Digilog 12V DC RGB LED Ligstrookdrywer IR Afstandbeheerder
Spesifikasies
Werk temperatuur: -20-60°C
Produk grootte: L62xB35xH23mm
Netto gewig: 60g
Uitset: Drie CMOS dreineer-oop uitset
Maksimum lasstroom: 2 A each color
Voorsiening voltage: DC12V
Pakketgrootte: L105xB65xH55mm
Bruto gewig: 90g
Verbindingsmodus: Algemene anode
Beheer metode
Adopt IR remoter to control the led controller, which has 44 buttons, the function of each button as the table below.
| Helderheid styg | Helderheid val | Pouse/hardloop | Aan/Af |
| Statiese rooi | Statiese groen | Statiese blou | Staties wit |
| Statiese oranje | Statiese liggroen | Statiese donkerblou | Statiese melkwit |
| Statiese donkergeel | Static dyan | Static Ions blue | Statiese wit pienk |
| Statiese geel | Statiese ligblou | Statiese pers | Statiese groen-wit |
| Statiese liggeel | Statiese lugblou | Staties bruin | Statiese blou wit |
| Increase red | Verhoog groen | Verhoog blou | Versnel |
| Verminder rooi | Verminder groen | Verminder blou | Spoed af |
| DIY sleutel 1 | DIY sleutel 2 | DIY sleutel 3 | Outomatiese verandering |
| DIY sleutel 4 | DIY sleutel 5 | DIY sleutel 6 | Flits aan en af |
| 3 kleur springagtige verandering | 7 kleur springagtige verandering | 3 kleur vervaag verandering | 7 kleur vervaag verandering |
About DIY key, when it’s pressed first time, will enter the DIY color mode, you can adjust the color per the 6 keys at above to increase or decrease the R/G/B color by yourself freely (if other key is pressed this time, will jump out from DIY color mode). And you can save the color which you have adjusted by pressing the DIY key once again. When next time this key is pressed, it will show the color you saved last time.
There are 6 DIY keys, so you can save 6 color you like. They are all Independent, have no effect each other.
Byvoorbeeldample: if you press DIY key1 first, and then press DIY key2, DIY key1 will be invalid, until DIY key2 is pressed once again, current color will be saved.
Panel Specification And Connecting Drawing As Follows
Waarskuwing
- Voorsiening voltage van hierdie produk is DC12V moet nooit aan DC24V of AC220V koppel nie.
- Moet nooit twee drade direk verbind in geval van kortsluiting nie.
- Looddraad moet korrek verbind word volgens kleure wat die verbindingsdiagram bied.
- Warranty of this product is one year, in this period we guarantee replacement or repairing with no charge, but exclude the artificial situation of damaged or overload working.
Dokumente / Hulpbronne
 |
Digilog 12V DC RGB LED Ligstrookdrywer IR Afstandbeheerder [pdf] Instruksiehandleiding 12V DC RGB LED Light Strip Driver IR Remote Controller, LED Light Strip Driver IR Remote Controller, Light Strip Driver IR Remote Controller, Strip Driver IR Remote Controller, Driver IR Remote Controller, IR Remote Controller, Controller |