Yolin YL81C E-fiets LCD-skerm Gebruikershandleiding

1. Important Information & Compatibility

This manual provides instructions for the Yolin YL81C LCD Display, designed for e-bikes. Please read carefully before installation and use.

Belangrike Verenigbaarheidsnota:

The YL81C color LCD display uses specific communication protocols. Different e-bike brands may use different LCD Display protocols. Before purchasing or installing, it is crucial to verify that the YL81C display's protocol is compatible with your e-bike's controller. Failure to do so may result in the display not functioning correctly with your e-bike. Please consult your e-bike manufacturer's specifications or contact customer service for compatibility verification.

2. Produk verbyview

2.1. Kenmerke

• Batteryvlak-aanwyser
• Auxiliary (PAS) level adjustment and indication
• Koplig aanwyser
• Speed indicator (real-time speed, maximum speed (MAXS), and average speed (AVG))
• Distance indicator (Odometer (ODO) and trip distance (TRIP))
• Foutkode-aanwyser
• Parameter instelling funksie

2.2. Kontroles

The YL81C display features intuitive buttons for easy operation:

• Aan/uit-knoppie (bo):
  - Hold for 2 seconds to switch the display on or off.
  - Press briefly for menu transition.
• '+' Button (Bottom Left):
  - Hold for 2 seconds to switch the e-bike's light on or off.
  - Press briefly to increase values or assist level.
• '-' Button (Bottom Right):
  - Press briefly to decrease values or assist level.

2.3. Vertoon elemente

The LCD screen provides comprehensive information about your ride:

• Batteryvlak-aanwyser: Shows the current charge of your e-bike battery.
• Spoedaanwyser: Displays your current riding speed.
• Assist Level Indicator (PAS): Shows the current pedal assist level (e.g., 0-3, 1-5).
• Maksimum spoed (MAKS): Records the highest speed achieved during the current trip.
• Trip Distance Indicator (TRIP): Shows the distance covered in the current trip.
• Kilometerteller (ODO): Wys die totale opgehoopte afstand.
• Koplig aanwyser: Illuminates when the e-bike's headlight is active.
• Spoed Eenheid: Indicates whether speed is displayed in km/h (Metric) or MPH (Imperial).
• Distance/Speed Unit: Specifies the units used for distance (km or mile) and speed (km/h or MPH).
• Average Speed Indicator (AVG): Shows the average speed for the current trip.

3. Opstelling en installering

Follow these steps to properly install your YL81C display:

1. Montering: Securely attach the display to your e-bike's handlebar. The display is designed for a handlebar size of Φ22.2mm. Ensure it is positioned for optimal visibility and accessibility of controls.
2. Bedrading: Connect the display to your e-bike's controller using the provided 5-hole female connector. Waterproof wires are recommended for durability and protection against elements. Ensure the connection is firm and secure.

Let wel:

Always ensure the e-bike's power is off before connecting or disconnecting the display to prevent damage to electrical components.

4. Operasie

Operating your YL81C display is straightforward:

1. Krag aan/af: Hold the top power button for 2 seconds.
2. Kieslysnavigasie: Briefly press the top power button to cycle through different display menus or information screens.
3. Adjusting Assist Level: Use the '+' and '-' buttons to increase or decrease the pedal assist level (PAS). The available PAS levels are typically 0-3, 1-3, 0-5, or 1-5, depending on your e-bike's configuration.
4. Kopligbeheer: Hold the '+' button for 2 seconds to turn the e-bike's headlight on or off.
5. Parameterinstellings: The display supports parameter setting functions. Refer to your e-bike's main controller manual or contact customer service for detailed instructions on accessing and modifying these settings, as they can vary.

5. Onderhoud

• Skoonmaak: Gebruik 'n sagte, damp lap om die skerm skoon te maak. Vermy skuurmiddels of oplosmiddels wat die skerm of ... kan beskadig.asing.
• Waterweerstand: The display is rated IP65 waterproof, meaning it is protected against dust and low-pressure water jets. While it can withstand splashes and light rain, avoid submerging it in water or exposing it to high-pressure water.
• Temperatuur: Operate the display within the specified operating temperature range of -20°C to 60°C. Store it within -30°C to 70°C. Extreme temperatures can affect performance and lifespan.
• Verbindings: Kontroleer alle verbindings gereeld om te verseker dat hulle stewig en vry van korrosie is.

6. Probleemoplossing

• Skerm skakel nie aan nie: Check the power connection to the e-bike controller. Ensure the e-bike battery is charged and powered on.
• Geen data vertoon nie: Verify all connections are secure. Ensure the display's communication protocol matches your e-bike controller.
• Foutkodes: The display features an error code indicator. If an error code appears, consult your e-bike's controller manual or contact customer service with the specific code for diagnosis.
• Vervangingsonderdele: If you need to replace the display, locate the serial number or identification information on the back of the unit. Provide this information to customer service for accurate replacement part identification.

7. Spesifikasies

8. Gebruikerswenke

• Verifieer verenigbaarheid: Always double-check the display's communication protocol against your e-bike's controller before purchase or installation. This is the most common reason for incompatibility.
• Voltage Wedstryd: Ensure your e-bike's battery voltage (36V or 48V) matches the display's specifications for proper function.
• Veilige verbindings: Loose connections can lead to intermittent functionality or errors. Periodically inspect all wiring.
• Handlebar Size: The display is designed for a 22.2mm handlebar diameter. Ensure your handlebar matches this specification for a secure fit.

9. Waarborg en Ondersteuning

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt and any product identification numbers handy when seeking support.