Premier manufacturer of architectural door hardware, including locks, cylinders, exit devices, and door closers, part of the ASSA ABLOY Group.
SARGENT Manufacturing Company is a market leader in the architectural door hardware industry, renowned for its high-quality locks, cylinders, door closers, and exit devices. Operating as a key brand within the ASSA ABLOY Group, SARGENT delivers innovative security and safety solutions designed for commercial institutions such as schools, hospitals, and office buildings.
While the core brand identity focuses on door security, the name SARGENT is also shared by distinct manufacturers such as Sargent Electrical Services (power units for leisure vehicles) and Sargent Cycle Products (motorcycle seats). The manuals provided here may cover products from these various entities.
Nuutste handleidings van manuals+ saamgestel vir hierdie handelsmerk.
Algemene vrae oor handleidings, registrasie en ondersteuning vir hierdie handelsmerk.
Using a hex wrench (typically 1/8"), turn the adjustment valves located on the closer body. Turning clockwise generally slows the closing speed, while turning counter-clockwise increases it. Refer to the specific model template for valve locations.
Check the door alignment and ensured the strike plate is not binding against the latch. If the lock mechanism itself feels stiff, verify that the through-bolts are not over-tightened, as this can compress the chassis.
Most SARGENT surface closers, such as the 351 and 1431 series, are non-handed and can be installed on left or right-hand doors. However, specific arms (like the PH10 holder arm) may be handed.