TAXNELE THC30A Digital Programmable Timer Switch User Manual

1. Inleiding

The TAXNELE THC30A is a digital electronic timer switch designed for automated control of various electrical equipment. It features daily and weekly programming capabilities, allowing for up to 20 ON/OFF settings. This device is suitable for DIN rail mounting and includes a 3V Lithium battery for power reserve, ensuring time and program data are maintained during power interruptions.

2. Produkkenmerke

• Programmable Control: Up to 20 ON/OFF settings per day or week.
• Handmatige vervanging: Allows for temporary manual control (ON/AUTO/OFF).
• Afskakelgeheue: Built-in 3V Lithium battery (CR2032) maintains timing, display, and program data for up to 3 years during power outages.
• Hoë presisie: Industrial-grade chip for accurate timing.
• LCD-skerm: Clear digital display for easy programming and monitoring.
• DIN-spoormontering: Designed for easy installation on standard DIN rails.
• Wye toepassing: Suitable for street lights, neon lamps, advertising signs, production equipment, broadcast devices, and other power control applications.

Prent 2.1: The THC30A timer features a power-off memory function, supported by an internal CR2032 lithium battery, which retains settings and time for extended periods without external power.

3. Veiligheidsinligting

Lees en verstaan ​​asseblief alle veiligheidsinstruksies voor installasie en gebruik. Versuim om hierdie instruksies te volg, kan lei tot elektriese skok, brand of ernstige besering.

• Always disconnect power at the circuit breaker or fuse box before installing or servicing the timer switch.
• Installasie moet deur 'n gekwalifiseerde elektrisiën of kundige persoon uitgevoer word.
• Verseker die voltage and current ratings of the timer match your application requirements.
• Do not exceed the maximum load capacity of 30A or 5000W.
• Moet nie in nat of damp environments unless specifically rated for such conditions.
• Hou kinders weg van elektriese toestelle.

4. Opstelling

4.1 Bedradingsdiagram

The THC30A timer is designed for easy wiring. Connect the input power (Live 'L' and Neutral 'N') to the 'IN' terminals and the load (e.g., light, appliance) to the 'OUT' terminals. Ensure correct polarity.

Prent 4.1: Simplified wiring diagram for the THC30A timer, illustrating connections for input power (IN) and output to the load (OUT).

4.2 Initial Power-up and Reset

Upon initial power-up or after a prolonged power outage, the LCD display may be blank. The internal battery will charge, and the display should activate. If the display is erratic or unresponsive, press the TERUGSTEL button using a pointed object (e.g., a pen tip) to clear all settings and restore default values.

Prent 4.2: Gedetailleerd view of the THC30A timer's LCD screen, control buttons (P, D+, H+, M+, RESET, MANUAL), and working indicator.

4.3 Instelling van Huidige Tyd

1. Druk die KLOK button (P) and hold it.
2. Terwyl jy vashou KLOK, druk D+ to set the current day of the week (MON, TUE, WED, THU, FRI, SAT, SUN).
3. Terwyl jy vashou KLOK, druk H+ om die huidige uur in te stel (0-23).
4. Terwyl jy vashou KLOK, druk M+ om die huidige minuut (0-59) in te stel.
5. Los die KLOK knoppie om die instellings te stoor.

5. Bedryfsinstruksies

5.1 Programmering van AAN/AF Tye

The THC30A allows for up to 20 ON/OFF program settings. Each program consists of an ON time and an OFF time.

Prent 5.1: The THC30A timer's programming interface, highlighting its capacity for 20 ON/OFF settings, daily/weekly cycling, auto ON/OFF status, and a minimum setting time of 1 minute.

1. Druk die P button (Program) once. The display will show '1 ON'.
2. Druk D+ to select the day(s) for this ON setting. You can choose a single day, a block of days (e.g., MON-FRI), or all 7 days.
3. Druk H+ to set the desired hour for the '1 ON' time.
4. Druk M+ to set the desired minute for the '1 ON' time.
5. Druk P weer. Die skerm sal '1 AF' wys.
6. Repeat steps 2-4 to set the day(s), hour, and minute for the '1 OFF' time.
7. Hou aan druk P to cycle through '2 ON', '2 OFF', up to '20 ON', '20 OFF', setting each program as needed.
8. Nadat al die verlangde programme ingestel is, druk die KLOK button (P) to exit programming mode and return to the current time display.

5.2 Handmatige oorheersing

Die HANDLEIDING button allows you to override the programmed settings temporarily.

• Druk HANDLEIDING once: Switches from AUTO to ON (output is continuously ON).
• Druk HANDLEIDING again: Switches from ON to OFF (output is continuously OFF).
• Druk HANDLEIDING a third time: Switches from OFF to AUTO (timer resumes programmed operation).

6. Onderhoud

6.1 Batteryvervanging

The THC30A timer includes a built-in CR2032 lithium battery for power-off memory. This battery typically lasts for several years. If the display becomes dim or the time/settings are lost frequently during power outages, the battery may need replacement. Consult a qualified technician for battery replacement.

6.2 Skoonmaak

Wipe the timer's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the casing of vertoon.

7. Probleemoplossing

• Die vertoning is leeg: Check power supply. If power is present, the internal battery might be fully discharged; allow time for it to charge. If still blank, press the TERUGSTEL knoppie.
• Timer skakel nie AAN/AF soos geprogrammeer nie:
  • Maak seker dat die timer in is AUTO mode (not ON or OFF via manual override).
  • Verifieer dat die huidige tyd en dag korrek ingestel is.
  • Check that the programmed ON/OFF times and days are correct and active.
  • Confirm wiring connections are secure and correct.
• Load not receiving power: Check the load device (e.g., bulb, motor) for functionality. Verify input power to the timer. Ensure the timer is in an ON state (either programmed ON or manually ON).
• Instellings gaan verlore na kragonderbrekingtage: The internal battery may be depleted. Consider replacing the CR2032 battery.

8. Spesifikasies

Prent 8.1: Dimensions of the TAXNELE THC30A Digital Programmable Timer Switch.

9. Waarborginligting

TAXNELE products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship for a period specified by the retailer at the time of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, unauthorized modification, or natural disasters.

10. Ondersteuning

For technical assistance, troubleshooting, or further inquiries regarding your TAXNELE THC30A Digital Programmable Timer Switch, please contact your retailer or the TAXNELE customer support channel provided with your purchase. When contacting support, please have your product model number (THC30A) and purchase information ready.