FE05
Generic FE05 Digital Biometric Electronic Mortise Lock User Manual
Model: FE05
Inleiding
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Generic FE05 Digital Biometric Electronic Mortise Lock. The FE05 lock offers advanced security and convenience with multiple access methods, including biometric fingerprint recognition, numerical password, RFID card, and a traditional mechanical key. Please read this manual carefully before installation and use to ensure proper function and longevity of your lock.

Figuur 1: Voorkant view of the Generic FE05 Digital Biometric Electronic Mortise Lock.
Belangrike veiligheidsinligting
- Do not attempt to disassemble or repair the lock yourself. Contact qualified personnel for service.
- Keep mechanical keys in a safe place outside the property to be used as a backup.
- Use only high-quality alkaline AA batteries for optimal performance and to prevent leakage.
- Avoid exposing the lock to direct water or extreme temperatures.
- Ensure the door dimensions are compatible with the lock before installation.
Pakketinhoud
Verifieer dat alle items in die pakket teenwoordig is:
- 1 x Generic FE05 Digital Lock Unit
- 2 x Mechanical Backup Keys
- 2 x RFID-kaarte
- 1 x Kit of Screws and Hardware for Installation
- 1 x Gebruikershandleiding (hierdie dokument)
Spesifikasies
| Kenmerk | Beskrywing |
|---|---|
| Model | FE05 (also known as 6822) |
| Toegangsmetodes | Biometric Fingerprint, Numerical Password, RFID Card, Mechanical Key |
| Kragtoevoer | 4 x AA-batterye |
| Waarskuwing vir lae battery | Ja |
| Installasie tipe | Mortise (Embedded) |
| Versoenbare Deurdikte | 35 mm tot 55 mm |
| Kleur | Swart |
| Materiaal | Metaal, plastiek |
| Afmetings (L x B x H) | 30 x 7.5 x 2.2 cm |
| Spesiale kenmerke | Automatic Locking, Anti-Intrusion Alarm, Privacy Mode, Touch Display |
| Aanbevole gebruik | Residential, Offices, Commercial Spaces, Apartments, Condominiums |
Opstelling en installasie
1. Deurversoenbaarheidstoets
Before beginning installation, ensure your door's thickness is between 35 mm and 55 mm. The lock is designed for mortise installation in both wood and metal doors.
2. Mortise Lock Installation
Install the mortise lock body into the door according to standard mortise lock procedures. Ensure the latch bolt and deadbolt operate smoothly.

Figure 2: The internal mortise lock mechanism, showing the latch and deadbolt components.
3. Battery Installasie
The lock requires 4 AA alkaline batteries. Open the battery compartment cover on the interior unit. Insert the batteries, ensuring correct polarity (+/-). Close the cover securely.

Figuur 3: View of the battery compartment, showing slots for four AA batteries.
4. Initial Setup and Admin Registration
Upon first power-up, the lock will be in factory default mode. You must register an administrator fingerprint or password first. Refer to the on-screen prompts on the touch display for guided setup.
- Touch the display to activate.
- Follow the instructions to register the first administrator user (fingerprint or password). This user will have privileges to add or remove other users.
- It is recommended to register at least two administrator access methods for redundancy.

Figure 4: Front (keypad and fingerprint sensor) and back (battery cover) views of the FE05 lock.
Bedryfsinstruksies
Ontsluit die Deur
- Biometriese vingerafdruk: Plaas jou geregistreerde vinger op die vingerafdruksensor. Die slot sal ontsluit as die vingerafdruk herken word.
- Numerical Password: Touch the display to activate the keypad. Enter your registered password followed by '#'. The lock will unlock.
- RFID-kaart: Present a registered RFID card to the card reader area on the lock. The lock will unlock.
- Meganiese sleutel: Insert the mechanical key into the keyhole at the bottom of the exterior unit and turn to unlock. This is for emergency backup.
Sluit die deur
The FE05 lock features automatic locking. After the door closes, the lock will automatically engage the deadbolt after a short delay (configurable in settings).
Privaatheidmodus
Activate privacy mode from the interior unit to prevent external access, even with valid credentials. Refer to the lock's on-screen menu for specific steps to enable/disable this feature.
Onderhoud
Battery vervanging
When the low battery warning is displayed or heard, replace all four AA batteries promptly. Use only new, high-quality alkaline batteries. Refer to the "Battery Installation" section for instructions.
Skoonmaak
Clean the lock's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Slot reageer nie. | Dooie batterye. | Replace all four AA batteries. Use the mechanical key for emergency access. |
| Vingerafdruk nie herken nie. | Vinger is nat, vuil of verkeerd geplaas. Vingerafdruk nie geregistreer nie. | Maak seker dat die vinger skoon en droog is. Plaas die vinger stewig en heeltemal op die sensor. Herregistreer die vingerafdruk indien nodig. |
| Wagwoord nie aanvaar nie. | Incorrect password entered. Keypad not activated. | Ensure correct password is entered. Touch the display to activate the keypad before entering. |
| RFID-kaart werk nie. | Card not registered. Card damaged. | Ensure the RFID card is registered. Try another registered card. |
| Slot sluit nie outomaties nie. | Automatic locking feature disabled. Door not fully closed. | Check lock settings to ensure automatic locking is enabled. Ensure the door is properly aligned and closed. |
Waarborg en Ondersteuning
This Generic FE05 Digital Biometric Electronic Mortise Lock comes with a 6 maande waarborg from the date of purchase. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, unauthorized repairs, or improper installation.
For technical support, warranty claims, or further assistance, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty validation.