RETEVIS RT98

RETEVIS RT98 Mobile Radio User Manual

Model: RT98

Handelsmerk: RETEVIS

1. Inleiding

The Retevis RT98 is a compact and versatile mobile radio transceiver designed for various applications, including car use, amateur radio, and professional settings like banks, hospitals, and bus stations where secure communication is essential. It features automatic dual-way intercommunication, external speaker support, and anti-interference capabilities for clear audio.

Retevis RT98 Mobile Radio on a car dashboard

Figure 1: Retevis RT98 Mobile Radio in a car setting.

2. Sleutel kenmerke

  • Kompakte ontwerp: Mini size (100*106*24mm) and light weight (434g) for easy installation and portability.
  • Dual-Way Intercommunication: Automatic voice intercom without pressing any buttons.
  • Bedryfsmodusse: Supports Amateur and Professional operation modes.
  • Kanaalkapasiteit: 199 programmable memorized channels with editable names.
  • Frekwensiereeks: Available in VHF (136-174MHz) or UHF (400-470MHz) versions.
  • Uitset krag: Adjustable power levels: High (15W), Middle (10W), Low (5W).
  • Klankgehalte: Features ring-shaped speakers with pure amplification and dual voice compression for clear, loud, and stereophonic sound.
  • Ventilasie: Perfect ventilation design for long-term operation without overheating.
  • Long Distance Communication: Stronger signal distance and coverage (5-10KM reference range) to handle complex communication situations.
  • APO (Auto Power-off) Mode: Smart power saving feature that automatically switches off the radio after a preset timer (30, 60, or 120 minutes).
  • Scan Functions: Various scan functions including CTCSS/DCS Scan.
  • Sein: Automatic calling Identification function by CTCSS or DCS signaling (51 CTCSS codes, 1024 DCS codes).
  • Bandwydte: Different bandwidth per channel (25KHz for wide, 12.5KHz for narrow).
  • Frekwensiestap: 2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 30K, 50K.
  • Mikrofoonaanwins: Adjustable microphone gain level (1-16).
  • Squelch: Adjustable squelch level (0-9).

3. Pakketinhoud

The standard package for the Retevis RT98 Mobile Radio includes the following items:

  • 1 x RT98 Mobile Radio Unit
  • 1 x Microphone with coiled cable (permanently attached)
  • 1 x Power Cable (permanently attached)
  • 1 x Install Bracket
  • 1 x lont
  • 2 x Non-slip mats
  • 1 x mikrofoonhanger
  • 2 x Adjusting screws
  • 4 x skroewe
  • 4 x Pads
  • 1 x User Manual (PDF available for download)
  • 1 x Programming Cable (optional, model PC55 / J9171P)
Contents of the Retevis RT98 Mobile Radio package including radio, microphone, cables, mounting bracket, and user manual.

Figure 2: Typical package contents for the Retevis RT98.

4. Produk verbyview

4.1 Voorpaneelkontroles

Front panel of Retevis RT98 showing RX indicator, TX indicator, Function menu key, Memory mode switch key, Scan key, Squelch key, Power on/off and Volume key.

Figure 3: Front panel layout and controls.

  • RX Indicator: Green light indicates receiving.
  • TX Indicator: Red light indicates transmitting.
  • FUN (Function Menu Key): Kry toegang tot die radio se kieslysinstellings.
  • V/M (Memory Mode Switch Key): Wissel tussen VFO (Frekwensie) modus en Geheue (Kanaal) modus.
  • SCA (Scan Key): Initiates or stops scanning.
  • SQL (Squelch Key): Adjusts the squelch level.
  • Power On/Off & Volume Key: Turns the radio on/off and adjusts the audio volume.

4.2 Agterpaneelverbindings

Rear panel of Retevis RT98 showing ANT (antenna) connector, EXT.SP (external speaker) jack, and power cable entry.

Figuur 4: Agterpaneelkonnektors.

  • ANT (Antenna Connector): SO-239 type for connecting an external antenna.
  • EXT.SP (External Speaker Jack): 3.5mm jack for connecting an external speaker.
  • Krag kabel: Permanently attached red/black wires for 13.8V DC power input.

4.3 Mikrofoonkontroles

Microphone of Retevis RT98 showing UP, DN, and PTT (Push to Talk) buttons, and SP01 External Speaker Jack.

Figure 5: Microphone layout and controls.

  • UP/DN Buttons: Used to change frequency or channel number.
  • PTT (druk om te praat): Aktiveer transmissie.
  • SP01 External Speaker Jack: (Note: This appears to be an error in the image, as the external speaker jack is on the main unit's rear panel. The microphone itself does not have an external speaker jack.)

5. Opstelling

5.1 Monteer die radio

The RT98 is designed for mobile installation. Use the provided mounting bracket to secure the radio in a suitable location within your vehicle. Ensure the location allows for proper ventilation and access to controls.

Dimensions of Retevis RT98 Mobile Radio and a table of specifications.

Figure 6: Dimensions of the RT98.

5.2 Kragverbinding

Connect the red wire of the power cable to the positive terminal of your vehicle's 13.8V DC power source, and the black wire to the negative terminal. Ensure a secure connection to prevent power fluctuations. The radio does not have a detachable power connector.

5.3 Antennaverbinding

Connect a suitable VHF (136-174MHz) or UHF (400-470MHz) antenna to the SO-239 (UHF-M) antenna connector on the rear panel of the radio. Ensure the antenna is properly tuned for the operating frequency range to prevent damage to the transceiver.

5.4 External Speaker (Optional)

If desired, connect an external speaker to the 3.5mm EXT.SP jack on the rear panel for enhanced audio output.

5.5 Programming Cable (Optional)

For advanced programming of channels and frequencies, a PC55 / J9171P programming cable can be used to connect the radio to a computer. All functions can also be accessed directly from the radio's front panel and microphone.

Retevis RT98 Mobile Radio with programming cable.

Figure 7: RT98 with optional programming cable.

6. Bedryfsinstruksies

6.1 Aan/Af-skakelaar en volume-aanpassing

Rotate the Power On/Off & Volume key on the front panel clockwise to turn the radio on. Continue rotating to adjust the volume level. Rotate counter-clockwise to decrease volume or turn off the radio.

6.2 Kanaal-/Frekwensiekeuse

Use the UP/DN buttons on the microphone to change the operating frequency or channel number. The frequency step can be selected from the menu (2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 30K, 50K).

6.3 Mode Switching (VFO/Memory)

Druk die V/M button on the front panel to switch between VFO (Frequency) mode and Memory (Channel) mode. Note: The VFO function is currently not available due to a version upgrade.

6.4 Squelch-aanpassing

Druk die SQL button on the front panel to adjust the squelch level (0-9). A higher squelch level requires a stronger signal to open the receiver.

6.5 Funksiekieslys

Druk die PRET button to enter the function menu. Use the volume knob to navigate through menu options and the microphone buttons to select or adjust parameters.

6.6 Power Level Selection

The radio offers three power output levels: High (15W), Middle (10W), and Low (5W). Select the appropriate power level based on your communication needs and environment to optimize battery life and reduce interference.

Retevis RT98 showing three power levels: Max High 15W, Middle 10W, Low 5W, and penetration enhancing range up to 15km.

Figure 8: Tri-Power Adjust feature.

6.7 Automatic Power-off (APO) Mode

The APO function helps save power and extend service life. You can set the radio to automatically switch off after 30 minutes, 1 hour, or 2 hours. This setting can be configured in the function menu (Menu No. 15).

Retevis RT98 with APO Auto Power-off Mode feature, showing the radio automatically switches off when the preset timer runs to end within 30-120 minutes.

Figure 9: APO Auto Power-off Mode.

7. Onderhoud

To ensure optimal performance and longevity of your Retevis RT98, follow these maintenance guidelines:

  • Skoonmaak: Maak die buitekant van die radio gereeld skoon met 'n sagte, damp lap. Vermy die gebruik van harde chemikalieë of oplosmiddels.
  • Verbindings: Periodically check all connections (antenna, power) for tightness and corrosion.
  • Microphone and Power Cable: The microphone and power cable are permanently attached to the radio. Avoid excessive pulling or bending of these cables to prevent internal damage.
  • Ventilasie: Ensure the radio's heat sink on the top surface is not obstructed to allow for proper heat dissipation.

8. Probleemoplossing

8.1 Algemene kwessies en oplossings

  • Whistling/Noise: If you experience whistling or excessive noise, check the installation environment. Increase the distance between the host and the outside speaker, or adjust the volume down.
  • No Sound/Silent: Ensure the power supply is properly connected and not loose. Check the volume adjustment button.
  • Staccato/Choppy Audio: If the speaker is too far from the microphone, move it closer (ideally less than 20cm). If ambient noise is strong, reduce the speaker volume or move closer to the microphone.
  • Radio Not Programming: If the radio does not program with the cable, ensure the correct programming software is used and the cable is properly connected. Contact customer support for the latest software.
  • Cannot Configure Channels: If the radio defaults to a single frequency (e.g., 460.100) and you cannot change channels, a full reset might be necessary.
  • VFO Function Unavailable: Due to a version upgrade, the VFO function (direct frequency input) is currently not available. Please wait for further notice.

9. Spesifikasies

KenmerkSpesifikasie
HandelsnaamRETEVIS
ModelnommerRETEVIS RT98
FrekwensiereeksVHF:136-174MHz or UHF:400-470MHz
Uitsetkrag (W)10w-25w (High:15W, Middle:10W, Low:5W)
Bergingskanaal199CH
Maksimum reeks5 km-10 km
Afmetings100*106*24 mm
Gewig434g
Bedryfsvoltage13.8V DC ± 15%
Kanaalspasiëring25KHz(Wide Band) 12.5KHz(Narrow Band)
Fase-gesluit Stap2.5K,5K,6.25K,10K,12.5K,20K,25K,30K,50K
Druk uitDraer/CTCSS/DCS
Oudiovervorming≤5%
Audio Power Output>2W@16R
Antenna ConnectorUHF-M (SO-239)
OudioaansluitingSpecial (3.5mm for external speaker)
Usable programming cablePC55 / J9171P
SertifiseringCE, FCC

10. Gebruikerswenke

  • Antenne Keuse: For optimal performance, especially in challenging environments, consider using a high-quality external antenna. Some users recommend real Diamond antennas (not copies).
  • Kraguitset: While advertised at 15W max, actual measured output might be closer to 10W. For most urban or short-distance communications (3-5 km), 5W is often sufficient.
  • VFO Function: Be aware that the VFO (direct frequency input) function is currently unavailable due to a product upgrade.
  • Mikrofoon: The microphone is permanently attached. This can be a pro (no connection issues) or a con (less flexibility).
  • Programmering: The radio can be programmed directly from the front panel and microphone, or via a computer using the optional programming cable.
  • Frequency Selection for Russia: For use in Russia, UHF is generally recommended if you do not have a call sign.

11. Waarborg en Ondersteuning

Most new Retevis products come with a two-year manufacturer's warranty from the date of purchase. For detailed warranty information, please refer to the official Retevis website or the separate safety booklet included with your product.

11.1 Waarborg-uitsluitings

Die waarborg dek nie:

  • Damage caused by accident, misuse, or abuse.
  • Unauthorized alterations or repairs.
  • Products with altered, defaced, or removed serial numbers.

11.2 Product Safety and RF Energy Exposure

Before using this radio, please read the safety guide provided in the user manual. This guide contains important operating instructions for safe usage and RF energy awareness to ensure compliance with applicable standards and regulations. Users should be fully aware of and able to control their exposure to meet occupational requirements.

11.3 Kontak ondersteuning

For warranty service or technical support, please contact the seller from whom you purchased the product. You may also find support resources and contact information on the official Retevis webwebwerf.

User manual (PDF) is available for download from the seller's webwebwerf.

Verwante Dokumente - RT98

Preview BAOFENG UV-17R Series Tweerigting Radio Gebruikershandleiding
Omvattende gebruikershandleiding vir die BAOFENG UV-17R-reeks tweerigtingradio, wat die werking, kenmerke, laai, installering van bykomstighede, probleemoplossing en tegniese spesifikasies vir optimale werkverrigting en betroubare kommunikasie dek.
Preview BAOFENG UV-5RM PLUS / K5PLUS Amateurradio Gebruikershandleiding
Verken die BAOFENG UV-5RM PLUS/K5PLUS Amateurradio Gebruikershandleiding, 'n omvattende gids vir hierdie dubbelband-, dubbelskerm-, dubbelhorlosie-sender-ontvanger. Leer meer oor die kenmerke, werking, batterylaai, bykomstigheidinstallasie en gevorderde funksies soos skandering, programmering, VOX en DTMF. Hierdie handleiding verskaf noodsaaklike veiligheidswaarskuwings, inligting oor regulatoriese voldoening (EU, FCC, IC) en probleemoplossingswenke vir optimale werkverrigting en veilige kommunikasie.
Preview Retevis RT1 User Manual: Features, Operation, and Specifications
Comprehensive user manual for the Retevis RT1 two-way radio, a powerful, long-range VHF high-class professional FM transceiver. Covers features, basic and advanced operations, programming, troubleshooting, and technical specifications.
Preview BaoFeng BF-UV5R Programmeringsgids
'n Omvattende gids vir die programmering van die BaoFeng BF-UV5R dubbelband-amateurradio met behulp van beide die vervaardiger se sagteware en CHIRP. Dek stelselvereistes, kabelopstelling, sagteware-installasie en gedetailleerde parameterverduidelikings vir radio-aanpassing.
Preview KD-UV5R Dubbelband Tweerigtingradio Gebruikershandleiding
Omvattende gebruikershandleiding vir die KD-UV5R amateur dubbelband walkie-talkie, wat kenmerke, werking, installasie, probleemoplossing en waarborginligting dek.
Preview TIDRADIO TD-H6 Programmeringsgids
A comprehensive guide to programming the TIDRADIO TD-H6 dual-band amateur radio using both manufacturer software and CHIRP software. Covers preparation, software installation, cable usage, troubleshooting, and detailed explanations of channel settings and optional features.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.