Anker SOLIX E10 Home Energy Storage System and Smart Inlet Box User Manual

Inleiding

The Anker SOLIX E10 Home Energy Storage System with Smart Inlet Box provides a reliable and efficient solution for whole-home backup power and smart energy management. This manual outlines the installation, operation, and maintenance procedures to ensure optimal performance and safety of your system.

Wat is in die boks

Your Anker SOLIX E10 + Smart Inlet Box package includes the following components:

• E10 Power Module
• B6000 Battery Module
• 240V Output Cable
• 120V AC Charging Cable
• Vaste hakie
• Smart Inlet Box
• ON-Grid Cable
• Backup Power Cable
• 3× CTs (Current Transformers)
• Vinnige Begingids

Opstelling en installasie

Proper installation is crucial for the safe and efficient operation of your Anker SOLIX E10 system. It is recommended to consult a certified electrician for installation.

Voorinstallasie-oorwegings

• Ligging: The E10 Power Module and Battery Module are NEMA 4 rated, suitable for outdoor use without shelter. The Smart Inlet Box is NEMA 3R rated. Ensure the installation location is on solid, flat ground or a load-bearing wall, away from living spaces.
• Opruiming: Maintain sufficient clearance from other devices and flammable materials. Ensure adequate space for heat dissipation.
• Hantering: Lift and move battery modules with two people due to their weight.
• Elektriese Paneel: Ensure your main electrical panel has sufficient space for the required circuit breakers (50A backup breaker and 40A charging/discharging breaker). An interlock device compatible with your panel manufacturer is required.

Monteer Opsies

The Anker SOLIX E10 system offers flexible mounting options:

• Vloermontering: Suitable for solid, flat ground not prone to flooding.
• Metal Base Mounting: Ideal for areas prone to flooding, elevating the system.
• Muurmontering: Recommended if the flood level is above the base.

For detailed visual instructions on mounting, please refer to the installation videos below.

Smart Inlet Box Installation

The Smart Inlet Box connects to your home's main electrical panel to manage the flow of power during outages.

1. Install the inlet box near the main panel, ensuring a good Wi-Fi signal.
2. Drill appropriate holes for conduit entry and secure the box to a wood stud.
3. Connect the on-grid cables (L1, L2, Neutral, Ground) from the main panel to the designated terminals in the Smart Inlet Box.
4. Connect the backup load cables (L1, L2) from the Smart Inlet Box to the designated backup breaker in your main panel.
5. Install a compatible interlock device on your main panel to prevent simultaneous operation of grid and backup power.
6. Connect the Current Transformers (CTs) around the phase cables (L1, L2) for accurate readings. If solar panels are connected, install a PV CT.
7. Connect the off-grid cable and on-grid cable from the Smart Inlet Box to the E10 Power Module.

Installation Video: Anker SOLIX Smart Inlet Box - Installation

This video provides a detailed guide on how to install the Anker SOLIX Smart Inlet Box, including wiring and safety precautions.

Installation Video: E10 & SIB installation guide video final 260109

A comprehensive installation guide for both the E10 Power Module and the Smart Inlet Box.

Bedryfsinstruksies

The Anker SOLIX E10 system provides seamless backup and smart energy management.

Manual Backup Operation

1. In die geval van 'n krag outage, turn off the main circuit breaker.
2. Switch the interlock to lock the main circuit breaker.
3. Turn on the backup load breaker.
4. Turn on the E10 Power Module by pressing its power button for 3 seconds.
5. Press the power button again to enable AC output. The light bar will turn blue, and the power module will begin supplying your backup loads.

Seamless Switchover Demonstration:

This video demonstrates the seamless power transfer during an outage with the Anker SOLIX E10.

Restoring Grid Power

1. When grid power is restored, turn off the backup load breaker.
2. Switch the interlock to lock the backup load breaker.
3. Skakel die hoofbreker aan.

Smart Savings and Storm Guard Mode

• Smart Savings: The Smart Inlet Box charges from the grid during off-peak hours and stores solar power, then uses this stored energy during expensive peak hours to reduce electricity bills by up to 80%.
• Storm Guard Mode: The system proactively monitors severe weather and charges the E10 to full capacity using solar and grid power, ensuring readiness for outages.

Central A/C Start Demonstration:

This video demonstrates the Anker SOLIX E10's capability to start a central air conditioning unit.

Laai en herlaai

The Anker SOLIX E10 battery modules can be recharged through various methods:

• AC muuraansluiting: Use the provided 120V AC Charging Cable to recharge via a standard wall outlet.
• Sonpanele: Connect compatible solar panels (up to 9kW per unit) to the photovoltaic ports on the E10 Power Module. Ensure the photovoltaic switch is set to OFF before connecting and ON after.
• Smart Generator: Connect the E10 to an Anker SOLIX Smart Generator 5500 using the DC charging cable (included with the generator).
• Third-Party Generator: Use an Anker SOLIX E10 AC Generator Adapter (sold separately) to recharge via a third-party generator.

Smart Generator Operation Guide:

This video details the operation of the Anker SOLIX Smart Generator, including connection and charging procedures for the E10.

Onderhoud

The Anker SOLIX E10 system is designed for durability and minimal maintenance. Regular checks can help ensure long-term performance:

• Keep the system free from dust and debris.
• Inspekteer kabels en verbindings gereeld vir enige tekens van slytasie of skade.
• Ensure proper ventilation around the units.

Probleemoplossing

If you encounter any issues with your Anker SOLIX E10 system, please refer to the Quick Start Guide included in your package or contact customer support for assistance.

Spesifikasies

Waarborg en Ondersteuning

The Anker SOLIX E10 Power Module comes with a 5-year warranty, and the Smart Inlet Box has a 10-year warranty. For professional installation support and service, expert assistance and pre-screened licensed electricians are available with transparent rates guaranteed.