1. Inleiding
The Twotrees TS1 Mini Laser Engraver is a compact and versatile device designed for personal and DIY engraving projects. It features a 3W laser, supports multiple connection methods (USB, Bluetooth), and is compatible with various materials like wood, paper, leather, and plastic. This manual provides essential information for safe and effective use of your TS1 engraver.
Figure 1: Twotrees TS1 Mini Laser Engraver and example toepassings.
2. Veiligheidsinligting
WARNING: Class IV Laser Product. Avoid direct exposure to eyes. Always wear laser goggles during operation.
To ensure safe operation of your Twotrees TS1 Mini Laser Engraver, please observe the following safety guidelines:
- Always wear the provided laser goggles when the laser is active.
- Do not open the protective cover during engraving operations. Be careful of laser damage.
- Hou die toestel weg van kinders en troeteldiere.
- Operate the engraver in a well-ventilated area to dissipate fumes and odors from engraving.
- Ensure the engraver is placed on a stable, non-flammable surface.
- Moet nooit die graveerder sonder toesig laat tydens werking nie.
- Do not engrave highly reflective, transparent, or unknown materials without proper precautions and testing.
Figure 2: Safety features including protective cover, goggles, and exhaust port.
3. Pakketinhoud
Verifieer dat alle items in jou pakket teenwoordig is:
- TS1 Mini Laser Engraver unit
- Acrylic laser protective cover
- Laserbril
- USB kabel
- Kragadapter
- Skroewedraaier
- Test materials (e.g., wood, black plastic sheets)
- Gebruikershandleiding (fisiese kopie)
Figuur 3: Ingesluite bykomstighede en komponente.
4. Opstelgids
- Uitpak: Verwyder alle komponente versigtig uit die verpakking.
- Plasing: Place the engraver on a stable, level, and non-flammable surface in a well-ventilated area.
- Kragverbinding: Connect the power adapter to the engraver's power input, then plug it into a suitable electrical outlet.
- Computer/Mobile Connection:
- USB-verbinding: Koppel die graveur aan jou rekenaar met behulp van die meegeleverde USB-kabel.
- Bluetooth-verbinding: Enable Bluetooth on your mobile device and pair it with the TS1 engraver.
- Vanlyn werking: The device supports offline operation once engraving files word opgelaai.
- Sagteware installasie: Install compatible software such as LightBurn or LaserGRBL for PC, or the MKSLaser mobile application.
- Fokus verstelling: The laser head is adjustable for optimal focusing distance (2.5-6.5 cm). Rotate the laser head to achieve the sharpest, smallest laser dot on your material. This ensures precise engraving.
Figure 4: Multiple connection options for the TS1 engraver.
Figure 5: Adjustable laser focus mechanism and precision details.
Video 1: TS1 Mini Laser Engraver Setup and Engraving Demonstration.
5. Bedryfsinstruksies
- Materiaal voorbereiding: Place the material to be engraved within the engraving area (80x80mm). The machine cavity can support objects up to 30mm in height. Ensure the material is stable and flat.
- Dra veiligheidsbril: Always wear the provided laser goggles before starting any engraving task.
- Sagteware-koppelvlak:
- Open your chosen software (LightBurn, LaserGRBL, or MKSLaser app).
- Import your design. Supported formats include JPG, PNG, BMP, G-code, Gif, SVG, NC, GC.
- Pas graveerparameters aan:
- Work Speed: Set the engraving speed (e.g., 800 mm/min).
- Laser krag: Adjust the laser intensity (e.g., 230, range 0-1000).
- Grootte: Define the dimensions of your engraving.
- Style Setting: Utilize options like 'Gray', 'Strong', 'Sketch' to adjust brightness, contrast, and other image processing settings for optimal results.
- Preview and Position: Use the software to preview the engraving path and adjust the material's position if necessary to ensure accurate placement.
- Begin graveer: Once all parameters are set and the material is correctly positioned, initiate the engraving process from the software.
- Monitering: Continuously monitor the engraving process. Do not open the protective cover during operation.
- Voltooiing: After engraving is complete, safely remove the engraved item.
Figure 6: Mobile application interface for controlling the TS1 engraver.
6. Onderhoud
- Skoonmaak van die laserlens: Regularly clean the laser lens with a soft, lint-free cloth. Ensure the device is powered off and unplugged before cleaning.
- Cleaning the Engraving Area: Keep the engraving area free from dust and debris. Use a soft brush or compressed air to remove any residue.
- Uitlaatpoort: Ensure the exhaust port is clear to maintain proper ventilation and prevent smoke buildup.
- Berging: When not in use, store the engraver in a dry, dust-free environment.
7. Probleemoplossing
- Geen laseruitset:
- Check if the power adapter is securely connected and the device is powered on.
- Verify that the USB or Bluetooth connection is active and stable.
- Ensure the laser power setting in your software is not set to zero.
- Confirm that the protective cover is properly closed, as some models have safety interlocks.
- Swak Gravure Kwaliteit:
- Fokus: Adjust the laser focus by rotating the laser head until the laser dot on the material is as small and sharp as possible.
- Instellings: Experiment with different laser power and speed settings for your specific material. Refer to online resources or material guides for recommended parameters.
- Materiaal: Ensure the material is flat and securely placed to prevent movement during engraving.
- Verbindingskwessies:
- USB: Try a different USB port or cable. Reinstall the device drivers if necessary.
- Bluetooth: Ensure Bluetooth is enabled on both your device and the engraver. Try unpairing and re-pairing the devices.
- Software Not Responding:
- Restart the engraving software and the TS1 engraver.
- Check for any available software updates.
8. Spesifikasies
| Kenmerk | Detail |
|---|---|
| Produk Naam | TS1 Mini Laser Engraving Machine |
| Main Body Color | Silwer grys |
| Materiaal van die hoofliggaam | Injection molding + aluminum |
| Produkafmetings (L x B x H) | 157 mm x 157 mm x 167 mm (6.22 duim x 6.22 duim x 6.69 duim) |
| Graveerarea | 80mm x 80mm x 35mm (machine cavity supports objects 0-30mm high) |
| Laser krag | 3W |
| Optimal Focusing Distance | 2.5-6.5 cm (adjustable laser head) |
| Compatible Engraving Materials | Plywood, density board, solid wood board, paper, painted metal, kraft paper, leather, plastic, bamboo |
| Produk Netto Gewig | Approx. 1025.7g (±100g) |
| Verpakking Grootte | 203 mm x 210 mm x 196 mm |
| Kragtoevoer | 12V/2A |
| Werkende kragverbruik | 17.5 W |
| Bluetooth | Ondersteun |
| TF berging | Supported (built-in) |
| USB-poort | Ondersteun |
| Gravure akkuraatheid | 0.1 mm |
| Maksimum Graveerspoed | 3000 mm/min |
| Maksimum versnelling | 320 mm/min |
| Versoenbare sagteware | LightBurn, LaserGRBL, MKSLaser (mobile phone APP) |
| Beheerder | GRBL |
| Slim toestel | Ja |
| Sertifisering | CE |
| CNC of nie | CNC |
Figure 7: Product dimensions and engraving area.
9. Gebruikerswenke
- Engraving LEGO Bricks: When engraving LEGO bricks, be aware that light-colored bricks may darken at the laser-engraved areas. For black bricks, the engraving effect may vary depending on the plastic's composition and laser settings. It is highly recommended to perform a test engraving on a spare or inconspicuous part of the LEGO brick using low power settings first to achieve desired results and avoid damage.
- Materiaaltoetsing: Always perform small test engravings on new materials or when using new settings to determine the optimal laser power and speed.
- Ventilasie: Even with the built-in fan, ensure good room ventilation, especially when engraving materials that produce strong fumes.
10. Waarborg en Ondersteuning
For warranty information, technical support, and service inquiries, please refer to the official TWO TREES website or contact your authorized retailer. Please retain your purchase receipt as proof of purchase for any warranty claims.
