Partsam Wireless Trailer Lights Kit User Manual

1. Inleiding

This manual provides comprehensive instructions for the safe and effective use of your Partsam Wireless Trailer Lights Kit. This kit is designed to provide essential lighting functions for trailers, trucks, boats, and RVs, ensuring visibility and compliance with road safety regulations. Please read this manual thoroughly before installation and operation.

2. Produkkenmerke

• Strobe ligmodus: Enhanced safety and visibility, especially in low-light or adverse conditions.
• Maklike installasie: Magnetic suction cups allow for quick and secure attachment to metal surfaces.
• Stable Signals: Reliable wireless communication up to 100 feet (30 meters).
• Hoë helderheid: Superior LED illumination with a 60,000-hour lifespan for brake, turn, tail, running, and reverse functions.
• Vinnige laai: USB-C port for a full charge in 2.5 hours, providing up to 10 hours of continuous operation.
• IP65 Waterdig: Fully sealed design to withstand rain, dust, dirt, snow, and fog.
• 110° draaibaar: Adjustable light angle for optimal visibility.
• Anti-Loss Cable: Steel cable included for added security during travel.

3. Pakketinhoud

Verifieer dat alle items in jou pakket teenwoordig is:

• 2 x Wireless Trailer Lights
• 1 x Transmitter (4-pin or 7-pin compatible)
• 1 x USB-C laaikabel
• 1 x Motorlaaier
• 2 x Anti-Loss Steel Cables
• 2 x Iron Plates (for non-metal surfaces)
• 1 x Dratas

4. Opstelling en installering

4.1 Aanvanklike laai

Before first use, fully charge both wireless trailer lights using the provided USB-C charging cable and car charger. A full charge typically takes 2.5 hours.

4.2 Transmitter Connection

Plug the wireless transmitter into your vehicle's trailer wiring harness (4-pin or 7-pin, depending on your vehicle's connector). Ensure a secure connection.

4.3 Light Placement

1. Magnetiese aanhegting: The lights feature strong magnetic bases. Attach them securely to a clean, flat metal surface on the rear of your trailer, truck, boat, or RV. Ensure the surface is free of dirt, rust, or debris for optimal magnetic hold.
2. Non-Metal Surfaces: If your vehicle or trailer has non-metal surfaces (e.g., wood, fiberglass, aluminum), use the included iron plates. Securely mount the iron plates to the desired location, then attach the magnetic lights to these plates.
3. Pas hoek aan: The lights are 110° rotatable. Adjust the angle to ensure maximum visibility and proper light direction.
4. Anti-Loss Cable: For added security, especially during travel or on rough terrain, attach the anti-loss steel cables from the lights to a secure point on your trailer or vehicle. Tighten the screw on the cable to ensure it is firmly attached.

4.4 Signal Pairing

Once the transmitter is connected and lights are powered on, they should automatically pair. Verify all light functions are working correctly before driving.

5. Bedryfsinstruksies

5.1 Standard Light Functions

The Partsam Wireless Trailer Lights support the following standard functions, activated by your vehicle's signals:

• Agterligte: Illuminate when your vehicle's headlights are on.
• Brake Lights: Illuminate brightly when the brake pedal is pressed.
• Turn Signal Lights: Flash to indicate left or right turns.
• Agteruitligte: Illuminate when the vehicle is in reverse.
• Nommerplaatlig: Integrated into the tail light for license plate illumination.

5.2 Strobe Light Mode

To activate the strobe light mode for increased visibility:

1. Press the power button on the light unit.
2. Observe the blue indicator light turning on.
3. Hold the power button again for more than 5 seconds to engage the strobe function.

5.3 Operasionele video

6. Onderhoud

6.1 Skoonmaak

Regularly clean the light lenses and magnetic bases with a soft, damp cloth to ensure optimal light output and secure attachment. Avoid abrasive cleaners that could scratch the lenses.

6.2 Laai

Recharge the lights as needed. For optimal battery life, avoid completely draining the battery frequently. Store the lights fully charged if they will not be used for an extended period.

6.3 Weerbestandheid

The lights are IP65 waterproof, designed to withstand various weather conditions. However, prolonged submersion is not recommended.

7. Probleemoplossing

• Ligte skakel nie aan nie:
  • Ensure lights are fully charged.
  • Verify the transmitter is securely plugged into the vehicle's harness.
  • Check vehicle's trailer light fuse.
• Onderbroke sein/flikkering:
  • Ensure lights are within the 100ft operating range of the transmitter.
  • Check for obstructions between the transmitter and lights.
  • Ensure the transmitter connection is clean and secure.
• Lights Not Responding to Specific Functions (e.g., Turn Signal):
  • Verify your vehicle's wiring harness is correctly configured for all functions.
  • Check the vehicle's specific light fuse.
• Magnetic Hold Not Strong Enough:
  • Ensure the mounting surface is clean, flat, and made of ferrous metal.
  • For non-metal surfaces, use the provided iron plates.
  • Always use the anti-loss steel cables for added security.

8. Spesifikasies

9. Veiligheidsinligting

• Always ensure lights are securely attached and functioning correctly before operating your vehicle.
• Use the anti-loss steel cables to prevent accidental detachment, especially at high speeds or on uneven terrain.
• Do not attempt to modify the lights or transmitter. Unauthorized modifications may void the warranty and create safety hazards.
• Keep the lights and transmitter away from extreme heat sources.
• Ensure the magnetic bases are clean and free of metallic debris that could interfere with the magnetic hold.

10. Waarborg en Ondersteuning

For warranty information, technical support, or replacement parts, please contact Partsam customer service. Refer to the product packaging or the official Partsam webwebwerf vir die mees onlangse kontakbesonderhede.