RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Inleiding

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Opstelling

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Uitpak en Aanvanklike Inspeksie

• Verwyder alle komponente versigtig uit die verpakking.
• Verifieer dat alle items wat op die paklys gelys word, teenwoordig is.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 Koppel die beheerder

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Krag oor Ethernet (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Eksterne kragadapter: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Kameraverbindings:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

Beeld 2.2: Voorbeeldample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Netwerkkonfigurasie

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web koppelvlak deur sy IP-adres in a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• Binne die web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Operasie

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 Oorview van kontroles

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

Beeld 3.2: Gedetailleerd view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Kamerakeuse

• Vinnige Kiesknoppies: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Numeriese sleutelbord: For cameras beyond the quick select buttons (up to 255), press the CAM ID button, then enter the camera number using the numeric keypad, and press ENTER.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 PTZ-beheer

• Joysticks: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• PT-spoedknop: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview modus.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: Druk die AUTO FOKUS button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• BACKLIGHT Button: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 Voorinstellings

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press ENTER om te spaar. Druk ESC om uit te gaan.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press ENTER to recall. Press ESC om uit te gaan.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Spyskaartnavigasie

• MENU-knoppie: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), ENTER confirms selections, and ESC acts as a back button.

4. Onderhoud

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Skoonmaak

• Use a soft, dry cloth to clean the exterior of the controller.
• Vir hardnekkige vuiligheid, effens dampMaak die lap skoon met water of 'n sagte, nie-skurende skoonmaakoplossing.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Berging

• When not in use for extended periods, store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Beskerm die toestel teen stof en vog.

5. Probleemoplossing

Hierdie afdeling bied oplossings vir algemene probleme wat u mag teëkom.

5.1 Geen krag

• Gaan kragbron na: Maak seker dat die kragadapter stewig aan beide die beheerder en 'n werkende kragaansluiting gekoppel is.
• PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Kabelintegriteit: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Netwerkverbinding: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Protokol wanpassing: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• Kamera ID: Ensure the correct camera ID is selected on the controller.
• Aantekenbewyse: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web koppelvlak.
• Serieverbinding: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webwebwerf vir opdaterings.

5.3 LCD-skermprobleme

• Geen skerm: Maak seker dat die beheerder aangeskakel is.
• Dowwe skerm: Check if there are any brightness settings on the controller that can be adjusted.

6. Spesifikasies

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Produkvideo-demonstrasie

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Waarborg en Ondersteuning

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webwebwerf.

• Vervaardiger: Xiamen RGBlink Science & Technology Co.,Ltd.
• Amptelik Webwebwerf: www.rgblink.com (Let wel: Hierdie is 'n plekhouer URL, please refer to your product packaging or official documentation for the correct support webwebwerf.)
• Kontakinligting: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.