Baseus BS1 NC Semi-in-Oor Geraasdempende Oordopjes Gebruikershandleiding

1. Produk verbyview

The Baseus BS1 NC Semi-in-Ear Noise Cancelling Earbuds offer a blend of comfort and advanced audio technology. Featuring Adaptive Hybrid Active Noise Cancellation (ANC), Hi-Res Audio with LDAC support, and a lightweight design, these earbuds are engineered for extended listening and clear communication. They are also equipped with a 6-microphone AI system for clear calls and IP55 water and dust resistance.

Image: Baseus BS1 NC Semi-in-Ear Noise Cancelling Earbuds and their charging case in black.

2. Pakketinhoud

Maak seker dat alle items in die pakket teenwoordig is:

• Baseus Bass BS1 NC Semi-in-Ear Earbuds (Left and Right)
• Laaikas
• USB-C-laaikabel
• Vinnige Begingids

Image: The complete retail package for the Baseus BS1 NC Earbuds, showing the earbuds, charging case, USB-C cable, and quick start guide.

3. Laai die oordopjes en houer

Vir optimale werkverrigting, laai die oordopjes en laaikas volledig voor die eerste gebruik.

3.1 Laai die oordopjes

1. Plaas die oorfone in die laaikas. Maak seker dat hulle korrek in hul onderskeie gleuwe geplaas is (L vir links, R vir regs).
2. Close the charging case. The earbuds will begin charging automatically.

3.2 Laai die saak

1. Connect the provided USB-C charging cable to the charging port on the case.
2. Koppel die ander kant van die kabel aan 'n USB-kragadapter (nie ingesluit nie) of 'n rekenaar se USB-poort.
3. The LED indicator on the case will show the charging status:
   • Groen: 75% - 100% gelaai
   • Geel: 25% - 75% gelaai
   • Rooi: Below 25% charged
4. A full charge for the case provides up to 40 hours of total playtime for the earbuds (with ANC off). A 10-minute charge can provide up to 2 hours of playback.

Image: The Baseus BS1 NC Earbuds resting in their open charging case, highlighting the 40-hour total playtime and rapid charging capabilities.

4. Paring en konnektiwiteit

4.1 Aanvanklike paring

1. Maak die laaikas oop. Die oorfone sal outomaties in paringsmodus gaan.
2. Aktiveer Bluetooth op jou toestel (slimfoon, tablet, rekenaar).
3. Soek vir "Baseus Bass BS1 NC" in the list of available Bluetooth devices.
4. Select "Baseus Bass BS1 NC" to connect. A voice prompt will confirm successful pairing.

4.2 Outomatiese herverbinding

Once paired, the earbuds will automatically reconnect to the last connected device when removed from the charging case and within Bluetooth range.

4.3 Meerpuntverbinding

The Baseus BS1 NC supports Baseus Smart-Connect (BSC) technology, allowing simultaneous connection to two devices. This enables seamless switching between audio sources without manual re-pairing.

To use multipoint connection:

1. Koppel die oorfone met jou eerste toestel.
2. Ontkoppel die oorfone van die eerste toestel se Bluetooth-instellings (moenie ontkoppel nie).
3. Koppel die oorfone met jou tweede toestel.
4. Reconnect the earbuds to the first device from its Bluetooth settings. The earbuds should now be connected to both devices.

Audio will automatically switch to the device playing content or receiving a call.

Image: A visual representation of the Baseus BS1 NC Earbuds connected to both a laptop and a smartphone, showcasing the instant multipoint connection feature.

5. Dra van die oordopjes

The Baseus BS1 NC earbuds feature a semi-in-ear design for comfortable, pressure-free wear. For optimal sound quality and noise cancellation, ensure a proper fit.

1. Identifiseer die linker (L) en regter (R) oordopjes.
2. Steek elke oordoppie versigtig in jou oorkanaal.
3. Adjust the earbud until it feels secure and comfortable. The stem should point slightly forward or downward.

Image: A person wearing the Baseus BS1 NC Earbuds, illustrating their ergonomic and lightweight design for all-day comfort.

6. Bedryfsinstruksies

6.1 Raak kontroles

The earbuds feature intuitive touch controls on their stems. The following are default functions, which may be customizable via the Baseus app:

Image: An illustration detailing the intuitive touch controls on the Baseus BS1 NC Earbuds for various functions like play/pause, call management, noise reduction, and voice assistant activation.

6.2 Geraasbeheermodusse

The Baseus BS1 NC earbuds offer three noise control modes:

• Adaptive Hybrid ANC (Active Noise Cancellation): Reduces ambient noise for an immersive listening experience. Ideal for noisy environments.
• Deursigtigheidmodus: Allows you to hear your surroundings while still enjoying your audio. Useful for awareness in urban settings or conversations.
• Normale modus: Standaard klankweergawe sonder aktiewe geraasonderdrukking of deursigtigheidsfunksies.

Switch between modes by pressing and holding the touch area on either earbud for 2 seconds.

Image: A cutaway diagram of a Baseus BS1 NC earbud in an ear, illustrating the semi-in-ear fit and the availability of Adaptive Noise Cancelling and Transparency Mode.

6.3 Hi-Res Audio with LDAC

These earbuds support LDAC technology, enabling high-resolution audio transmission for a detailed and rich sound experience. Ensure your device supports LDAC and activate it in your device's Bluetooth settings for the best audio quality.

Image: The Baseus BS1 NC Earbuds surrounded by sound waves, emphasizing features like Hi-Res Audio, SuperBass 2.0, and 13mm dynamic drivers for powerful sound.

6.4 6-Mic AI Clear Calls

The earbuds are equipped with 6 microphones and AI noise isolation technology to ensure your voice is clear during calls, even in noisy environments. Wind noise reduction further enhances call clarity outdoors.

Image: A detailed diagram of the Baseus BS1 NC earbud, highlighting the placement of the FF-Mic, FB-Mic, and Talk-Mic, which contribute to the 6-Mic AI Clear Call technology and wind-noise blocking design.

6.5 Slim toepassingbeheer

Download the dedicated Baseus app for enhanced control and customization options. The app allows you to:

• Adjust Bass Boost levels.
• Select from various EQ Modes.
• Control Spatial Acoustics settings.
• Gebruik die "Vind jou oordopjes"-funksie.

Note: In guest mode, no account creation or permissions are required to customize features, but GPS access is needed to locate lost earbuds.

Image: A smartphone displaying the Baseus app interface, which offers various sound control options including Bass Boost, EQ Modes, Spatial Acoustics, and a "Find Your Earbuds" function.

7. Onderhoud en versorging

7.1 Skoonmaak

• Maak die oordopjes en laaikas gereeld skoon met 'n sagte, droë, pluisvrye lap.
• Moenie harde chemikalieë, skoonmaakmiddels of sterk skoonmaakmiddels gebruik nie.
• Gently remove any earwax or debris from the earbud mesh and charging contacts using a small, soft brush or cotton swab.

7.2 Water- en stofbestandheid (IP55)

The earbuds are rated IP55, meaning they are protected against limited dust ingress and low-pressure water jets from any direction. This makes them suitable for workouts and light rain exposure.

• Moenie die oorfone in water dompel nie.
• Maak seker dat die oordopjes droog is voordat jy dit terug in die laaikas sit om skade aan die laaikontakte te voorkom.
• Die laaikas is nie waterbestand nie.

Image: The Baseus BS1 NC Earbuds shown with water droplets, signifying their IP55 rating for dust and water resistance.

7.3 Berging

Bêre die oordopjes in hul laaikas wanneer dit nie gebruik word nie om hulle te beskerm en gelaai te hou.

8. Probleemoplossing

If you encounter issues with your Baseus BS1 NC earbuds, refer to the following common solutions:

• Geen klank-/verbindingsprobleme nie:
  • Maak seker dat die oorfone gelaai is.
  • Verify Bluetooth is enabled on your device and "Baseus Bass BS1 NC" is selected.
  • Try placing earbuds back in the case, closing it, and then reopening to reset the connection.
  • Vergeet die toestel in jou Bluetooth-instellings en koppel weer saam.
• Een oordopjes werk nie:
  • Maak seker dat beide oordopjes gelaai is.
  • Place both earbuds back in the case, close, and reopen.
  • Maak die laaikontakte op beide oordopjes en binne-in die houer skoon.
• Swak klankgehalte:
  • Maak seker dat die oorfone behoorlik in jou ore sit.
  • Clean the earbud mesh to remove any obstructions.
  • Check your device's audio settings and ensure LDAC is enabled if supported.
• ANC nie effektief nie:
  • Ensure ANC mode is activated via touch control or the Baseus app.
  • Adjust the earbuds for a better seal in your ears.

9. Spesifikasies

10. Amptelike Produkvideo

Watch the official product video for a visual guide on the Baseus BS1 NC Earbuds:

11. Waarborg en Ondersteuning

For warranty information, technical support, FAQs, and further assistance, please visit the official Baseus support center.

Refer to the Quick Start Guide included in your package for a direct link or visit the Baseus webwebwerf.

Note: Protection plans may be available for purchase separately.