1Mii ML100 Bluetooth 5.0 Audio Receiver User Manual

Inleiding

The 1Mii ML100 Bluetooth 5.0 Audio Receiver is designed to bring wireless convenience to your audio experience. This compact and powerful device allows you to stream audio wirelessly from your Bluetooth-enabled devices to non-Bluetooth audio systems, such as car stereos, home audio systems, and wired headphones. With its advanced Bluetooth 5.0 technology, built-in microphone for hands-free calls, and long battery life, the ML100 enhances your listening and communication on the go.

Pakketinhoud

• 1 x 1Mii ML100 Bluetooth Receiver
• 1 x USB-laaikabel
• 1 x 3.5 mm oudiokabel
• 1 x 3.5mm Metal Adapter
• 1 x Gebruikershandleiding

Image: All items included in the 1Mii ML100 package.

Produk verbyview en kontroles

Image: Detailed diagram of the ML100 device with labeled components.

Sleutelkomponente:

• 3.5 mm oudio-aansluiting: For connecting to non-Bluetooth audio devices.
• Play/Pause/Bluetooth Pairing Button: Multi-function button for media control and pairing.
• LED-aanwyser: Provides status feedback (pairing, connected, charging).
• Volume + / Previous Button: Adjust volume up, or skip to previous track.
• Volume - / Next Button: Adjust volume down, or skip to next track.
• Krag aan/af skakelaar: Om die toestel aan of af te skakel.
• Laaipoort: USB Tipe-C-poort vir laai.
• mic: Ingeboude mikrofoon vir handvrye oproepe.

Opstelling en werking

1. Laai die toestel

Before first use, fully charge the ML100. Connect the provided USB charging cable to the charging port on the device and a USB power source (e.g., computer, USB wall adapter). The LED indicator will show charging status. A full charge takes approximately 1.5 hours and provides up to 14 hours of playback.

2. Skakel aan/af

• Krag aan: Slide the Power On/Off switch to the "ON" position. The LED indicator will light up.
• Skakel af: Slide the Power On/Off switch to the "OFF" position. The LED indicator will turn off.

3. Koppel met 'n Bluetooth-toestel

1. Ensure the ML100 is powered on.
2. The device will automatically enter pairing mode (LED indicator will flash). If not, press and hold the Play/Pause/Bluetooth Pairing button for 2 seconds to enter pairing mode.
3. On your Bluetooth-enabled device (smartphone, tablet, etc.), go to Bluetooth settings and search for "ML100".
4. Select "ML100" to connect. The LED indicator will turn solid blue once successfully paired.

Image: Visual guide for powering on, plugging in, pairing, and playing music.

4. Connecting to Audio Equipment

Use the provided 3.5mm audio cable or metal adapter to connect the ML100 to your desired audio system (car AUX port, home stereo, wired headphones, etc.).

Beeld: Bvamples of connecting the ML100 to various non-Bluetooth devices.

Image: Comprehensive compatibility diagram for the ML100.

5. Dual Connection

The ML100 supports connecting to two Bluetooth devices simultaneously. After pairing the first device, put the ML100 back into pairing mode and connect the second device. This allows for easy switching between audio sources and managing calls from either device.

Image: Dual connection feature of the ML100.

6. Using the Receiver (Control Table)

Spesifikasies

Probleemoplossing

• Toestel word nie aangeskakel nie: Ensure the battery is charged. Connect to a power source using the USB charging cable.
• Kan nie met Bluetooth-toestel koppel nie:
  1. Ensure the ML100 is in pairing mode (LED flashing).
  2. Make sure Bluetooth is enabled on your source device and it's within range.
  3. Try clearing the pairing list on the ML100 by pressing and holding both Volume + and Volume - buttons for 5 seconds.
  4. Restart both the ML100 and your source device.
• Geen oudio-uitvoer nie:
  1. Check if the ML100 is successfully paired and connected to your audio system via the 3.5mm jack.
  2. Ensure the volume on both the ML100 and your audio system is turned up.
  3. Verify that the correct input source is selected on your audio system.
• Poor audio quality or disconnections:
  1. Ensure there are no obstructions between the ML100 and your Bluetooth source device.
  2. Move closer to the source device to reduce interference.
  3. Kontroleer vir ander draadlose toestelle wat moontlik steuring veroorsaak.
  4. Ensure the ML100 is fully charged.
• Does not support LDAC codec: The 1Mii ML100 supports AAC but does not support Apt-x or LDAC codecs. If your source device uses these codecs, it will default to a supported codec like SBC or AAC.

Onderhoud

• Keep the device dry; do not expose it to moisture or extreme temperatures.
• Maak die toestel skoon met 'n sagte, droë lap. Moenie harde chemikalieë of skuurmiddels gebruik nie.
• Bêre die toestel op 'n koel, droë plek wanneer dit nie vir lang tye gebruik word nie.
• Vermy om die toestel te laat val of aan sterk impakte te onderwerp.

Gebruikerswenke

• For optimal sound quality, ensure your audio source device is also using a high-quality audio output.
• When using in a car, consider plugging the ML100 into a USB car charger for continuous power, especially on long drives, as it can be used while charging.
• Utilize the dual connection feature to seamlessly switch between your phone for calls and a tablet for music during travel.
• If experiencing any lag or connection issues, try resetting the device by clearing the pairing list and re-pairing.

Waarborg en Ondersteuning

This product comes with a 1-year warranty from the date of purchase. For any technical support or warranty claims, please contact the 1Mii Official Store directly. Please retain your proof of purchase for warranty validation.