om oudio op te neem.

WAARSKUWING:
Maak seker dat die kanaal in jou DAW gedemp is voordat jy opneem aktiveer om terugvoerlusse te vermy.

Quantum Multichannel
Multichannel is a hardware and software operating mode that can be configured using Universal Control. Quantum HD 2 and HD 8 interfaces can be used as an all-in-one monitoring hub for some multichannel formats (depending on the amount of analog outs per device).
Wanneer 'n multikanaalmodus gekies word, sal die knop alle ooreenstemmende luidsprekervolume gelyktydig beheer. Vir meer inligting oor elk van die Multichannel-opsies, review die lys hieronder:

• None: Knob control is disabled and unity audio will be sent out of all outputs.
• All: The knob will control the output volume for all outputs at the same time.
• 1 – 2: The default Main Encoder mode. The knob will control the output volume for Main Outputs 1 and 2.
• 1 – 4: The knob will control the output volume for Outputs 1, 2, 3, and 4 all at the same time.
• 1 – 6 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, and 6 all at the same time.
• 1 – 8 (Quantum HD 8 only): The knob will control the output volume for Outputs 1, 2, 3, 4, 5, 6, 7, and 8 all at the same time.
• All + ADAT: The knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.

WAARSKUWING:
Full-scale audio will be sent out of Main Outputs 1 and 2. Main Outputs 1 and 2 will be muted when this mode is selected to avoid damaging speakers or other equipment.

Using Your Quantum Interface

As 'n oudio-koppelvlak

• The Quantum HD functions like other audio interfaces when used without the Universal Control application installed. Quantum HD’s class-compliant (macOS) and WDM drivers (Windows) enable it to be used for computer audio I/O routing with any compliant software with some limitations.

Selfstandige gebruik (HD 8 ADAT Preamp Uitbreiding)
The Quantum HD 8 can be used to add mic pres to another Quantum HD running in audio interface mode (with Universal Control installed) or a third party audio interface that supports ADAT optical inputs as well as S/MUX and its variants. To use a second or third Quantum HD as a standalone preamp through ADAT, access the secondary or tertiary Quantum HD’s Global Settings when not connected to a computer and set the Standalone mode to “ADAT.” By default, this mode is set to “Mixer.”

• As long as the additional HD 8 is put into ADAT mode, and the clock source is set to externally clock via SPDIF, ADAT, or Word Clock, the 48V and Gain Knob controls will be present at the top of each ADAT fader.
• Note: When in ADAT mode, the knob of the HD 8 expansion will no longer control volume and will blink 3 times if turned in either Main or Headphone control modes.
• The knob will still control gain level if a channel is selected.
• If you select “All + ADAT” from the Main Encoder settings, the knob will control the output volume for all outputs (including the ADAT connected HD 8) at the same time.
• Note: As with any of the other Main Encoder link modes, as outputs get assigned to be controlled by the knob, those outputs paths become unavailable as Sends for cue mix routing, etc.

 Send Routing Options
Quantum HD interfaces have two send options located in the Universal Control settings panel. Depending on which option is selected, ADAT Sends and computer playback channels (ex., USB 5/6) will become available or unavailable. In either mode, Loopback 1 and Loopback 2 are available as Sends on any input channel.

• Analog Out (default). When analog out is selected, Sends can only be routed to the physical analog outputs of Quantum (for example, Out 3/4, Out 5/6, etc.). When this option is selected, ADAT signals can be easily routed from your DAW.
• Analog + ADAT. When Analog + ADAT is selected, the mixer is reconfigured so that all analog and ADAT outputs are available as Sends on input channels. When this option is selected, the computer playback input channels (USB 5 – 10) will no longer be available in UC’s mixer and all ADAT signal routing must be done through Universal Control. In other words, ADAT will not pass if routed from a DAW.

LET WEL:
By sample rates greater than 96 kHz, all digital inputs are disabled as well as Loopbacks 1 and 2.

Met universele beheer

• Quantum HD and Universal Control can be used without a DAW or any other software. Using Universal Control without a DAW provides access to all Quantum HD functionality and simplifies the use of Quantum HD’s digital mixing and monitoring when a DAW is not needed.

Quantum I/O-bestuurdername

• Each Quantum input and output has a channel number and name provided by the Quantum HD drivers on macOS and Windows. If an audio software application can access Core Audio / ASIO devices directly, it may be possible to designate specific inputs and/or outputs within the application.

Universele beheerinstellings wat na kragsiklus behou word

• All currently active Main Mix settings (channel volume level, pan position, solo, mute, and stereo link) and monitor settings (main and headphone output levels) are saved to internal firmware before your Quantum HD are powered down, and recalled when power
  is reapplied.

Let wel:
Veranderinge word nie onmiddellik gestoor nie. Laat asseblief tot 10 sekondes toe vir die instellings om op die toestel gestoor te word voordat dit afgeskakel word.

Met 'n DAW (sonder universele beheer)

• Wanneer dit met 'n DAW gebruik word, maar sonder die Universal Control-toepassing, beheer die DAW alle sein-I/O-roetering en sagtewaremonitering.

Monitering met die DAW

• Die primêre funksie van Universal Control is om Quantum se insette tydens lewendige optrede te monitor. Wanneer sagteware-monitering in die DAW geaktiveer is, moet Universal Control-insetmonitering gedeaktiveer word om verdubbelde seine uit te skakel.
• Maak seker dat jy invoermonitering in Universal Control deaktiveer wanneer jy sagtewaremonitering via die DAW doen. Indien Universal Control se invoermonitering nie gedeaktiveer is nie (gedempte kanaal, fader af, of omseilde menger), phasing en/of verdubbeling van die gemonitorde sein(e) sal plaasvind omdat die insetsein twee keer gehoor word – eers vanaf die lae-latensie DSP-mengsel (Universal Control) en kort daarna vanaf die hoër-latensie sagtewaremengsel (DAW).

Hoe om insetmonitering in Universal Control uit te skakel

• Om insetmonitering in Universele Beheer te deaktiveer wanneer sagtewaremonitering in die DAW gebruik word, maak Universele Beheer oop en demp alle invoerkanale binne Universele Beheer of aktiveer "Bypass Mixer" in die Instellings. Universele beheer kan dan gesluit word.
• Die gebruik van 'n DAW sonder Universele Beheer is 'n tipiese werkvloei tydens vermenging, waar lae-latency-monitering nie nodig is nie en buffervertraging nie 'n probleem is nie, want die snitte is reeds aangeteken. Wanneer nuwe snitte opgeneem word, word die DAW- en Universal Control-werkvloei (soos beskryf in die volgende afdeling) aanbeveel.
• In hierdie scenario funksioneer Quantum as 'n oudio-koppelvlak. Die DAW kry toegang tot en stuur Quantum se oudio-koppelvlak I/O via die toestelbestuurders. Oudio I/O latency word bepaal deur die I/O Buffer Size instelling.

Met 'n DAW (met universele beheer)

• Universele beheer word gelyktydig met 'n DAW gebruik wanneer lae-latency monitering verlang word. Hierdie werkvloei skakel die I/O-buffervertragings wat verband hou met sagtewaremonitering heeltemal uit. In hierdie scenario word Universele Beheer gebruik om alle toevoermonitering tydens opname te beheer, en die DAW se sagtewaremoniteringfunksie moet gedeaktiveer word.

Sagtewaremonitering versus hardewaremonitering

• Sagtewaremonitering (luister na regstreekse insette via die DAW-menger) het 'n merkbare latensie as gevolg van oudio-koppelvlak I/O-buffering. Hardewaremonitering via 'n oudio-koppelvlak se interne DSP-menger (bv. die Universal Control-toepassing) het nie waarneembare latensie nie, want die lewendige klank word intern direk vanaf die insette na die uitsette gestuur sonder DAW I/O-buffering.

Monitering met universele beheer

• Die primêre funksie van Universal Control is die monitering van Quantum-insette tydens lewendige optrede. Wanneer dit saam met 'n DAW gebruik word, word Universal Control gebruik as 'n monitormenger wat apart van die DAW se sagteware-moniteringsmenger funksioneer.
• Maak seker dat jy Sagtewaremonitering in die DAW deaktiveer wanneer jy Universele Beheer gebruik. Wanneer Universele Beheer vir regstreekse invoermonitering met 'n DAW gebruik word, moet die DAW se sagtewaremoniteringsfunksie gedeaktiveer wees. Indien nie, phasing en/of verdubbeling van die gemonitorde sein(e) sal plaasvind omdat die insetsein twee keer gehoor word – eers vanaf die lae-latensie DSP-mengsel (Universal Control) en kort daarna vanaf die hoër-latensie sagtewaremengsel (DAW).

Terugloop
Quantum’s device drivers carry virtual (software only) input and output channels in addition to those directly associated with the hardware inputs and outputs. Loopback facilitates highly flexible signal routing via the DAW, without needing to reach behind the gear rack for manual cable patching. Additionally, since the loopback audio streams are in the digital domain, a pristine audio signal path is maintained without requiring additional A/D – D/A conversions. Loopback sends enable any input to be routed directly into Universal Control’s FlexChannel (see section 2.3.2 in this manual for more information).

Toestel-terugstelling
As jy 'n probleem met jou Quantum teëkom en jy moet die toestel terugstel, kan jy terugstel na die verstek toestelinstellings of teruggaan na 'n vorige firmware.

Verstek toestelinstellings
Indien nodig, kan jy die verstekmenger herstel (preamp gain, output levels, etc.) and system settings (speaker switching modes, headphone mix sources, etc). To restore the default system settings:

• In Universele Beheer, gaan na Instellings (ratikoon)
• Druk die "Factory Reset" knoppie
• 'n Bevestigingsblokkie sal verskyn
• Kies "Herstel" om te bevestig of "Kanselleer" om die terugstelling te kanselleer

Keer terug na Vorige Firmware
Om terug te keer na 'n vorige firmware:

1. Deïnstalleer die huidige weergawe van Universal Control
2. Installeer die weergawe van Universal Control wat die vorige firmware het
3. Met die Quantum aangeskakel, maak Universal Control oop en klik "Update Firmware"
4. 'n Kennisgewing sal sê dat jou firmware op datum is en in elk geval moet opdateer
5. Kies "Dateer in elk geval op" en volg die proses

Let wel:
If your Quantum HD ever becomes unresponsive, press and hold the knob while powering on to enter firmware recovery mode.

Quantum Control from Fender Studio Pro
Your Quantum HD interface can be controlled directly from Fender Studio Pro (only compatible with version 6.6.1 or higher). After configuring the inputs and outputs of your interface within Fender Studio Pro, you’ll have easy control over various channel parameters, including channel Preamp Gain, Phantom Power, High Pass Filter, Auto Gain and Pad (HD only). To set up your Quantum Interface in Fender Studio Pro, follow the directions below. Once all cable connections are made and you have updated the Quantum’s firmware:

1. Launch Fender Studio Pro.
2. Navigate to Studio Pro/Options/Audio Setup/Audio Device (macOS: Preferences/Audio Setup/Audio Device) to open the Audio Device settings window.
3. Kies Quantum as beide die afspeel- en opname-toestel.
4. Konfigureer enige ander oudiotoestel of verwerkinginstellings soos verlang.
5. Klik OK.

I/O-opstelling

• Before creating your first song, it’s recommended that you first configure your Quantum Interface for input and output routing in Fender Studio Pro.
• To route Inputs and Outputs, go to Fender Studio Pro Preferences, then select “Audio Setup”. In the bottom left corner, select “Song Setup” to enter the Audio I/O Setup tab.

Toewysing van hardeware I/O aan sagteware I/O-kanale

• Hardeware-insette en -uitsette word aan sagteware I/O-kanale in 'n matriksroeteerder toegewys, wat 'n visuele voorstelling van die roetering is. Sagtewarekanale (mono en stereo) kry elkeen 'n horisontale ry, en hardeware-insette en -uitsette word vertikale kolomme gegee. Die punte waar hierdie rye en kolomme sny verteenwoordig potensiële verbindings, of roetes, tussen die hardeware I/O en sagteware I/O kanale.
• By default, Fender Studio Pro creates three Input Channels: one stereo and two mono. These channels are labeled Input L+R (stereo), Input L (mono), and Input R (mono). By default, the stereo Input Channel receives input from the first stereo hardware input pair of your selected audio device. The two mono Channels receive input from the same stereo hardware input pair. The Output Channel is labeled Main Out (stereo) and is routed by default to the first stereo hardware output pair of your selected audio device.
• Om 'n roete tussen sagteware-I/O-kanale en hardeware-I/O te skep, klik op die leë vierkant by die kruising van die verlangde hardeware-invoer of -uitset en die sagtewarekanaal-invoer of -uitvoer. 'n Gekleurde vierkant verskyn met 'n M-, L- of R-etiket, wat aandui of die roete 'n monoroete (M) of die linker- of regterkant van 'n stereoroete (L of R) is.
• Let wel: By hoër sample rates, the number of available ADAT Inputs and outputs is reduced for each port. At 88.2/96 kHz, only ADAT channels 1–8 are available, and all digital is disabled at sample tariewe hoër as 96 kHz. Onbeskikbare ADAT-kanale word in kursief teks in die Invoer-, Uitvoer-, Bus- en Invoegbladsye van die I/O-opstelling aangedui.

Kwantuminvoeropstelling
From the Inputs tab, you can enable any or all of the inputs on your Fender Quantum audio interface that you’d like to have available. Use the “Add” button options below the matrix to add new inputs.

Geïntegreerde kwantumkenmerke

Kwantumuitsetopstelling
Om die uitsetroetering te wysig, klik op die "Uitsette"-oortjie en voeg uitsette by met behulp van die Voeg-knoppies onder die matriksroeteerder.

Verstek Toestel I/O-opstelling
We recommend that you create a default Audio I/O Setup that can be a starting point for all new Songs. This lets you immediately begin working on your new Song, with little or no preliminary setup. To do so, create software I/O channels for all of your audio device’s commonly used inputs and outputs and name them appropriately. Then, click on the “Make Default” button in the Audio I/O Setup menu, and a pop-up window appears to confirm that you wish to make the current I/O setup the default for new Songs. Click “Yes”, and from that point forward, all new Songs will be created with this audio I/O setup. You can always use the “Reset to Default” button to apply this configuration to a song.

Geïntegreerde kwantumkenmerke
Fender Studio Pro channel strips have integrated Quantum hardware controls built in when Quantum is selected as the Playback and Recording device in Studio One Pro. To access these control features, open the “Mix” console view from the Fender Studio Pro song page.

Kanaalbeheerkenmerke
Die kanaalbeheerkenmerke sal in die bokant van elke kanaal ingebed word.

• Preamp Verhoog vlak. Gebruik hierdie kontrole om die versterking (0 dB tot +75 dB) vir jou mikrofoon of instrument te stel.
• Lyninvoervlak. As 'n lynvlaksein deur die TRS-poort van die kombinasie-aansluiting verbind is, dan preamp verkry beheer skakel oor na 'n lynvlakbeheer (-12 dB tot +12 dB).
• Verkry waarde. Vertoon die absolute waarde vir die huidige wins. Dubbelklik op die waarde om 'n spesifieke waarde in te voer.
• Hoogdeurlaatfilter. Skakel 'n HPF in / ontkoppel by 80 Hz met 'n helling van 12 dB per oktaaf.
• Phantom Power (48V). Engages / disengages 48V phantom power for use with condenser microphones.
• Outo-aanwins. Stel outomaties die versterkingsvlak vir die geselekteerde kanaal.
• Pad: Reduces the overall gain level for the channel by -20 dB (microphone only).

Additional Fender Studio Pro Resources

Kwantumhardeware-uitsetkontroles
Fender Studio Pro has integrated Quantum hardware output controls built in when Quantum is selected as the Playback and Recording device in Fender Studio Pro.

• Headphone Source Selector. Select the source for the Headphone Output 1 or 2.
• Monitor. Kies watter luidspreker(s) deur die knop beheer word.
• Dim. Verminder die hoofuitvoer met die hoeveelheid wat in Instellings gestel is (verstek is -10 dB).
• Demp. Demp die hoofuitvoer. Let daarop dat demp nie oorfone beïnvloed nie.
• Speaker Switching toggle. When Speaker Switching is active, it changes to either speaker set A or speaker set B.
• Luidsprekerskakeling. Kies die gedrag vir luidsprekerskakeling wanneer die Monitors-beheerknoppie gedruk word.

Let wel:
If you do not see either of these Quantum controls within Fender Studio Pro, make sure that the “Audio device controls” option is checked in the channel options:

Additional Fender Studio Pro Resources

• Operating instructions for Fender Studio Pro is beyond the scope of this Owner’s Manual, but Fender Studio Pro comes bundled with an array of demo and tutorial materials. For more detailed information about all of the available features in Fender Studio Pro, check out the Fender Studio Pro User Manual. You can access this manual at any time while Fender Studio Pro is open by navigating to Help/Fender Studio Pro User Manual or by pressing the F1 key on your keyboard.
• 311 CESSNA SIRKEL
• CORONA, CALIF. 92878
• VSA WWW.FENDER.COM
• ©2026 Fender Musical Instruments Corporation. All Rights Reserved. The Fender logo (plain and stylized) Fender Studio, and Fender Studio Pro are trademarks of FMIC. Mac, macOS, iOS, and iPadOS are registered trademarks of Apple, Inc., in the U.S. and other countries. Windows is a registered trademark of Microsoft, Inc., in the U.S. and other countries. ASIO is a trademark and software of Steinberg Media Technologies GmbH. VST is a trademark of Steinberg Media Technologies GmbH.
  Ander produkname wat hierin genoem word, kan handelsmerke van hul onderskeie maatskappye wees. Alle spesifikasies onderhewig aan verandering sonder kennisgewing.

Gereelde vrae