Produk verbyview
The VIVOHOME Smart Bathroom Exhaust Fan is designed to provide efficient ventilation, intelligent climate control, and enhanced ambiance for your bathroom or other suitable rooms. It features an energy-saving EC motor, automatic humidity sensing, multi-color RGB lighting, adjustable CCT LED light, a built-in Bluetooth speaker, and convenient remote control.
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Elektriese waaierontwerp | Uitlaatwaaier |
| Kragbron | EC Motor (45W) |
| Soort kamer | Bathroom, Bedroom, Gaming Room, Home Cinema |
| Montage tipe | Plafon Mount |
| Lugvloei (CFM) | 30 / 110 / 160 CFM (Auto-switching based on humidity), Manual 6-speed control (up to 150 CFM) |
| Geraasvlak | 0.1 - 1.5 Sones |
| RGB lig | 7 Static Colors, Color-cycle Mode, Dynamic Mode, Breathing Mode, Music-sync Light Show |
| LED Light (CCT) | 2700K, 4000K, 5700K (6-level adjustable brightness, 1500LM max) |
| Naglig | 200LM, 2700K (Glare-free) |
| Spesiale kenmerke | Bluetooth Speaker, Humidity Sensor, Remote Controlled, Timer (0.5/1/1.5 H), Memory Function |
| Behuisingsmateriaal | Lightweight, rust-proof ABS and PP |
| Behuisingsafmetings | 8.9 × 8.9 × 5.7 duim |
| Paneelafmetings | 11.8 × 11.8 duim |
| Kanaal deursnee | 4 duim |
| Recommended Cutout | New Install: 10.2 × 10.2 inches; Replacement: Fits existing 10 - 10.4 inch cutouts |
| Pakketgrootte | 13.4 × 12.6 × 7.5 duim |
| Pakket gewig | 6.4 lb |
Opstelling en installasie
This section provides general guidelines for installing your VIVOHOME Smart Bathroom Exhaust Fan. It is recommended to consult a qualified electrician for wiring and installation to ensure safety and compliance with local building codes.
Voor installasie:
- Ensure the power supply to the installation area is turned OFF at the circuit breaker.
- Verify that the ceiling opening dimensions are compatible with the fan's housing and panel.
- Gather all necessary tools: screwdriver, wire strippers, drill, measuring tape, safety glasses, gloves.
- Unpack the fan and inspect for any damage.
Installasie stappe:
- Berei plafonopening voor: For new installations, create a 10.2 x 10.2 inch cutout in the ceiling. For replacements, ensure the existing cutout is between 10 and 10.4 inches.
- Mount Fan Housing: Secure the fan housing (8.9 × 8.9 × 5.7 inches) into the ceiling opening using appropriate fasteners. Ensure it is firmly attached to ceiling joists or blocking.
- Verbind Kanaal: Attach a 4-inch diameter duct to the fan's exhaust port. Ensure a tight seal to prevent air leakage.
- Elektriese bedrading: Connect the fan's electrical wires to your household wiring according to local electrical codes. Typically, this involves connecting live, neutral, and ground wires. Refer to the detailed wiring diagram in the included instructions.
- Install Face Panel: Once wiring is complete and tested, attach the 11.8 × 11.8 inch decorative face panel to the fan housing.
- Herstel krag: Turn the power supply back ON at the circuit breaker.
Let wel: Detailed instructions are included in the product packaging to ensure a quick and hassle-free setup. Please refer to these for specific wiring diagrams and safety information.
Bedryfsinstruksies
Your VIVOHOME Smart Bathroom Exhaust Fan can be controlled via the included smart remote control.
Fan beheer:
- Automatic Humidity Sensing: The fan will automatically switch between 3 speeds (30/110/160 CFM) based on detected humidity levels.
- Handmatige spoedbeheer: Use the 'Fan Speed +' and 'Fan Speed -' buttons on the remote to adjust the fan speed manually across 6 levels.
- AUTO-knoppie: Press the 'AUTO' button to activate or deactivate the automatic humidity sensing mode.
Light Control (3CCT & Night Light):
- Ligskakelaar: Use the dedicated light switch button to turn the main LED light ON/OFF.
- Helderheid aanpassing: Use 'Brightness +' and 'Brightness -' buttons to adjust the brightness across 6 levels.
- Kleurtemperatuur (CCT): Cycle through 2700K (Warm White), 4000K (Neutral White), and 5700K (Cool White) using the 'K' button.
- Naglig: Activate the 200LM, 2700K night light mode using the 'Night Light' button.
- Geheue funksie: The fan remembers your last preferred color temperature, brightness, and manual fan speed settings.
RGB-ligbeheer:
- RGB AAN/UIT: Short press to switch RGB modes, long press to turn RGB light OFF.
- Statiese kleure: Kies uit 7 statiese kleure.
- Color-Cycle Mode: Activates a continuous cycle through colors.
- Dinamiese modus: Provides a lively, changing light effect.
- Asemhalingsmodus: Creates a soft, pulsating light effect.
- Music-Sync RGB Light: Syncs the RGB lights to the beat of the music playing through the Bluetooth speaker.
Bluetooth-luidspreker:
- Bluetooth AAN/UIT: Use the dedicated Bluetooth button on the remote to turn the speaker ON/OFF.
- Saambinding: Once Bluetooth is ON, search for the fan's Bluetooth name on your device (e.g., smartphone, tablet) and pair.
- Musiek speel: Play audio from your paired device through the fan's speaker.
Timer funksie:
- Use the 'Timer' button to set the fan to turn off automatically after 30, 60, or 90 minutes.
Buzzer beheer:
- The remote allows you to turn off the buzzer sound for silent operation.
Onderhoud
Gereelde onderhoud verseker optimale werkverrigting en lang lewensduur van jou uitlaatwaaier.
Skoonmaak:
- Skakel af: Always turn off the power to the fan at the circuit breaker before cleaning.
- Remove Face Panel: Carefully detach the decorative face panel.
- Clean Fan Grille and Blades: Use a soft cloth or brush to remove dust and debris from the fan grille and blades. A mild detergent solution can be used for stubborn dirt, but ensure no liquid enters the motor housing.
- Clean Light Diffuser: Wipe the light diffuser with a soft, damp lap.
- Hermonteer: Once all parts are dry, reattach the face panel and restore power.
Algemene sorg:
- Do not use abrasive cleaners or solvents on any part of the fan.
- Ensure the fan's air intake and exhaust are not obstructed.
- Periodically check for any unusual noises or vibrations, which may indicate a need for professional inspection.
Probleemoplossing
If you encounter issues with your exhaust fan, refer to the following common problems and solutions:
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Waaier skakel nie aan nie | Geen kragtoevoer Los bedrading Afstandbeheer se battery laag | Kontroleer stroombreker en muurskakelaar Inspect wiring connections (consult electrician) Vervang afstandbeheerbattery |
| Fan is noisy or vibrates | Los montering Puin in waaierblaaie Motor kwessie | Maak seker dat die waaierbehuising stewig gemonteer is Clean fan blades and grille Contact support if motor issue suspected |
| Lig gaan nie aan nie | Geen kragtoevoer Los bedrading Light module issue | Gaan krag en bedrading na Kontak ondersteuning |
| Bluetooth-luidspreker verbind nie | Bluetooth off on fan or device Toestel te ver Already paired to another device | Ensure Bluetooth is enabled on both fan and device Move device closer to fan Disconnect from other devices and try again |
| Humidity sensor not working | Sensor versper Sensor wanfunksie | Ensure sensor area is clear Kontak ondersteuning |
| Afstandbeheer reageer nie | Battery low/dead Obstruksie tussen afstandbeheer en waaier | Vervang afstandbeheerbattery Ensure clear line of sight to fan |
For issues not listed here or if problems persist, please contact VIVOHOME customer support.
Gebruikerswenke
- For optimal humidity sensing, ensure the fan is installed in a location where it can accurately detect moisture levels, typically near the shower or bath.
- Experiment with the different RGB light modes and CCT settings to find the perfect ambiance for various activities, from relaxing baths to bright morning routines.
- Utilize the timer function to ensure the fan runs long enough to clear humidity after a shower without unnecessary continuous operation.
- Keep the remote control in a convenient, dry location within the bathroom for easy access to all features.
Waarborg en Ondersteuning
For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official VIVOHOME webwebwerf. Bewaar u aankoopbewys as bewys van aankoop vir enige waarborgeise.