iGPSPORT M80 Out Front Bike Computer Mount User Manual

1. Inleiding

The iGPSPORT M80 Out Front Bike Computer Mount is a standard model designed to provide an optimal viewing angle for your bike computer, enhancing riding safety and convenience. Constructed from ultra-light and impact-resistant nylon-glass fiber composite material, this mount ensures stability for your bike computer even on challenging road surfaces. It also supports the installation of optional accessories such as sports cameras and bike headlights.

2. Pakketinhoud

• 1 x iGPSPORT M80 Out Front Bike Computer Mount
• 1 x Six Angle T25 wrench (for installation)
• (Optional accessories like sports cameras or bike headlights are not included)

3. Opstelling en installering

1. Prepare your Handlebar: Ensure your bicycle handlebar has a diameter of 31.8 mm for compatibility.
2. Posisioneer die montering: Place the M80 mount on your handlebar in the desired out-front position.
3. Bevestig die Clamp: Use the provided Six Angle T25 wrench to tighten the clamp screws securely around the handlebar. Ensure the mount is firm and does not rotate freely.
4. Attach Bike Computer: Align your compatible iGPSPORT or Garmin bike computer with the mount interface and twist to lock it into place.
5. Install Optional Accessories (if applicable): If you wish to attach a sports camera or bike headlight, use the designated attachment point on the underside of the mount.

4. Bedryfsinstruksies

The M80 mount is designed for straightforward use:

• Heg toestelle aan: Simply align your compatible iGPSPORT or Garmin device with the mount's interface and twist clockwise until it clicks securely into place.
• Removing Devices: To remove, twist the device counter-clockwise until it disengages from the mount.
• Gebruik van bykomstighede: If using a sports camera or bike headlight, ensure it is securely fastened to the accessory attachment point beneath the mount before riding.

5. Onderhoud

• Skoonmaak: Vee die berg met adamp cloth to remove dirt and grime. Avoid harsh chemicals that may damage the material.
• Inspeksie: Periodically check all screws and connections to ensure they are tight. Re-tighten with the Six Angle T25 wrench if necessary.
• Berging: Store the mount in a cool, dry place when not in use for extended periods.

6. Probleemoplossing

• Berging voel los: Ensure the handlebar clamp screws are tightened sufficiently with the provided T25 wrench.
• Toestel pas nie: Verify that your bike computer model is listed as compatible in the specifications section. Ensure the device is aligned correctly before twisting to lock.
• Accessory attachment issues: Confirm that your accessory (camera/light) is designed to fit the standard accessory mount point and is properly secured.

7. Spesifikasies

8. Gebruikerswenke

• Gaan versoenbaarheid na: Always double-check the compatibility list for your specific bike computer model before purchase and installation.
• Toebehore-integrasie: The mount is designed to support additional accessories like headlights and action cameras. Ensure any third-party accessories are compatible with the mount's attachment point.
• Veilige installasie: A firm installation is crucial for stability, especially on rough terrain. Use the provided T25 wrench to ensure all screws are adequately tightened.

9. Waarborg en Ondersteuning

For detailed warranty information and customer support, please refer to the official iGPSPORT website or contact your retailer. An electronic version of the user manual is also available for download:

Laai gebruikershandleiding af (PDF)

For any technical inquiries or assistance, please reach out to iGPSPORT customer service.