Lemorele Wireless HDMI Transmitter & Receiver Extender

1. Inleiding

Dankie vir die aankoopasing the Lemorele Wireless HDMI Transmitter & Receiver Extender. This device allows for seamless, high-definition wireless transmission of video and audio signals from your laptop, smartphone, or tablet to a TV, monitor, or projector. It supports 1080P resolution, 5G high-speed transmission, and features both HDMI and VGA dual ports, making it ideal for conference rooms, home theaters, multimedia education, and live streaming.

Figure 1: Lemorele Wireless HDMI Extender highlighting 5G Wireless, Full 1080P, HDMI & VGA, 50 Meters transmission.

2. Pakketinhoud

Merk asseblief die blokkie vir die volgende items:

• 1 x Draadlose HDMI-sender (TX)
• 1 x Draadlose HDMI-ontvanger (RX)
• 1 x Gebruikershandleiding
• 1 x HDMI-kabel (25 cm)
• 2 x Type-C Data Cables
• 1 x kragadapter
• 2 x Eksterne Antennas

Figuur 2: Alle komponente ingesluit in die produkpakket.

3. Produk verbyview

Familiarize yourself with the ports and indicators on your transmitter and receiver:

Figuur 3: Gedetailleerd view of the Receiver (RX) and Transmitter (TX) ports and features.

Receiver (RX) Ports:

• 1. Oudio-uitvoerpoort
• 2. Tipe-C Kragpoort
• 3. HDMI-uitsetpoort
• 4. VGA Output Port
• 5. Mesh Vent
• 6. Signal Projection Switch

Transmitter (TX) Ports:

• 1. Signal Projection Switch
• 2. Kragaanwyserlig
• 3. Tipe-C Kragpoort
• 4. Thermo Vent
• 5. HDMI-uitsetpoort

Note: The Transmitter (TX) cannot be used independently and must be paired with the Receiver (RX) for operation.

Figure 4: Close-up of the Transmitter (TX) unit, emphasizing its HDMI port and the requirement for pairing with an RX unit.

4. Setup Instructions (Plug & Play)

The Lemorele Wireless HDMI Extender is designed for easy plug-and-play setup without the need for additional drivers or apps.

1. Connect the Receiver (RX): Connect the receiver's HDMI or VGA port to a display device such as a TV, monitor, or projector.
2. Connect the Transmitter (TX): Connect the transmitter to your computer or other video output device.
3. Power the Devices: Ensure both the TX and RX units are adequately powered. If the transmitter's indicator light is flashing, its voltage is insufficient. Use the supplied power supply cable to power the transmitter (Power supply voltage: 5V2A).
4. Begin saambinding: Press and hold the function key of the transmitter (TX) for more than 3 seconds. The indicator light of the transmitter will flash rapidly, entering pairing mode.
5. Bevestig verbinding: Wait for the transmitter's indicator light to become solid. A solid light indicates a successful connection and mirroring is active.

Figure 5: Visual guide for connecting the RX to a display and the TX to a source device, followed by the pairing process.

Figure 6: Illustration of powering the transmitter (TX) from both a laptop and a wall adapter, with a crucial note about using a 5V2A power supply if the indicator light flashes.

5. Bedryfswyses

5.1 Mirror and Extend Mode

The wireless transmission supports both mirroring and extending your display. You can wirelessly stream 1080P content from your laptop to a single or dual monitor setup. This flexibility is beneficial for presentations, multitasking, or simply enjoying content on a larger screen.

• Spieëlmodus: Duplicates your source device's screen onto the connected display.
• Verleng modus: Expands your desktop workspace across the source device and the connected display.

Note: Mobile phones and tablets typically use mirroring mode, utilizing only the receiver for display.

Figure 7: Visual representation of how the device supports both Mirror and Extend display modes for enhanced productivity and viewing.

5.2 Multi-Point Free Switching

This kit supports connecting up to 8 transmitters to a single receiver, allowing for easy switching between multiple source devices. This feature is particularly useful in collaborative environments like conference rooms or classrooms.

Figure 8: Illustration of the Multi-Point Free Switching capability, showing multiple users seamlessly sharing their screens to a single display.

6. Probleemoplossing

• Geen sein/swart skerm:
  • Ensure both the transmitter (TX) and receiver (RX) are properly connected and powered on.
  • Verify that the display device is set to the correct HDMI or VGA input source.
  • Check if the transmitter's indicator light is solid. If it's blinking, the power supply might be insufficient. Use the provided 5V2A power adapter.
• Paar mislukking:
  • Ensure the TX and RX units are within the effective transmission range (up to 50 meters).
  • If pairing consistently fails, try resetting the receiver to factory settings by pressing and holding the receiver's function button for 10 seconds. Then, attempt the pairing process again.
• Intermittent Connection/Lag:
  • Ensure there are no significant obstructions (thick walls, metal objects) between the transmitter and receiver.
  • Minimize interference from other 5GHz Wi-Fi devices.
  • Check the power supply for both units to ensure stable operation.
• Geen oudio nie:
  • Verify that the audio output settings on your source device are correctly configured.
  • If using the RX's audio output port, ensure external speakers or headphones are properly connected.

7. Spesifikasies

8. Gebruikerswenke

• Ensure Adequate Power: If your transmitter's indicator light is blinking, it signifies insufficient power. Always use the supplied 5V2A power adapter to ensure stable operation and prevent connection issues.
• Mobile Device Mirroring: When using mobile phones or tablets, the device will operate in mirroring mode, and only the receiver unit is typically needed for the display connection.
• Optimale plasing: For the best transmission quality and range, try to place the transmitter and receiver with a clear line of sight, minimizing physical obstructions.
• Verenigbaarheid: The device is compatible with a wide range of applications and services for streaming and presentations.

Figure 9: The device supports a wide range of applications including Hulu, Netflix, Amazon, YouTube, Zoom, and Office.

9. Onderhoud

• Skoonmaak: Gebruik 'n sagte, droë lap om die toestel skoon te maak. Moenie vloeibare skoonmaakmiddels of aërosolsproei gebruik nie.
• Berging: Bêre die toestel op 'n koel, droë plek weg van direkte sonlig en uiterste temperature.
• Hantering: Vermy om die toestel te laat val of aan sterk impakte te onderwerp.
• Ventilasie: Ensure the mesh vents on the receiver and thermo vents on the transmitter are not blocked to prevent overheating.

10. Waarborg en ondersteuning

For technical support, warranty information, or any inquiries regarding your Lemorele product, please contact us:

• E-pos: support@lemorele.com

'n Gedetailleerde gebruikershandleiding in PDF-formaat is ook beskikbaar vir aflaai:

• Laai gebruikershandleiding af (PDF)