uwant D700 Nat Droë Stofsuier Instruksiehandleiding

1. Belangrike veiligheidsinstruksies

Please read all safety instructions carefully before using the uwant D700 Wet Dry Vacuum Cleaner. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• This appliance is for household use only. Do not use outdoors or on commercial surfaces.
• Moenie die toestel in water of ander vloeistowwe dompel nie.
• Hou hare, los klere, vingers en alle dele van die liggaam weg van openinge en bewegende dele.
• Use only uwant recommended attachments and accessories.
• Moet nie gebruik om vlambare of brandbare vloeistowwe, soos petrol, op te tel of in gebiede te gebruik waar hulle teenwoordig kan wees nie.
• Moenie iets optel wat brand of rook nie, soos sigarette, vuurhoutjies of warm as.
• Always turn off the appliance before connecting or disconnecting the brush roll or other accessories.
• Bêre die toestel binnenshuis op 'n droë plek.

2. Produk verbyview

The uwant D700 is a versatile wet dry vacuum cleaner designed for efficient cleaning of various floor types. It features advanced technologies for superior performance and ease of use.

Figure 2.1: uwant D700 Wet Dry Vacuum Cleaner main unit.

Sleutel kenmerke:

• Intelligent Stain Detection: Automatically adjusts suction and water flow based on dirt level.
• 180° Flat Design: Allows cleaning under low furniture with ease.
• 2mm Edge Cleaning: D-shaped brush head ensures thorough cleaning along edges and corners.
• Push-in Self-Cleaning Station: Automated 100°C hot water wash and 75°C hot air drying for the brush roll.
• Electrolyzed Water Sterilization: Generates electrolyzed water to eliminate 99.99% of germs without chemical disinfectants.
• 8 000 Pa Suigkrag: Powerful suction for both wet and dry messes.
• Lang batterylewe: Up to 45 minutes of runtime for cleaning areas up to 300 m².

Figure 2.2: The D-shaped rotating brush offers a 6 times wider cleaning surface and 0mm edge cleaning on 3 sides.

3. Opstelling

3.1 Uitpak en monteer

Carefully remove all components from the packaging. Ensure all parts are present before assembly.

1. Steek die handvatsel in die hoofliggaam van die stofsuier totdat dit stewig in plek klik.
2. Place the clean water tank and dirty water tank into their respective compartments.
3. Ensure the brush roll is correctly installed in the brush head.

Figure 3.1: Illustration of the assembly process, showing components being connected.

3.2 Aanvanklike laai

Laai die stofsuier volledig voor die eerste gebruik.

1. Place the vacuum cleaner onto the self-cleaning station. The station is designed for easy push-in docking.
2. Connect the power adapter to the charging port on the station and plug it into a wall outlet.
3. The display will indicate charging status. A full charge typically takes approximately 4-5 hours.

Figure 3.2: The vacuum cleaner easily docks into its station with a single movement for charging and self-cleaning.

3.3 Vul die skoonwatertenk

The clean water tank supplies water for cleaning. For optimal performance, use tap water.

1. Verwyder die skoonwatertenk van die hoofeenheid.
2. Open the tank cap and fill with clean tap water up to the MAX line.
3. Close the cap securely and reinsert the tank into the vacuum cleaner.

Figure 3.3: Filling the clean water tank with tap water.

4. Bedryfsinstruksies

4.1 Aanskakel/Afskakel en Moduseleksie

Press the power button on the handle to turn the vacuum cleaner on or off. Use the mode button to switch between cleaning modes.

• Slim af: The vacuum automatically detects dirt levels and adjusts suction power and water flow. Ideal for general cleaning.
• Kragtige modus: Verskaf maksimum suiging en watervloei vir erg vuil areas.
• Droë modus: Suction only, suitable for picking up dry debris without water.

Figure 4.1: The intelligent dirt detection system automatically adjusts suction and water flow for different stain levels.

4.2 Skoonmaaktegnieke

For best results, move the vacuum cleaner slowly forward and backward over the area to be cleaned.

• Under Low Furniture: Utilize the 180° flat design by tilting the vacuum cleaner back to reach under sofas, beds, and other low-clearance areas.
• Rand skoonmaak: The D-shaped brush head is designed to clean within 2mm of edges, ensuring no spots are missed. Guide the vacuum along baseboards and furniture edges.
• Electrolyzed Water Function: The D700 automatically generates electrolyzed water for sterilization during cleaning. No additional disinfectants are needed.

Figure 4.2: The 180° flat design allows easy cleaning under low furniture and in tight corners.

Figure 4.3: The D-shaped rotating brush provides superior edge cleaning, reaching within 2mm of walls.

5. Onderhoud

Gereelde onderhoud verseker optimale werkverrigting en verleng die lewensduur van jou uwant D700.

5.1 Selfreinigingsiklus

After each use, it is recommended to run the self-cleaning cycle.

1. Place the vacuum cleaner on the self-cleaning station.
2. Press the self-clean button on the handle or station.
3. The station will perform a 100°C hot water wash of the brush roll, followed by 75°C hot air drying. This process helps prevent odors and bacterial growth.

Figure 5.1: The self-cleaning station performs a 100°C hot water wash and 75°C hot air drying for thorough brush maintenance.

Figure 5.2: The ultra-silent high-temperature drying chamber ensures quick and quiet drying of the brush roll.

5.2 Leegmaak en skoonmaak van die vuilwatertenk

Empty the dirty water tank after each use to prevent odors and maintain hygiene.

1. Verwyder die vuilwatertenk van die hoofeenheid.
2. Open the tank lid and carefully pour out the dirty water and debris.
3. Rinse the tank thoroughly with clean water. You can use the innovative deodorizing device to neutralize odors.
4. Allow the tank to air dry completely before reinserting it.

Figure 5.3: The innovative deodorizing device helps eliminate unpleasant odors from the dirty water tank.

5.3 Cleaning the Brush Roll and Filter

Even with self-cleaning, occasional manual cleaning of the brush roll and filter is recommended.

1. Turn off the vacuum cleaner and remove the brush roll cover.
2. Remove the brush roll. Rinse it under running water to remove any tangled hair or debris. The brush roll is IPX6 waterproof.
3. Remove the HEPA filter from the dirty water tank. Tap it gently to remove dust or rinse it if heavily soiled. Ensure it is completely dry before reinstallation.
4. Reassemble all parts once dry.

Figure 5.4: The IPX6 waterproof rotating brush can be easily rinsed for deep cleaning.

6. Probleemoplossing

If you encounter any issues with your uwant D700, please refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact uwant customer support for assistance.

7. Spesifikasies

8. Waarborg en Ondersteuning

The uwant D700 Wet Dry Vacuum Cleaner comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact uwant customer service. Contact information can typically be found on the official uwant webwebwerf of op die produkverpakking.

Please have your model number (D700) and purchase date ready when contacting support.