Inleiding
This Ebike LCD Display (Model S966) is a colorful control panel designed for electric bicycles operating on 24-72V systems. It provides essential riding data such as speed, time, power, and temperature, along with a real-time reflection of battery charge and power consumption to help manage riding mileage. It features clearly set up individual joints for straightforward installation and is compatible with No. 2 Protocol Controllers.
Figure 1: Ebike LCD Display S966 Interface
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Model | LCD-S966 |
| Tik | Ebike LCD Display |
| Materiaal | ABS |
| Kleur | Swart |
| Gewig | Ongeveer. 190g |
| Connector Tipe | 5-pen |
| Voltage Versoenbaarheid | 24-72V |
| Beheerderversoenbaarheid | No. 2 Protocol Controller |
| Display Dimensions (L x H) | Ongeveer. 100 mm x 61.5 mm |
| Stuur Clamp Deursnee | Ongeveer. 22.2 mm |
| Kabellengte | Ongeveer 1690 mm (66.53 duim) |
Figure 2: Display Dimensions
Figure 3: Cable Length (5-pin version)
Opstelling en installasie
- Monteer die skerm: Securely attach the display unit to your ebike's handlebar using the integrated clamps. Ensure it is positioned for optimal visibility and does not obstruct other controls.
- Connecting the Control Buttons: Connect the separate control button unit to the display.
- Wiring to Controller: Connect the 5-pin main cable from the display to your ebike's controller. This display requires a controller that supports the No. 2 Protocol. Ensure the connection is firm and correctly aligned to prevent damage.
Figure 4: Display Mounting
Figuur 5: Besonderhede van die 5-pen-konnektor
Important: This display is designed to work exclusively with controllers using the No. 2 Protocol. Incompatibility will result in the display not functioning.
Bedryfsinstruksies
Once properly installed and connected, the LCD-S966 display will power on with your ebike system. The colorful screen provides clear, real-time data.
Vertoon inligting:
- Spoed: Huidige ryspoed (km/h of mph).
- Batterylading: Real-time battery level indicator.
- Foutkodes: Displays system errors if detected.
- Gear/PAS Level: Current Pedal Assist System (PAS) level.
- ODO/TRIP: Odometer (total distance) and Trip distance.
- AVG/MAX: Average and Maximum speed.
- Power/Temperature: Real-time power consumption and temperature.
- Ry Tyd: Duration of the current ride.
- Modus-aanwysers: SPORT, STD (Standard), ECO modes.
Beheerknoppies:
The separate control unit typically features three buttons:
- Opwaartse Pyltjie (↑): Increases PAS level, navigates menus upwards.
- Pyltjie af (↓): Decreases PAS level, navigates menus downwards.
- M (Mode/Power): Powers the display on/off (long press), cycles through display modes/information, confirms selections.
Figure 6: Display and Control Buttons
Onderhoud
- Skoonmaak: Wipe the display screen and unit with a soft, damp lap. Vermy die gebruik van skuurmiddels of oplosmiddels wat die skerm of c kan beskadig.asing.
- Verbindingskontrole: Kontroleer gereeld alle kabelverbindings om te verseker dat hulle stewig en vry van korrosie of skade is.
- Omgewingsbeskerming: While the display is designed for outdoor use, prolonged exposure to extreme weather conditions (heavy rain, direct intense sunlight) should be minimized to extend its lifespan.
Probleemoplossing
- Skerm skakel nie aan nie:
- Ensure the ebike battery is charged and powered on.
- Check all cable connections, especially the 5-pin connector to the controller, for looseness or damage.
- Verify that your ebike controller is compatible with the No. 2 Protocol. This is a common reason for non-functionality.
- Verkeerde data-aanwysing:
- Check the speed sensor connection on your ebike.
- Ensure the display settings (e.g., wheel size) are correctly configured (if applicable, though specific settings are not detailed in provided info).
- Error Message on Screen:
- Refer to your ebike's controller manual for specific error code interpretations. The display shows generic "ERROR" but the controller might provide more detail.
- Common errors relate to motor, battery, or sensor issues.
Gebruikerswenke
Geen spesifieke gebruikerswenke van re nieviews or Q&A were available for this product. General tips for ebike displays include:
- Always ensure the display is securely mounted before riding to prevent damage from vibrations or impacts.
- Familiarize yourself with the button functions before your first ride to safely adjust settings and view data on the go.
- Keep the screen clean for optimal readability, especially in varying light conditions.
Waarborg en Ondersteuning
Vir waarborginligting en tegniese ondersteuning, verwys asseblief na die verkoper se beleide of kontak die aankooppunt. Bewaar u aankoopbewys as bewys van aankoop.
