Inleiding
Thank you for choosing the roborock Saros 20 Robot Vacuum and Mop. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.
Opstelling
Uitpak en plasing
Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present. Place the RockDock charging station in an open area with sufficient clearance for the robot to maneuver.
- Ensure at least 75cm (29.5 inches) clearance above the dock for tank removal.
- Ensure at least 40cm (15.7 inches) clearance on both sides of the dock.
- Ensure at least 120cm (47.2 inches) clearance in front of the dock.
Image: All components of the roborock Saros 20, including the robot vacuum, RockDock, mop pads, power cord, cleaning solution, and user manual.
Connecting the RockDock
- Connect the power cord to the back of the RockDock.
- Steek die kragadapter in 'n muuraansluiting.
- Install the dock base by sliding it into the designated slot at the bottom front of the RockDock.
Video: A quick start guide demonstrating the initial setup of the roborock Saros 20, including unboxing, dock placement, and power connection.
Initial Charging and App Connection
Place the robot vacuum onto the RockDock to charge. For first-time use, download the Roborock app and follow the on-screen instructions to connect your device to your home Wi-Fi network (supports both 2.4 GHz and 5 GHz networks).
Video: Instructions on how to connect the roborock Saros 20 to the mobile application for smart control and mapping.
Belangrik:
- For optimal mapping, run the robot in "Vacuum Only" mode twice before enabling mopping functions.
- Ensure your phone is on a 2.4GHz or 5GHz mixed Wi-Fi network during setup.
Bedryfsinstruksies
Skoonmaakmodusse
The roborock Saros 20 offers various cleaning modes accessible via the Roborock app:
- Slegs stofsuier: For dry debris on all surfaces.
- Slegs mop: For wet cleaning on hard floors.
- Stofsuig en mop: Gelyktydige stofsuig en mop.
- Gepasmaakte skoonmaak: Adjust suction power, water flow, and cleaning routes for specific rooms or zones.
Slim kenmerke
- AdaptiLift Chassis 3.0: Dynamically adjusts the robot's height to cross thresholds up to 3.46 inches and clean carpets up to 1.18 inches deep. The robot learns and remembers the best strategy for crossing obstacles.
- StarSight Outonome Stelsel 2.0: Advanced 3D ToF sensors and an RGB camera enable precise navigation and obstacle recognition (over 300 types). The robot can detect and avoid small objects and cables.
- DirTect-tegnologie: Identifies different types of messes (dry debris, liquid spills) and automatically adjusts cleaning strategy (boosts suction for dry, switches to mop-focused for liquid).
- FlexiArm Technology: Extends the side brush and mop to reach corners, edges, and under furniture (as low as 3.13 inches) for comprehensive coverage.
- AI-Powered App Control (SmartPlan 3.0): Learns your home layout and routines, optimizes cleaning sequences, and allows for voice control (e.g., "Hello Rocky").
Image: The roborock Saros 20 robot vacuum navigating around various household items on a wooden floor, demonstrating its obstacle avoidance capabilities.
Image: The roborock Saros 20 robot vacuum extending its side brush to clean along a wall and into a corner, highlighting its edge cleaning feature.
Onderhoud
Gereelde onderhoud verseker optimale werkverrigting en verleng die lewensduur van jou roborock Saros 20.
RockDock Maintenance
- Maak vuilwatertenk leeg: When the dirty water tank is full, remove it, empty the contents, rinse thoroughly, and securely close before reinstalling.
- Hervul die skoonwatertenk: Remove the clean water tank, fill with clean water, and securely close before reinstalling.
- Vervang Stofsak: When the dust bag is full, open the front panel, remove the old dust bag (the carrying handle will seal it), wipe the filter, and insert a new disposable dust bag securely.
- Clean Cleaning Tray: Remove the cleaning tray from the dock, rinse it clean, and wipe it dry before reinstalling.
- Clean Charging Contacts and Dock Location Beacon: Use a dry, soft cloth to wipe these components.
Video: A detailed guide on how to clean and maintain the RockDock of the roborock Saros 20, including emptying tanks and replacing the dust bag.
Robotstofsuieronderhoud
- Clean Dustbin and Filter: Remove the top cover, take out the dustbin, open the filter cover, remove the washable filter, and rinse both the dustbin and filter with water. Air-dry for at least 24 hours before reinstalling. (Do not use a brush or your fingers on the filter).
- Maak mopblokkies skoon: Remove the mop pads from the robot. Clean them with water and air-dry.
- Maak syborsels skoon: Remove the side brushes (using a screwdriver if necessary), clean any tangled hair or debris, and reinstall.
- Clean Omni-directional Wheel: Remove the omni-directional wheel, clean any tangled hair or debris, rinse with water, air-dry, and reinstall.
- Clean Main Brushes: Remove the main brush cover, remove the main brushes, clean any tangled hair or debris, wipe the main wheels, and reinstall the brushes and cover ensuring correct fitting.
Video: Instructions on how to maintain the roborock Saros 20 robot vacuum, covering cleaning of the dustbin, filters, brushes, and wheels.
Probleemoplossing
If you encounter issues with your roborock Saros 20, refer to the following common solutions:
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Robot not turning on. | Lae batteryvlak. | Place the robot on the RockDock to charge. |
| Die robot sit gereeld vas. | Obstacles (cables, small items) or high thresholds. | Clear the area of obstacles. Ensure AdaptiLift Chassis 3.0 is enabled in the app for high thresholds. |
| Swak skoonmaakprestasie. | Clogged brushes/filters, full dustbin, or dirty mop pads. | Clean/replace brushes and filters. Empty dustbin. Clean mop pads. |
| Mop pads detaching during cleaning. | Improper installation or worn-out pads. | Ensure mop pads are securely attached. Replace if worn. |
| Probleme met programverbinding. | Incorrect Wi-Fi password, wrong network band, or robot not in pairing mode. | Ensure correct Wi-Fi credentials. Check phone is on 2.4/5GHz mixed network. Reset Wi-Fi on robot (press Power and Dock buttons simultaneously for 3 seconds). |
For more detailed troubleshooting, please refer to the Roborock app or the official Roborock webwebwerf.
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Handelsmerk | roborock |
| Model Naam | Roborock Saros 20 |
| Suigkrag | 36,000 Pa |
| Obstacle Crossing | Up to 3.46 inches (double-layer threshold) |
| Carpet Cleaning Depth | Tot 1.18 duim |
| Robothoogte | 3.14 inches (Ultra Slim) |
| Mop Was Temperatuur | 212°F (Hot Water Wash) |
| Mop Droogtemperatuur | 131°F (Hot Air Drying) |
| Dust Emptying Interval | Up to 65 days (auto dust emptying) |
| Navigasiestelsel | StarSight Autonomous System 2.0 (3D ToF sensors, RGB camera) |
| Hindernisherkenning | Over 300 types of obstacles |
| Batterylewe | 180 minute |
| Geraasvlak | 55 Desibel |
| Beheer metode | App, Push Button, Voice (Amazon Alexa, Google Home, Siri, Matter) |
| Itemafmetings (L x B x H) | 18.7 cm L x 15 cm B x 19.2 cm H |
| Item gewig | 27.12 pond |
Waarborg & Ondersteuning
The roborock Saros 20 comes with a standard manufacturer's warranty. For specific warranty details and to register your product, please visit the official roborock webwebwerf.
Beskermingsplanne
Uitgebreide beskermingsplanne is beskikbaar vir aankoop:
- 2-jaar beskermingsplan: Eenmalige betaling van $119.99
- 3-jaar beskermingsplan: Eenmalige betaling van $159.99
- Volledige beskerming: Monthly payment of $16.99 (covers all eligible past and future purchases)
For technical support, troubleshooting assistance, or to inquire about service, please contact roborock customer service through the app or their official webwebwerf.
