Modern Extendable Wooden Dining Table

Inleiding

Thank you for choosing the Modern Extendable Wooden Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Veiligheidsinligting

• Monteer die tafel altyd op 'n sagte, skoon oppervlak om skrape te voorkom.
• Maak seker dat alle skroewe en bevestigingsmiddels stewig vasgedraai is voor gebruik. Kontroleer gereeld en draai weer vas soos nodig.
• Moenie op die tafel staan ​​of sit nie.
• Do not exceed the recommended weight capacity of the table.
• Hou klein onderdele weg van kinders tydens montering om verstikkingsgevare te voorkom.
• Use caution when extending or retracting the table to avoid pinching fingers.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met montering begin. Indien enige onderdele ontbreek of beskadig is, kontak asseblief kliëntediens.

Spesifikasies

Figure 1: Dining Table Dimensions

Opstelling en samestelling

This dining table requires assembly. Please follow these general steps. Specific diagrams and hardware may vary slightly. It is recommended to have two people for assembly.

1. Pak komponente uit: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (e.g., a blanket or cardboard) to prevent damage. Identify all parts against the package contents list.
2. Assemble Bases: Attach any necessary support beams or crossbars to the double sturdy bases according to the included diagrams. Ensure all connections are firm.
3. Heg basisse aan tafelblad vas: Carefully place the tabletop upside down on your protected surface. Align the assembled bases with the pre-drilled holes on the underside of the tabletop. Secure the bases to the tabletop using the provided screws and bolts. Do not fully tighten until all connections are made.
4. Assemble Extension Mechanism (if separate): If the extension mechanism is not pre-assembled, follow the instructions to install it on the underside of the tabletop.
5. Insert Extension Leaf: If the table is designed with a removable leaf, ensure the runners are clear. Insert the extension leaf into the center of the table, aligning it with the main tabletop sections.
6. Finale stramming: Sodra al die komponente in plek is en in lyn is, draai alle skroewe en boute heeltemal vas.
7. Regop die tafel: With assistance, carefully flip the table upright.

Figure 2: Fully Assembled Dining Table

Bedryfsinstruksies

Verleng die tafel

1. Clear the tabletop of all items.
2. Locate the locking mechanisms (if any) underneath the table that secure the two halves of the tabletop. Unlock them.
3. Gently pull the two halves of the tabletop apart. The extension runners will slide, creating a gap in the center.
4. Carefully place the extension leaf into the gap, ensuring it sits flush and aligns with the main tabletop surface.
5. Push the two halves of the tabletop back together until they meet the extension leaf and are flush.
6. Re-engage the locking mechanisms underneath the table to secure the extended tabletop.

Figure 3: Table in Extended Position

Retracting the Table

1. Clear the tabletop of all items.
2. Unlock the locking mechanisms underneath the table.
3. Trek die twee helftes van die tafelblad versigtig uitmekaar om 'n gaping te skep.
4. Carefully lift and remove the extension leaf. Store it in a safe place to prevent damage.
5. Push the two halves of the tabletop back together until they meet and are flush.
6. Re-engage the locking mechanisms underneath the table to secure the compact tabletop.

Figure 4: Table in Compact Position

Onderhoud

• Skoonmaak: Vee die tafeloppervlak af met 'n sagte, damp cloth. Avoid harsh chemicals or abrasive cleaners that can damage the wood finish.
• Gemors: Clean spills immediately to prevent staining, especially on wooden surfaces.
• Hitte en vog: Use coasters and placemats to protect the tabletop from hot dishes, moisture, and scratches.
• Sonlig: Avoid prolonged exposure to direct sunlight, which can cause fading or warping of the wood.
• Periodieke ondersoeke: Regularly inspect all fasteners and connections. Tighten any loose screws or bolts to maintain stability.

Probleemoplossing

Table is Wobbly

• Maak seker dat alle monteerskroewe en -boute volledig vasgedraai is.
• Check that the table is on a level surface. Adjust furniture glides or place shims if necessary.

Extension Mechanism is Stiff or Stuck

• Ensure the locking mechanisms are fully disengaged.
• Check for any debris or obstructions in the extension runners. Clean if necessary.
• Apply a small amount of silicone-based lubricant to the runners if they are excessively stiff.

Tabletop Not Flush After Extension

• Ensure the extension leaf is correctly seated and fully inserted.
• Verify that the locking mechanisms are properly engaged to pull the sections together.

Gebruikerswenke

• For optimal stability, always extend or retract the table with two people.
• When not using the extension leaf, store it flat in a dry place to prevent warping.
• Consider adding felt pads to the bottom of the table bases to protect your flooring and make moving the table easier.

Waarborg en Ondersteuning

For any questions, concerns, or to report missing/damaged parts, please contact the seller or manufacturer directly. Please have your model number (W1347) and purchase information ready when contacting support.