Valkyrie A360 ARGB All-in-One CPU Liquid Cooler User Manual

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your Valkyrie A360 ARGB All-in-One (AIO) CPU Liquid Cooler. Please read this manual thoroughly before installation to ensure proper setup and optimal performance. Keep this manual for future reference.

2. Veiligheidsinligting

• Maak seker dat jou rekenaarstelsel afgeskakel en uit die muurprop ontkoppel is voor installasie.
• Hanteer komponente versigtig om skade te voorkom. Vermy om die koue plaat se oppervlak direk aan te raak.
• Do not open the liquid cooler's pump or radiator; it is a sealed unit. Tampsal die waarborg nietig verklaar.
• Hou die produk weg van uiterste temperature, humiditeit en direkte sonlig.
• Use only the provided mounting hardware to prevent damage to your CPU or motherboard.

3. Pakketinhoud

Verifieer dat al die komponente wat hieronder gelys word, in u pakket teenwoordig is:

• Valkyrie A360 ARGB AIO Liquid Cooler (Radiator, Pump/CPU Block, Tubing)
• 3 x 120 mm ARGB-waaiers
• Intel Mounting Bracket Kit (LGA 1700, 1200, 115X, 2066, 2011)
• AMD-monteerbeugelstel (AM5, AM4)
• Fan Screws and Radiator Mounting Screws
• Termiese pasta (vooraf aangewend of in 'n buis)
• ARGB Controller/Cables (if included)
• Gebruikershandleiding

Image: The Valkyrie A360 ARGB AIO Liquid Cooler showing the radiator, three ARGB fans, and the pump/CPU block unit.

4. Opstelling en installering

4.1. Voorbereiding

• Skakel jou rekenaar af en ontkoppel alle kabels.
• Open your computer case to access the motherboard and CPU area.
• As jy 'n bestaande verkoeler vervang, verwyder dit versigtig en maak enige ou termiese pasta van die SVE-oppervlak skoon met isopropylalkohol.

4.2. Installasie van verkoeler en waaier

1. Attach the three 120mm ARGB fans to the radiator using the long fan screws provided. Ensure the fan airflow direction is appropriate for your case (typically exhausting air out or pulling air in).
2. Mount the assembled radiator and fans to an available 360mm mounting location in your PC case (e.g., top, front). Use the shorter radiator mounting screws.

Image: The radiator with three white fans attached, ready for case installation.

4.3. CPU-blokinstallasie

1. Vir Intel-sokke: Install the appropriate Intel backplate behind the motherboard. Attach the Intel mounting standoffs to the motherboard.
2. Vir AMD-sokke: Remove the stock AMD retention brackets from the motherboard, but keep the original backplate. Attach the AMD mounting standoffs to the motherboard.
3. Indien termiese pasta nie vooraf op die koue plaat aangebring is nie, dien 'n klein ertjie-grootte hoeveelheid toe in die middel van jou SVE se Geïntegreerde Hitteverspreider (IHS).
4. Carefully place the CPU block onto the CPU, aligning the mounting holes with the standoffs.
5. Secure the CPU block with the thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

Beeld: 'n Nabyskoot view of the Valkyrie A360 CPU block installed on a motherboard, illuminated with blue ARGB lighting.

4.4. Kabelverbindings

1. Connect the pump's 3-pin or 4-pin power cable to the motherboard header labeled "AIO_PUMP," "CPU_OPT," or "SYS_FAN" (consult your motherboard manual for the recommended header).
2. Connect the ARGB cables from the fans and pump to the included ARGB controller or directly to a 5V 3-pin ARGB header on your motherboard. Ensure correct pin alignment to avoid damage.
3. Connect the fan power cables to available fan headers on your motherboard or to a fan hub/controller.

Image: The Valkyrie A360 AIO cooler fully installed within a white PC case, showcasing the blue ARGB lighting on the fans and CPU block.

5. Bedryfsinstruksies

5.1. Aanvanklike Aanskakeling

After completing the installation, close your PC case, reconnect all external cables, and power on your computer. Observe the cooler for any unusual noises or leaks. Check your system's BIOS/UEFI for CPU temperature readings to confirm proper operation.

5.2. ARGB-beligtingsbeheer

If connected to a motherboard's 5V 3-pin ARGB header, you can control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). If using the included ARGB controller, refer to its specific instructions for mode and color selection.

Image: The Valkyrie A360 AIO cooler installed in a white PC case, displaying vibrant rainbow ARGB lighting effects on the fans and CPU block.

6. Onderhoud

• Stof skoonmaak: Periodically clean the radiator fins and fan blades to prevent dust buildup, which can impede airflow and cooling performance. Use compressed air or a soft brush.
• Visuele inspeksie: Regularly check the tubing and connections for any signs of leaks or damage.
• No Coolant Refill: The Valkyrie A360 is a sealed AIO unit and does not require coolant refills. Opening the unit will void the warranty.

7. Probleemoplossing

8. Spesifikasies

9. Waarborg en Ondersteuning

Valkyrie products are backed by a limited warranty against defects in materials and workmanship. The specific warranty period may vary by region. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please visit the official Valkyrie webwebwerf of kontak hul kliëntediensafdeling. Kontakbesonderhede kan tipies op die produkverpakking of die amptelike webwebwerf.

Note: Opening the sealed AIO unit or using non-approved components may void your warranty.