ADQ Volta Elektroniese Kodeslot Instruksiehandleiding

ADQ Volta Electronic Code Lock

Spesifikasies

• Handelsmerk Locinox
• Produk Volta
• Model: LNKQ30C1LVCADRSILV
• Gradering 
  • U = 4.5 VDC
  • I = 5mA
• Vervaardiger: Ariel Door Gears Ltd.
• Afmetings:
  • Single -C1L: 224mm x 60mm (8-13/16″ x 2-3/8″)
  • Double -C2L: 226mm x 60mm (8-7/8″ x 2-3/8″)
• Max. Handle Length: 400 mm (15-3/4 duim)
• Heks grootte: 6 mm en 3 mm

Produkgebruiksinstruksies

Produkbeskrywing
The VOLTA door gear system by Ariel Door Gears Ltd. is designed for both single and double door configurations.

Programmering
The programming instructions for the VOLTA system can be found in the user manual provided with the product. Follow the steps carefully to set up the system according to your preferences.

Factory Reset Upon Loss of Master Pin
If you lose the master pin, refer to the user manual for instructions on how to perform a factory reset to regain access to the system.

Functioning of VOLTA
The VOLTA system operates smoothly to facilitate the opening and closing of doors. Ensure all components are installed correctly for optimal performance.

Onderhoud
Regular maintenance is essential to ensure the VOLTA system functions properly. Clean and lubricate moving parts as recommended in the user manual.

Algemene inligting
For any general queries or additional information about the VOLTA system, refer to the manufacturer’s webwebwerf of kontak hul kliëntediens.

Waarborg
Check the warranty details provided by Ariel Door Gears Ltd. to understand the coverage and duration of the warranty for the VOLTA system.

Ariel Deurratte Bpk.
Unit 1A, Dunboyne Business Park,  Dunboyne, Co. Meath, A86 W310

Kontak:

• Foon: + 353 1 8333168
• E-pos: info@adg.ie
• Webwebwerf: www.adg.ie

MONTAGE-INSTRUKSIES

Congratulations on the purchase of your Volta

PRODUKBESKRYWING

• Volta is a high-quality battery-operated electronic code lock with an aluminium housing. Volta’s energy-efficient design makes it very easy to add access control to any gate with a minimal need for maintenance.
• Volta is equipped with a weather-protected illuminated electronic code panel on one or two sides of the gate. Using these code panels, PIN codes can be easily added, modified or removed. Up to 100 codes can be programmed. Different codes can be used for entry and exit, and the system also supports permanently open codes.

PROGRAMMERING

TOEGANG PROGRAMMERINGSMODUS

• Volta offers 2 alternative methods to enter the programming menu: by using the Master PIN code (default value ‘12345’), or by using the key contact:
• Druk [#] vir 5 sekondes, [#] sal begin flikker
• Either enter the Master PIN code and press [#], or turn and hold the key contact in the locking direction for a seconds

• If a wrong Master PIN is entered, the programming mode ends, and the time-out procedure as described in 4.2 applies

WAARSKUWINGS.

• For safety reasons, we strongly recommend changing the Master PIN upon first use
• If only [#] is lit, you are in the main menu of the programming mode

Kies 'n kieslys en bevestig met [#]. Die volgende spyskaarte is beskikbaar:

• [9] ▶setup Master PIN – 2.2
• [1] ▶manage PIN codes – 2.3
• [2] ▶manage permanently open codes – 2.4
• [3] ▶setup switching duration – 2.5
• [4] ▶setup free exit mode – 2.6
• [5] ▶setup lighting mode – 2.7
• [0]▶factory reset – 2.8
• See the next paragraphs for detailed information

The programming mode ends automatically when there is no activity for 60 seconds

• Nadat u 'n kieslys gekies het, is dit moontlik om terug te keer na die hoofkieslys deur die [C]-sleutel te druk
• Druk [C] vir 5 sekondes om die programmeringsmodus te verlaat

OPSTEL MEESTER PIN [9]

• Toegang tot programmeringsmodus (sien 2.1)
  • Druk [#] vir 5 sekondes, [#] sal begin flikker
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Druk [9] en bevestig met [#]
• [9] en [#] is albei verlig
• Die verstek Meester-PIN is 12345. Dit moet altyd 'n 5-syfer-kode wees
• Voer 'n nuwe 5-syfer hoof-PIN in en druk [#]
• Repeat the previous step to confirm the new Master PIN
• If both codes are equal, all LEDs will light briefly, and you will return to the main menu of the programming mode

BESTUUR PIN-KODES [1]

• Toegang tot programmeringsmodus (sien 2.1)
  • Druk [#] vir 5 sekondes, [#] sal begin flikker
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated

A maximum of 100 different PIN codes can be programmed

• Druk [1] en bevestig met [#]
• [1] en [#] is albei verlig
• Enter a new PIN code (4-8 digits) and confirm with [#]
• In die geval van 'n nuwe kode, sal die kode herhaal en bevestig moet word met [#]
• The lights of buttons [5] and/or [7] indicate on which side of the lock the code is valid. [7] is used for the side the user is currently using, while [5] is used for the other side. The Volta model with a keypad on one side shows only  option [7]
• Pressing [5] and/or [7] will deselect (flashing) or select (permanently on) the corresponding side
• Druk [#] om te bevestig
• You will return to the main menu of the programming mode;[#] will remain lit. Press [C] for 5 seconds to exit the programming mode

When two different codes or a wrong code length is entered, all LEDs flash two times, indicating the code setting hasn’t been saved. Try again. [1] will remain lit

A code can be removed by deselecting [5] and/or [7] before confirmation

BESTUUR PERMANENT OOP KODES [2]
PIN codes generated using menu [1] (manage PIN codes) will unlock the lock for a predefined duration, as configured in menu [3] (‘setup switching duration’). In contrast, a ‘permanently open’ code has no predefined duration to remain open, but will remain open until the same code (or another permanently open code) is entered.

• Toegang tot programmeringsmodus (sien 2.1)
  • Druk [#] vir 5 sekondes, [#] sal begin flikker
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Druk [2] en bevestig met [#]
• [2] en [#] is albei verlig
• Voer 'n nuwe PIN-kode in en bevestig met [#]
• In die geval van 'n nuwe kode, sal die kode herhaal en bevestig moet word met [#]
• The lights of buttons [5] and/or [7] indicate which side of the lock the code is valid. [7] is used for the side the user is currently using, while [5] is used for the other side. The Volta model with a keypad on one side shows only option [7]
• Pressing [5] and/or [7] will deselect (flashing) or select (permanently on) the corresponding side
• Druk [#] om te bevestig
• Jy sal terugkeer na die hoofkieslys van die programmeringsmodus

When two different codes or a wrong code length is entered, all LEDs flash two times, indicating the code setting hasn’t been saved. Try again. [2] will remain lit

A code can be removed by ddeselecting[5] and/or [7] before confirmation

OPSTEL SKAKELTYDUR [3]

• Toegang tot programmeringsmodus (sien 2.1)
  • Druk [#] vir 5 sekondes, [#] sal begin flikker
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Druk [3] en bevestig met [#]
• [3] en [#] is albei verlig
• Enter a value between 1 and 99, and confirm with [#]. When all LEDs flash, your choice is saved
• Jy sal terugkeer na die hoofkieslys

In case an invalid time is entered, all LEDs flash two times. Menu [3] remains activated

The default time is set at 8 seconds

OPSTEL GRATIS UITGANG MODUS [4]
Die vrye-uitgang-modus-kieslys maak dit moontlik om 'n kant van die slot in 'free exit mode' te konfigureer. Aan die vrye-uitgang kant, is die invoer van 'n PIN-kode nie nodig nie: net om enige sleutel te druk sal die slot vir 'n voorafbepaalde tyd ontsluit.

• Toegang tot programmeringsmodus (sien 2.1)
  • Druk [#] vir 5 sekondes, [#] sal begin flikker
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Druk [4] en bevestig met [#]
• [4] en [#] is albei verlig
• The lights of button [5] and/or [7] indicate which side of the lock is configured in free exit mode.
• [7] is used for the side the user is currently using, while [5] is used for the other side. The Volta model with a keypad on one side shows only option [7]
• Pressing [5] and/or [7] will deselect (flashing) or select (permanently on) the corresponding side to be configured in free-exit mode
• Die keuse word bevestig deur die [#]-sleutel te druk
• Jy sal terugkeer na die hoofkieslys van die programmeringsmodus

The free-exit mode can be disabled by ddeselecting[5] and [7] before confirmation

STEL BELIGTINGSMODUS [5]

• Toegang tot programmeringsmodus (sien 2.1)
  • Druk [#] vir 5 sekondes, [#] sal begin flikker
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Druk [5] en bevestig met [#]
• [5] en [#] is albei verlig
• Kies die verlangde beligtingsmodus:
  1. Auto dim (default):
     • During normal operation, backlights are off. As soon as a button is pressed, they go to full brightness. After 5 seconds of inactivity, the lighting is switched off
  2. Backlight disabled:
     • Die agterligte sal nie brand wanneer 'n knoppie gedruk word nie
• Press [1] or [2] and confirm with [#]. When all LEDs flash, your choice is saved
• Jy sal terugkeer na die hoofkieslys

In case an invalid number is entered, all LEDs flash two times. Try again. Menu [5] remains activated

FABRIEKSTERUGSTEL [0]

• Toegang tot programmeringsmodus (sien 2.1)
  • Druk [#] vir 5 sekondes, [#] sal begin flikker
  • Enter the Master PIN code (default = 12345), and press [#]. If correct, [#] will remain lit as long as the programming mode is activated
• Druk [0] en bevestig met [#]
• [0] will flash rapidly to indicate that an irreversible action can be taken
• Enter the Master PIN and confirm by holding [#] for 2 seconds
• When all LEDs flash, the factory reset is complete. All settings are restored to default values

TERUGSTEL VAN DIE MEESTER PIN BY VERLIES VAN DIE MEESTER PIN
During the first 5 minutes after (re)placing the batteries, the default Master PIN (12345) can be used, along with the Master PIN that the user has chosen. Create a new Master PIN code following the steps in 2.2. A factory reset, as described in step 2.8, will permanently return the Master PIN to the default value 12345.

FUNCTIONING OF VOLTA

ENTER A CORRECT PIN CODE

• Enter a PIN code (min. 4 – max. 8 digits)
• Druk [#] om te bevestig
• A light sequence runs from the bottom to the top across the keypad, indicating that a correct code has been entered

VOER 'N VERKEERDE KODE IN

• Voer 'n verkeerde PIN in
• Druk [#] om te bevestig
• All LEDs flash twice, indicating a wrong code has been entered
• If 5 or more wrong codes are entered consecutively, you won’t be able to use the Volta for a certain period due to safety reasons.
• The time-out period is specified as follows:
  • 2 [aantal mislukte pogings] sekondes
  • Byvoorbeeldample: 6 failed attempts result in a time-out period of 64 seconds (26 seconds)

The time-out period is reset when a correct code is entered, or if no new code is entered during 2 hours

LAAG BATTERY WAARSKUWING
Wanneer die batterye begin leeg raak, sal die lae battery-aanwyser op die sleutelbord begin flikker wanneer 'n kode ingevoer word, wat aandui dat die tyd aangebreek het om die batterye te vervang.

VERVANG BATTERYE

• Remove the Volta from the gate
• Maak die deksel van die battery oop
• Vervang die batterypak
• Maak die deksel van die battery toe
• Mount the Volta module back on the gate

ONDERHOUD

• Maak die behuising en uitstalling skoon met 'n sagte lap wat met 'n neutrale skoonmaakmiddel bevochtig is.
• Moet nooit brandstof of chemikalieë op die toestel gebruik nie, aangesien dit die behuising kan beskadig.

ALGEMENE INLIGTING

• Please observe the local regulations on the deposit of packaging material and of appliances no longer in use. Our packaging material is eco-friendly. It can be divided into 2 materials: cardboard (box) and expandable polyester (buffer)
• Jou toestel is gemaak van herwinbare materiaal

WARRANTYA
2-year warranty covers all electronics.

• Federale Handelskommissie se reëls beperk die stuur van ongewenste kommersiële e-posboodskappe na rekenaars.
• A discarded device can either be returned to your dealer or sent back to ADG. This product’s recycling fee is € 0,2.
• The WEEE marking on the product indicates that it may not be thrown away together with normal household waste and must be handed over to a designated collection point for the recycling of electrical and electronic waste.
• As the manufacturer of this product, we guarantee that we have taken all the necessary steps to comply with the current safety requirements for this product.

www.adg.ie

Gereelde vrae