CHT SP1133 Draadlose Beheerder Gebruikershandleiding

CHT SP1133 Wireless Controller

Produkbeskrywing

This product is mainly designed for PC and supports NS(Nintendo Switch) mode, BT, and 2.4G dongle for wireless PC gaming controllers. In NS mode, the controller connects to the Switch console via BT. It can also connect wirelessly via BT to Android/iOS devices and laptops. Additionally, it supports wireless connection to desktop PCs via dongle. Compatible with PC systems including XP, WIN7, WIN8, WIN10, and WIN11, the controller supports PC modes: X_INPUT/D_INPUT/NS mode.

Produk Kenmerke

1. This product mainly features PC functions, including rapid fire, motor vibration adjustment, M1/2 mapping function, and macro functionality.
2. Verskaf vier LED-statusaanwysers: Rooi/Wit/Groen/Blou.
3. 18 funksionele knoppies met 'n driemodusskakelaar: NS/BT/Dongle, gerieflik vir aanvanklike paring.
4. Ingeboude dubbele motors, hoë-presisie Hall 3D joystick; die Hall sensorbord het 'n skakelaar omskakelingsfunksie, met lang modus wat analoog uitvoer bied en kort modus wat direk 255 uitvoer.
5. Toegerus met twee aanpasbare knoppies M1/M2 aan die agterkant, wat ingestel kan word vir kartering- en makrofunksies.
6. Hou die + knoppie/– knoppie vir 3 sekondes ingedruk om tussen X_invoer/D_invoer/NS modus te wissel.
7. Sluit 'n 6-as-giro in vir vinnige en akkurate teikenvergrendeling.
8. Die beheerder ondersteun bedrade verbinding met 'n rekenaar vir sagteware-opgraderings en ondersteun X/D-INPUT/NS-modus wanneer dit beide bedraad en draadloos gekoppel is.
9. Die beheerder beskik oor RGB-beligtingseffekte aan beide kante, elke kant met vier 1615 RGB-ligte.
10. The controller is activated through charging, other methods cannot activate it.
11. Sodra die beheerder met die SWITCH-konsole/Android/IOS-toestel/rekenaar gekoppel is, sal dit outomaties na slaapmodus gaan na ongeveer 5 minute van onaktiwiteit.
12. Laaimetode: kan gelaai word via 'n tipe-C-poort of met behulp van die laaidok.
13. Die beheerder moet 'n pollingtempo van 1000 Hz ondersteun wanneer dit via kabel aan 'n rekenaar of draadloos met die dongle gekoppel is.

Kenmerkbeskrywing

1. Two connection methods are available for controllers on a switch console:
   1. Wired connection utilizing a USB data cable.
   2. Wireless BT pairing.

NS (Skakel) Modus Konneksie

1. Controller connection to the Nintendo Switch console: when the controller button on the controller for 3 seconds until the white LED indicator flashes rapidly.Open the pairing menu on the Switch console pairing. Once paired successfully, all controller functions will work normally, and the console-assigned Indicator light will remain steady. If pairing fails, the controller will automatically enter sleep mode after approximately 60 seconds. If pairing is successful but left idle, the controller will automatically sleep after about 5 minutes.
2. Bedrade leiding vir BT-paring: nadat die beheerder via 'n USB-datakabel aan die Nintendo Switch-konsole gekoppel is, druk enige knoppie op die beheerder om dit wakker te maak. Sodra die datakabel ontkoppel is, sal die beheerder outomaties via BT aan die Nintendo Switch-konsole koppel. Tot vier beheerders kan gelyktydig aan die NS-konsole koppel, met toegewyse aanwyserligte: Rooi/Wit/Groen/Blou LED's bly konstant brand.

BT -modus

1. Supports connection to Android devices/IOS devices/laptops. When the controller is in sleep mode.
   1. BT Connection for Android Devices: turn on the BT settings of your device(e.g., phone, TV). Switch the controller mode to “BT” mode. Press and hold the HOME button on the controller for 3s until the status indicator LED flashes blue rapidly, indicating it has entered pairing mode for Android devices. Soek vir die BT-toestel met die naam "XBOX Wireless Controller" op jou toestel, klik dan om te koppel en te koppel. Sodra dit suksesvol gekoppel is, sal die blou LED aanbly.
   2. Bluetooth Connection for iOS Devices: with the controller in sleep mode and the mode switch in the “BT” position, press and hold the HOME button for 3 s. The blue LED will flash rapidly, indicating it has entered pairing mode. Soek vir the Bluetooth device named “XBOX Wireless Controller” on your iOS device, then click to pair and connect. Once paired successfully, the blue LED will stay lit. The next time you wake the controller by pressing any button (with the mode switch in the “BT” position), it will automatically reconnect to the previously paired Android or iOS device. If pairing is unsuccessful, the controller will enter sleep mode after about 60s. If there is no activity after successful pairing, the controller will enter sleep mode after about 5 min.
   3. Bluetooth Connection for Laptops: With the controller in sleep mode and the mode switch in the “BT” position, press and hold the HOME button for 3 s. The blue LED will flash rapidly, indicating it has entered pairing mode. Soek vir die Bluetooth-toestel met die naam "XBOX Wireless Controller" op jou skootrekenaar, klik dan om te koppel en te koppel. Sodra dit suksesvol gekoppel is, sal die blou LED aanbly.

Donglemodus:

Die beheerder het twee verbindingsmetodes met die 2.4G Dongle:

1. Set the controller mode switch to the dongle position. While the controller is in sleep mode, press and hold the HOME button for 3 seconds until the red LED on the controller flashes rapidly.Plug the dongle into the PC’s USB port, then press the “Pairing” button on the dongle for 3 seconds until the green LED on the dongle flashes rapidly. At this point, the dongle and the controller will pair. Once successfully connected, the green LED on the dongle will stay lit, and the red LED on the controller’s indicator light will also stay lit. If pairing fails, the controller will automatically enter sleep mode after about 60 seconds. If pairing succeeds but there is no activity, the controller will automatically enter sleep mode after about 5 minutes.
2. After the controller is connected to the dongle, it supports X-INPUT functionality by default. The system assigns a solid red indicator LED, and the device name appears as “Xbox Wireless Controller” (PC must have the Xbox 360 driver installed). Press and hold the +/- buttons for 3 seconds to switch to NS mode. The system assigns a solid blue indicator LED, and the device name will be displayed as”XBOX Wireless Controller”.To switch to D-INPUT mode, press and hold the +/- buttons for 3s. The device will be displayed as”XBOX Wireless Controller,” and the controller’s indicator light will stay lit with both red and blue lights.

"TUIS"-knoppie werking

Die beheerder gaan vinnig in slaapmodus. Wanneer die beheerder aangeskakel is, druk en hou die "HOME"-knoppie vir 5 sekondes in om die beheerder in slaapmodus te plaas.

Beheerderbeskrywing

1. The controller supports wired connection to a PC, with the device name displayed as “Xbox Wireless Controller”(requires Xbox 360 drivers installed on the PC).
2. Die beheerder ondersteun nie firmware-opgraderings via die Nintendo Switch-konsole nie. Jy sal ons sagteware moet aflaai en dit aan 'n rekenaar moet koppel (As sekere beheerderfunksies nie behoorlik werk nie as gevolg van 'n Nintendo Switch-stelselweergawe-opdatering, kontak asseblief ons maatskappy om die sagteware en opgraderingsinstruksies vir firmware-opdaterings te bekom).
3. The controller supports wake-up using any key: (excluding L3, R3, M1, M2, and the trigger modeswitch). After waking up, the controller enters the reconnection state. The white and green lights will flash in a flowing pattern. If the controller was previously paired with an NS/BT/receiver (based onthe mode switch position) and the pairing has not been cleared, or if it was paired in another mode,the mode switch will automatically enable the reconnection function.
4. Die beheerknoppies sluit in OP, AF, LINKS, REGS, A, B, X, Y, L, R, ZL, ZR, L3, R3, View button, HOME, Menu button, and “M”-18 functional buttons in total, along with two mapping buttons (M1, M2).It is also equipped with left and right 3D joysticks.
5. Die beheerder het 'n vibrasiefunksie. Op die Nintendo Switch-konsole kan jy die motorvibrasie handmatig aan- of afskakel in die "Instellings"-kieslys. Die beheerder ondersteun ook die aanpassing van vibrasie-intensiteit. Wanneer dit aan 'n rekenaar gekoppel is, hou die "M"-knoppie op die beheerder in en beweeg die linker 3D-joystick op of af om die motorvibrasie-intensiteit te verhoog of te verlaag. Daar is vier vlakke beskikbaar: 100%-60%-30%-0%. (Wanneer die motorvibrasie aangepas word deur die "M"-knoppie in te hou, moenie langer as 5 sekondes hou nie. Die instellings word gestoor nadat dit afgeskakel is, en die fabrieksherstel sluit die vibrasie-intensiteit tot die verstek 60%.)
6. Die beheerder se terugknoppies, M1 en M2, kan aangepas word. Die volgende funksieknoppies kan gekarteer word: OP, AF, LINKS, REGS, A, B, X, Y, L1, R1, ZL, ZR, “-“, “+”, en enige rigting van die linker- en regter 3D-joysticks.

Karteringsproses:

1. After connecting to NS/BT/Dongle, hold M+M1. The left RGB light will slowly flash white, indicating entry into mapping mode.
2. Sodra jy in M1-aanpassingsmodus is, druk 'n knoppie (bv. "A"). Druk dan weer M1; die RGB-liggie sal een keer flikker, wat bevestig dat "A" nou aan M1 gekoppel is. Volg dieselfde stappe vir M2.
3. You can assign multiple function keys to M1 (M2) by holding M + M1 and inputting keys sequentially. When pressed in-game, the macro will execute based on the time intervals between the input keys. Each M1/M2 macro can store up to 16 key inputs. Clearing M1 & M2 Customization: while connected to a Nintendo Switch console or PC, mapping steps to clear the customized feature of M1. The M2 function clearing process is the same as M1. After clearing, the button will have no assigned function.(Custom settings are saved after shutdown; however, a factory reset will remove all custom functions assigned to M1 and M2.)  The Controller Supports A Turbo (rapid-fire) Function (1) hold down the “M” button and press one of the function buttons (A/B/X/Y, L1/R1, ZL/ZR) to enable the rapid-fire function. It will have a turbo function with light indicators. The TURBO button functionality applies to eight keys: A/B/X/Y, L1/R1, ZL/ZR. After setting the rapid-fire function, you can switch between manual rapid-fire, automatic rapid-fire, or single-shot. To cancel the rapid-fire function for a specific key, repeat the steps above or hold down the “M” button for 5 seconds. (2) The controller supports adjustable turbo speed: hold the M button + move the right joystick up/down to adjust the turbo speed between three levels: Fast, Medium, and Slow.(Turbo speed settings and key values are saved after shutdown. However, if a factory reset is performed, any custom functions assigned to the TURBO button and turbo speed settings will be cleared, restoring the default medium speed and single-shot mode.)

Snellerstop vir kort- of langritbediening

Wanneer die sneller in langafstandmodus is, verskaf die druk van die linker- of regtersneller 'n analoogfunksie met 'n reeks van 1 tot 255, vergesel van vibrasieterugvoer. Wanneer die sneller na kortafstandmodus oorgeskakel word, bereik die druk van die linker- of regtersneller onmiddellik 255, ook vergesel van vibrasieterugvoer.

RGB-beligtingseffekinstellings

Instruksies vir RGB-beligtingwerking:

Note: RGB lighting effects can only be adjusted when the controller is connected to the NS console orPC via wired/wireless connection. RGB effects cannot be adjusted while the controller is charging onthe dock.

1. Modus 1: Reënboogmodus (standaard).
2. Mode 2: Lightning mode. In this mode, simultaneously press the left and right 3D buttons once(pause for 100 microseconds) to switch the light color combination.The color changes once with the key combination (L3, R3).
3. Modus 3: Veelkleurige siklusasemhalingsmodus.
4. Mode 4: In this mode, simultaneously press the left and right 3D buttons once(pause for 100 microseconds) to switch the light color combination. The color changes once with thekey combination (L3, R3).

You can adjust the brightness of the RGB lighting with the following key combinations. There are four levels: 25%, 50%, 75%, and 100% . Decrease RGB brightness: M + left joystick right direction.IncreaseRGB brightness: M + left joystick left direction.Press and hold M + “R3” for 5 seconds to turn off the RGB lighting. Press and hold M + “R3” for 5 seconds again to turn it back on. The current state is saved after powering off. Press the M button + “R3” button briefly (pause for 100 microseconds)once to switch to one RGB lighting effect, cycling through Mode 1, Mode 2, Mode 3, Mode 4, andthen back to Mode 1 (in a loop).(The lighting settings are saved after powering off. Restoring factorysettings will clear the lighting settings, with the default set to Rainbow mode.)

Kieslys en M-knoppie

1. Die View knoppie / Kieslysknoppie / “M”-knoppie dien as die View function and Menu function when connected to a PC or Android/IOS device. The “M” button has a rapid-fire function and a motor vibration adjustment function. When used with the Nintendo SWITCH console, the View button functions as the “-” button, the Menu button functions as the “+” button, and the “M” button serves as the screenshot function.
2. Om die skermkiekiefunksie met die "M"-knoppie op die Nintendo Switch-konsole te aktiveer, moet die "M"-knoppie twee keer gedruk word om die funksie te aktiveer.

Laai/Herstel-operasie

1. Charging via adapter: plug the controller into the Type-C port to charge it. The channel light willglow a constant red LED and will switch off once the charging is complete.
2. Kragbronlaai: koppel direk aan die Tipe-C-poort van die beheerder om dit te laai. Die kanaalliggie sal 'n konstante rooi LED gloei, en die liggie sal afskakel sodra die beheerder volledig gelaai is.
3. When charging the controller while it is connected to a device, the channel light will display aslowly flashing red LED, and the light will turn off once the controller is fully charged.

Lae battery waarskuwing

Wanneer die beheerder se battery voltage drops below 3.5V, the channel’s red LED will flash rapidly toindicate low battery, signaling that the controller needs to be charged.

Standby

When the controller is powered on, press and hold the “HOME button” for 5s to put the controller into sleep mode. When the controller is in pairing mode, it will automatically enter sleep mode if itfails to pair within 60s. When the controller is connected to the console but remains inactive for approximately 5 min, it will automatically enter sleep mode.

Herstel Function

Indien die beheerder wanfunksioneer, kan jy dit herstel deur die herstelknoppie deur die herstelgat te druk.

Ontvang afstand

Die effektiewe ontvangsafstand van die beheerder is binne 10 meter.

Verwysstroom

Sleep mode current: Less than 20μA. Pairing current: Less than 45mA.
Hierdie produk ondersteun laai via die Nintendo SWITCH-dok en beskik oor 'n draadlose wekfunksie.

Kontroleerder elektriese spesifikasies

• Kragtoevoer: Ingeboude polimeerbattery
• Gebruikstyd: Ongeveer 6 tot 8 uur aaneenlopende gebruik
• Batterykapasiteit: 800mAH
• Laaityd: Ongeveer 3 uur
• Laai VoltagE: DC5V
• Laaistroom: 390mA
• Bedryfstroom: 290mA (Maksimum stroom wanneer motorvibrasie en RGB op maksimum gestel is)

3D Joystick/Giroskoop Fabriek Kalibrasie

In the controller’s sleep mode, press L3 + R1 to enter joystick and trigger calibration. At this time, the red and green lights will flash alternately. Rotate the joystick forcefully for 2 full circles and press the trigger all the way down 2 times. Then, place the controller on a flat surface and press the A button again to complete the joystick and trigger calibration. The controller will automatically proceed to motion calibration, indicated by a flashing blue light. Once motion calibration is complete,the controller will automatically return to sleep mode.

Instelling van die fabriekssluitmodus van die beheerder

In the controller’s sleep mode, simultaneously press and hold the left 3D joystick (L3 button), the right 3D joystick (R3 button), and the “M button” for 3 seconds. The indicator lights will all illuminate briefly and then turn off, indicating that the controller has entered factory lock mode. (In factorylock mode, the controller disables the wake-up function for any button, preventing frequent connection issues caused by accidental touches during packaging and transportation.) (After setting the factory lock mode: Defaults to X_input mode.)

Verlaat fabriekssluitmodus

When the controller is in factory lock mode, all buttons are disabled for wake-up. To exit “factorymode,” you must charge the controller using a USB data cable at least once. Once charged, thecontroller’s functionality will be restored.

Opgradering van beheerder-firmware

1. If certain functions of the controller become unavailable due to a console system upgrade or if a functional update is required, the controller firmware can be upgraded via a PC. Double-click to openthe software: **”GDF-G560637_74A7_V1.0_250110.exe”** as shown in the figure below:
2. When the controller is in sleep mode or powered on, connect it to the PC using a USB cable . Simultaneously press and hold HOME + X + Y for 3 seconds to enter upgrade mode (the “Online” indicator will turn green). The “Update Firmware” button will change from gray to black. Click “UpdateFirmware” to proceed with the upgrade, as shown in the figure below. This indicates a successful connection.
3. Maak seker dat die datakabel stabiel gekoppel bly tydens die opgraderingsproses. Sodra die opgradering voltooi is, sal die skerm soos in die prentjie hieronder wys:

Dongle firmware-opgradering

open receiver software: Customer_GDF-G760326_8DC9_V10_250213a.exe as shown in Figure (A), insert the receiver intothe usb port of the PC, and hold down the receiver “Docking key” for 5 seconds. The receiver enters the upgrade mode and”OFFLINE” turns red and green as shown in Figure B, Click “Update mode” to upgrade the receiver software successfully.

GameMacro-app

1. Om die GameMacro-app te installeer: Maak jou selfoon of tablet oop, gebruik WeChat om die QR-kode te skandeer en laai die "GameMacro-app" af.
2. Vind die Bluetooth-naam wat verband hou met GameMacro in jou foon se Bluetooth-lys en koppel om te koppel.
3. Nadat u die toepassing oopgemaak het, tik die "+"-ikoon in die linker boonste hoek, kies die beheerder wat so pas via die stelsel se Bluetooth gekoppel is en voltooi die verbinding.
4. Vir herverbinding, maak seker dat die foon se stelsel se Bluetooth en die beheerder reeds gekoppel is. Jy kan die voorheen gekoppelde toestel uit die geskiedenislys kies om weer te verbind.
5. Indien die verbinding om enige rede misluk, sal die beheerder se probleemoplossingsbladsy op die skerm verskyn. Of jy kan op die regter boonste hoek klik om view solutions to frequently asked questions(FAQs). (The solutions will be further improved based on the controller type at a later stage.)

Beheerder besonderhede

1. The button test in the controller details section is a physical button test. Pressing the controller buttons allows you to test if the controller is functioning properly. (The button values displayed on the page will vary depending on the actual button values of the controller.)
2. The following are the calibration procedures for the gyroscope, joystick and trigger. Complete eachcalibration within 60 seconds as per the instructions
3. Firmware version and download installation. After downloading a new firmware version, you canalso revert to the old version without affecting the use of the app
4. Macro mode and contact mode. Mode switching can be done not only through the combination keys (the switching combination key method needs to be completed according to thecontroller’s manual), but also through the app. Different modes have different pages and different usage scenarios.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:

• Heroriënteer of verskuif die ontvangsantenna.
• Verhoog die skeiding tussen die toerusting en ontvanger.
• Koppel die toerusting aan 'n uitlaat op 'n ander stroombaan as waaraan die ontvanger gekoppel is.
• Raadpleeg die handelaar of 'n ervare radio-/TV-tegnikus vir hulp.

Caution: Any changes or modifications to this device not explicitly the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:

1. Hierdie toestel mag nie skadelike steurings veroorsaak nie, en
2. This device must accept any interference received, including interference that may cause undesired operation.The device has been evaluated to meet general RF exposure requirements

Gereelde vrae

• Q: How do I switch between X_INPUT, D_INPUT, and NS modes on my PC?
  • A: Press and hold the +/- buttons for 3 seconds to switch modes.