Inleiding
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your JONR H2 Pro Cordless Wet Dry Vacuum Cleaner. Please read this manual thoroughly before using the appliance and retain it for future reference.
Belangrike veiligheidsinstruksies
To reduce the risk of fire, electric shock, or injury, always follow basic precautions, including the following:
- Lees alle instruksies voordat u hierdie toestel gebruik.
- Moet nie buite of op nat oppervlaktes gebruik nie.
- Moenie toelaat dat dit as speelding gebruik word nie. Noukeurige aandag is nodig wanneer dit deur of naby kinders gebruik word.
- Gebruik slegs soos beskryf in hierdie handleiding. Gebruik slegs die vervaardiger se aanbevole aanhegsels.
- Moet nie met beskadigde koord of prop gebruik nie. Indien toestel nie werk soos dit moet nie, laat val, beskadig is, buite gelaat is of in water laat val het, stuur dit terug na 'n dienssentrum.
- Moenie aan koord trek of dra nie, gebruik koord as 'n handvatsel, maak 'n deur op koord toe, of trek koord om skerp kante of hoeke. Moenie die toestel oor die koord laat loop nie. Hou koord weg van verhitte oppervlaktes.
- Moenie die prop uittrek deur aan die koord te trek nie. Om die prop te ontkoppel, gryp die prop vas, nie die koord nie.
- Moenie prop of toestel met nat hande hanteer nie.
- Moenie enige voorwerp in openinge sit nie. Moet nie gebruik met enige opening geblokkeer nie; hou vry van stof, pluis, hare en enigiets wat lugvloei kan verminder.
- Hou hare, los klere, vingers en alle liggaamsdele weg van openinge en bewegende dele.
- Moenie iets optel wat brand of rook nie, soos sigarette, vuurhoutjies of warm as.
- Moet nie gebruik om vlambare of brandbare vloeistowwe, soos petrol, op te tel of in gebiede te gebruik waar hulle teenwoordig kan wees nie.
- Moet nie sonder stofsak en/of filters in plek gebruik nie.
- Skakel alle kontroles af voordat u die prop ontkoppel.
- Wees ekstra versigtig wanneer jy op trappe skoonmaak.
- Moet nie gebruik om giftige materiaal op te tel nie (chloorbleikmiddel, ammoniak, dreinskoonmaker, ens.).
- Moenie in 'n geslote ruimte gebruik waar dampe van oliebasisverf, verfverdunner, sommige motwerende stowwe, vlambare stof of ander plofbare of giftige dampe teenwoordig is nie.
- Koppel slegs aan 'n behoorlik geaarde uitlaat. Sien aardingsinstruksies.
Produk verbyview
The JONR H2 Pro is a versatile cordless wet dry vacuum cleaner designed for efficient floor cleaning. It features hot water self-cleaning, an OdorLock system, powerful suction, and a lie-flat design for comprehensive coverage.
Figure 1: What's in the Box. This image displays the JONR H2 Pro Wet & Dry Vacuum Cleaner, Charging Station, Power Cord, User Manual, Maintenance Brush, and Floor Cleaning Solution.
Opstelling en samestelling
- Hanteer installasie: Align the handle with the main body and push it firmly until it clicks into place.
Video 1: Handle Installation. This video demonstrates how to align and secure the handle onto the main body of the JONR H2 Pro (0:14-0:17).
- Charging Station Setup: Connect the power cord to the charging station and plug it into a wall outlet. Place the charging station on a flat, stable surface.
Video 2: Charging Station Connection. This video shows how to connect the power plug to the charging station, indicating it is ready for use (0:17-0:26).
- Vul skoonwatertenk: Press the release button to detach the clean water tank. Fill it with clean water up to the maximum level. Add 1.5 to 2 capfuls of JONR cleaning solution. Securely close the tank lid and reattach the tank to the main body.
Video 3: Filling the Clean Water Tank. This video illustrates the process of filling the clean water tank with water and adding the cleaning solution, then reattaching it to the vacuum (0:26-0:47).
- Installeer vuilwatertenk: Ensure the dirty water tank is properly closed and locked. Place it onto the base of the vacuum cleaner.
Video 4: Installing the Dirty Water Tank. This video demonstrates how to securely install the dirty water tank onto the vacuum cleaner's base (0:47-0:54).
Bedryfsinstruksies
- Krag aan: Druk die aan / uit-knoppie (⑂) on the handle to turn on the appliance. It will automatically start in Automatic Mode.
Video 5: Starting the Vacuum. This video shows pressing the power button to start the JONR H2 Pro in Automatic Mode (0:54-1:00).
- Kies skoonmaakmodus: Press the mode selection button (⑁) to cycle through available cleaning modes:
- Outomatiese modus: Vir algemene skoonmaaktake.
- Intensiewe modus: For stubborn stains and heavy dirt.
- Bathroom Mode: Designed for rapid water absorption and drying on bathroom surfaces.
Video 6: Mode Selection. This video demonstrates how to select different cleaning modes, including the specialized Bathroom Mode, using the mode button (1:10-1:14).
- Skoonmaak werking: Guide the vacuum cleaner across the floor. The 180° lie-flat design allows access under furniture. The triple-edge design helps clean corners and edges effectively.
Figure 2: 180° Lie-Flat Cleaning. This image shows the JONR H2 Pro operating in a fully reclined position, demonstrating its ability to clean under low-clearance furniture.
Figure 3: Triple-Edge Cleaning. This image highlights the vacuum's design for cleaning close to edges and into corners, ensuring thorough coverage.
Onderhoud en versorging
- Selfreinigende siklus: After use, return the H2 Pro to the charging station. Press the self-cleaning button (⑁) to initiate the hot water self-cleaning and air-drying cycle.
Video 7: Initiating Self-Cleaning. This video shows placing the vacuum on its charging station and pressing the self-cleaning button to start the cycle (1:17-1:24).
Figure 4: Deep Self-Cleaning. This image illustrates the hot water self-cleaning and hot air drying process for the roller brush, ensuring hygiene and preventing odors.
- Maak vuilwatertenk leeg en maak dit skoon: After the self-cleaning cycle, remove the dirty water tank. Open it from both sides and empty the contents. Rinse the tank with clean water and use the provided maintenance brush to clean the liquid level sensor and any residue.
Video 8: Cleaning the Dirty Water Tank. This video demonstrates how to remove, empty, and clean the dirty water tank, including using the maintenance brush for the sensor (1:24-1:40).
- Clean Roller Brush and Filter Sponge: Remove the roller brush and rinse it with clean water. Remove the filter sponge and clean it under running water. Allow all cleaned components to air dry completely before reassembling.
Video 9: Roller Brush and Filter Cleaning. This video shows how to remove and rinse the roller brush and filter sponge, emphasizing air drying before reassembly (1:40-2:18).
- Hermontering: Once all parts are dry, reinsert the filter sponge, install the roller brush, and then reattach the dirty water tank.
Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Vakuum skakel nie aan nie | Battery drained; Power button not pressed correctly. | Charge the vacuum; Ensure the power button is pressed firmly. |
| Swak suiging | Dirty water tank full; Roller brush tangled; Filter clogged. | Maak vuilwatertenk leeg; Maak rollerborsel skoon; Maak filter skoon of vervang dit. |
| Water lekkasie | Dirty water tank not properly installed/locked; Clean water tank lid not sealed. | Ensure dirty water tank is securely installed and locked; Check clean water tank lid for proper seal. |
| Onaangename reuk | Dirty water tank not cleaned; Roller brush not cleaned. | Empty and thoroughly clean dirty water tank; Clean roller brush and allow to air dry. |
| Self-cleaning not starting | Vacuum not correctly placed on charging station; Clean water tank empty. | Ensure vacuum is properly docked; Fill clean water tank. |
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Handelsmerk | JONR |
| Model | H2 Pro |
| Produk afmetings | 28L x 23W x 111H sentimeter |
| Item gewig | 7.89 pond (ongeveer 3.58 kg) |
| Skoonwatertenk kapasiteit | 1500ml |
| Vuilwatertenk kapasiteit | 600ml (bottom-mounted) |
| Suigkrag | 20,000 Pa |
| Scrubbing Speed | 500 BPM |
| Looptyd | Tot 45 minute |
| Self-Cleaning Temperature | 70°C Hot Water |
| Oppervlak-aanbeveling | Hard Floor, Hardwood, Tile |
Waarborg en Ondersteuning
For warranty information, technical support, or service inquiries, please refer to the official JONR website or contact JONR customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer Contact Information: Suzhoujingwakeji co.Itd, Unit A0403, Building 4, Suzhou International Science & Technology Park, No. 1355 Jinji Lake Avenue, Suzhou Industrial Park, Suzhou, Jiangsu 215000, China.