Soundstream SPM.804

Soundstream SPM.804 8-Inch Midrange Pro Audio Speaker

Instruksie Handleiding

1. Inleiding

Thank you for choosing the Soundstream SPM.804 8-inch Midrange Pro Audio Speaker. This speaker is designed to deliver clear, high-energy sound for both car and professional audio systems. It features a durable construction for reliable performance and enhanced mid-frequency clarity.

Voorkant view of the Soundstream SPM.804 8-inch midrange speaker

Figuur 1: Voorkant view of the Soundstream SPM.804 speaker.

This manual provides essential information for the proper installation, operation, and maintenance of your SPM.804 speakers. Please read it thoroughly before installation and keep it for future reference.

2. Wat is in die boks

  • Soundstream SPM.804 8-inch Midrange Pro Audio Speaker (Pair)
Product packaging for the Soundstream SPM.804 speakers

Figure 2: Product packaging showing the pair of Soundstream SPM.804 speakers.

3. Opstelling en installering

3.1 Veiligheidsmaatreëls

  • Disconnect the vehicle's battery before starting any electrical work.
  • Ensure proper ventilation for the speakers to prevent overheating.
  • Gebruik gepaste gereedskap en dra veiligheidsbril tydens installasie.
  • Consult a professional installer if you are unsure about any steps.

3.2 Montering

The SPM.804 speakers are designed for easy installation into various enclosures or door panels. Ensure the mounting surface is sturdy and free from obstructions.

  • Montagediepte: 2.79 duim (70.8 mm)
  • Uitgesnyde deursnee: 7.17 duim (182 mm)
  1. Carefully measure and mark the desired mounting location.
  2. Cut a circular opening with the specified cut-out diameter.
  3. Boor vlieëniergate vir die monteerskroewe.
  4. Place the speaker into the opening, ensuring a snug fit.
  5. Secure the speaker with appropriate screws, tightening them evenly to prevent distortion of the speaker frame.
Hoekig view of the Soundstream SPM.804 speaker, showing the cone and surround

Figuur 3: Hoekig view of the speaker, illustrating its profile vir montering.

3.3 Bedrading

The SPM.804 speakers have a 4 Ohm impedance. Ensure your amplifier is stable at this impedance and can provide sufficient power.

  1. Identify the positive (+) and negative (-) terminals on the speaker and your amplifier. The speaker terminals are typically marked.
  2. Verbind die positiewe (+) terminaal van die luidspreker met die positiewe (+) uitset van jou amplifier using high-quality speaker wire.
  3. Verbind die negatiewe (-) terminaal van die luidspreker met die negatiewe (-) uitset van jou amplewendiger.
  4. Ensure all connections are secure and free from short circuits.
Agter view of the Soundstream SPM.804 speaker showing the terminals and magnet

Figuur 4: Agter view of the speaker, highlighting the wiring terminals.

4. Bedryfsinstruksies

4.1 Kraghantering

The SPM.804 speakers are rated for 250W RMS and 500W Max power. It is crucial to match your amplifier's output to these specifications to prevent damage.

  • Avoid overdriving the speakers with excessive power, which can lead to distortion and damage.
  • Stel jou amplifier's gain settings correctly to prevent clipping.

4.2 Inlooptydperk

Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.

4.3 Oorkruisinginstellings

For optimal performance and speaker longevity, it is recommended to use a high-pass filter (HPF) with your midrange speakers. A typical starting point for the crossover frequency is around 100-150 Hz, with a slope of 12dB/octave or 24dB/octave. Adjust this setting based on your system's overall frequency response and your listening preferences.

5. Onderhoud

Your Soundstream SPM.804 speakers require minimal maintenance to ensure long-lasting performance.

  • Keep the speakers free from dust and debris. Use a soft, dry cloth to gently wipe the cone and surround.
  • Vermy om die luidsprekers aan uiterste temperature of vog bloot te stel.
  • Do not apply any liquids or cleaning agents directly to the speaker cone or surround.
  • Regularly check wiring connections for tightness and corrosion.

6. Probleemoplossing

If you experience issues with your SPM.804 speakers, refer to the following common problems and solutions:

ProbleemMoontlike oorsaakOplossing
Geen klank van luidspreker nieLos of verkeerde bedrading; Amplifier off or in protect mode; Blown fuseKontroleer alle bedradingsverbindings; Verifieer amplifier status; Inspect and replace fuses if necessary
Verwronge klankAmplifier gain too high (clipping); Incorrect crossover settings; Damaged speakerVerminder amplifier gain; Adjust crossover frequencies; Inspect speaker for physical damage
Swak of gedempte klankIncorrect polarity (speaker wired out of phase); Low power from amplewendigerVerify speaker wire polarity (+ to + and - to -); Ensure amplifier is providing adequate power
Luidspreker sny afwisselend uitLoose connections; Overheating amplifier; Short circuit in wiringCheck all wiring; Ensure proper ventilation for amplifier; Inspect wiring for shorts

If the problem persists after attempting these solutions, please contact Soundstream customer support or a qualified audio technician.

7. Spesifikasies

Detailed technical specifications for the Soundstream SPM.804 speaker:

KenmerkSpesifikasie
ModelnommerSPM.804
Tipe luidsprekerMidrange Pro Audio Speaker
Luidsprekergrootte8 duim
Impedansie4 ohm
RMS Krag250 Watt
Maksimum krag500 Watt
Sensitiwiteit95.5 dB
Frekwensierespons100 Hz - 5 kHz (typical for midrange)
StemspoelHigh-temp EISV
Magneet materiaalFerrite (44 oz)
KegelmateriaalSwart Papier
Omliggende materiaalDoek
Mandjie MateriaalBlack-coated Steel
Montagediepte2.79 duim (70.8 mm)
Uitsny-deursnee7.17 duim (182 mm)
Itemafmetings (D x B x H)3.3" D x 8" B x 8" H
Eenheidtelling2.0 Telling (Paar)
VerbindingstegnologieBedraad
KleurSwart
UPC709483071797

8. Waarborginligting

Soundstream provides a 1-Year Manufacturer Limited Warranty for the SPM.804 speakers. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

The warranty does not cover damage caused by improper installation, abuse, accident, neglect, unauthorized repair, or modification. For full warranty terms and conditions, please refer to the official Soundstream webwebwerf of kontak kliëntediens.

9. Kliëntediens

For technical assistance, warranty inquiries, or additional product information, please visit the official Soundstream webwebwerf of kontak hul kliëntediensafdeling.

  • Klankstroom Amptelik Webwebwerf: www.klankstroom.com
  • Verwys na die webwebwerf vir kontakinligting, algemene vrae en bykomende hulpbronne.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.