TOMZN TOB15-63 WiFi Smart Circuit Breaker User Manual

1. Inleiding

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your TOMZN TOB15-63 WiFi Smart Circuit Breaker. This device is designed to offer advanced electrical protection and remote control capabilities for various applications, including solar systems and general electrical circuits. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Veiligheidsinligting

WAARSKUWING: Gevaar van elektriese skok. Installasie en onderhoud moet slegs deur gekwalifiseerde personeel uitgevoer word.

• Ontkoppel altyd die krag voordat u die stroombreker installeer of diens.
• Maak seker dat alle bedrading voldoen aan plaaslike en nasionale elektriese kodes.
• Moenie die toestel gebruik as dit beskadig lyk nie.
• This device is designed for indoor use or in enclosures that protect it from direct weather exposure.
• Verifieer korrekte voltage en stroomgraderings voordat u aan enige stroombaan koppel.

3. Produkkenmerke

• Afstandbeheer: Manage power ON/OFF via the Ewelink application.
• Oor/Onder Voltage Beskerming: Skakel outomaties krag af wanneer voltage exceeds or falls below adjustable thresholds.
• Current Limiting Protection: Prevents damage from overcurrent by disconnecting power when current exceeds an adjustable limit.
• LCD-skerm: Intydse vertoning van voltage en huidige.
• Verstelbare Parameters: Gebruiker-konfigureerbare instellings vir oorvolumetage, onder-voltage, current limit, and delay-on time.
• Duursame konstruksie: Made with insulating, flame-retardant, and UV-resistant materials for long-term reliability.
• Veilige verbindings: Screw-type terminals ensure stable electrical connections.
• Veelsydige toepassing: Suitable for solar inverters, charge controllers, battery banks, and general circuit protection.

4. Spesifikasies

5. Installasie

The TOMZN TOB15-63 WiFi Smart Circuit Breaker is designed for DIN rail mounting within an electrical panel or suitable enclosure. Ensure the installation environment is dry and protected from direct sunlight and extreme temperatures.

1. Kragontkoppeling: Before starting, ensure the main power supply to the circuit is completely disconnected at the source. Use a voltag'n toetser om te bevestig dat daar geen krag teenwoordig is nie.
2. Montering: Securely mount the circuit breaker onto a standard DIN rail in your electrical panel.
3. Bedrading:
   • Connect the incoming live (L) and neutral (N) wires to the designated input terminals (usually marked 'IN' or with arrows pointing inwards).
   • Connect the outgoing live (L) and neutral (N) wires to the designated output terminals (usually marked 'OUT' or with arrows pointing outwards).
   • Ensure all connections are tight and secure using the screw-type terminals. Loose connections can cause overheating and fire hazards.
4. Verifikasie: Dubbelkontroleer alle bedradingsverbindings vir korrektheid en sekuriteit.
5. Herstel krag: Sodra die installasie voltooi en geverifieer is, herstel die krag na die stroombaan.

Figuur 1: Voorkant view of the TOMZN TOB15-63 WiFi Smart Circuit Breaker. This image shows the main switch, LCD display, 'SET' button, and up/down navigation buttons. The display shows "2.3.8.U" and the text "ON/OFF Press 5s to Pairing network" is visible below the navigation buttons.

6. WiFi and Ewelink App Setup

To utilize the smart features of your circuit breaker, you need to connect it to your WiFi network via the Ewelink application.

1. Download Ewelink App: Download and install the Ewelink app from your smartphone's app store (iOS or Android).
2. Registreer/Teken aan: Maak die toepassing oop en registreer 'n nuwe rekening of meld aan met 'n bestaande een.
3. Voer paringsmodus in: With the circuit breaker powered on, press and hold the "ON/OFF" button (located below the navigation buttons, as shown in Figure 1) for approximately 5 seconds until the WiFi indicator light starts blinking rapidly. This indicates the device is in pairing mode.
4. Voeg toestel in toepassing by: In the Ewelink app, tap the "+" icon to add a new device. Follow the on-screen instructions to select the device type (e.g., "Electrical Switch" or "Circuit Breaker") and connect it to your 2.4GHz WiFi network.
5. Bevestiging: Once successfully paired, the WiFi indicator light on the circuit breaker will become solid, and the device will appear in your Ewelink app. You can now rename the device and control it remotely.

7. Operasie

7.1. Handmatige beheer

• Hoofskakelaar: The red lever on the left side of the device (Figure 1) acts as a manual ON/OFF switch for the circuit. Push it up to turn ON, and down to turn OFF.

7.2. LCD-skerm en navigasie

The LCD display shows real-time electrical parameters. It typically cycles between displaying voltage (V) en stroom (A).

Figuur 2: Hoekig view of the TOMZN TOB15-63 WiFi Smart Circuit Breaker. This image highlights the LCD display showing "2.3.8.U" and text indicating adjustable over/under voltage and current limiting values, and that current and voltage display in turn.

• SET -knoppie: Press the 'SET' button to cycle through different display modes or to enter parameter adjustment mode.
• Op/af knoppies: Use the up and down arrow buttons to navigate through menu options or adjust parameter values when in adjustment mode.

7.3. Parameter Adjustment

To adjust protection parameters (over-voltage, onder-voltage, current limit, delay-on time):

1. Press and hold the 'SET' button for a few seconds until the display enters parameter adjustment mode.
2. Use the 'SET' button to cycle through the adjustable parameters (e.g., Over Voltage, Onder Voltage, Current Limit, Delay Time).
3. When the desired parameter is displayed, use the Up and Down arrow buttons to adjust its value.
4. After setting the value, press 'SET' again to confirm and move to the next parameter, or wait a few seconds for the device to automatically save and exit adjustment mode.

Refer to the Specifications section for the adjustable ranges of each parameter.

7.4. Remote Control via Ewelink App

• Open the Ewelink app on your smartphone.
• Select your TOMZN circuit breaker from the device list.
• Use the ON/OFF toggle in the app to remotely control the power supply.
• The app also allows you to view real-time voltage and current, set schedules, and configure protection parameters remotely.

8. Onderhoud

The TOMZN TOB15-63 WiFi Smart Circuit Breaker requires minimal maintenance. Regular checks can help ensure its longevity and reliable operation.

• Visuele inspeksie: Periodically inspect the device for any signs of physical damage, discoloration, or loose connections.
• Skoonmaak: Indien nodig, maak die buitekant van die toestel liggies skoon met 'n droë, sagte lap. Moenie vloeibare skoonmaakmiddels of oplosmiddels gebruik nie.
• Verbindingskontrole: Ensure all wiring connections remain tight and secure.
• Funksionaliteitstoets: Occasionally test the manual ON/OFF switch and verify that the LCD display is functioning correctly.

9. Probleemoplossing

10. Waarborg en Ondersteuning

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact your retailer. For technical support or inquiries, please reach out to the manufacturer or your point of purchase.