1. Inleiding
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Mean Well EDR-120-24 AC/DC DIN Rail Power Supply. The EDR-120 series is an economical, slim 120W power supply designed for industrial applications. It is suitable for installation on TS-35/7.5 or TS-35/15 mounting rails, featuring a compact 40mm width for space-saving within cabinets. This unit operates effectively in ambient temperatures between -20℃ and 60℃ under air convection.
Please Note: The EDR series is primarily for industrial applications. For household applications, please choose the NDR series.
2. Veiligheidsinligting
Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Gekwalifiseerde personeel: Installasie en onderhoud moet slegs deur gekwalifiseerde personeel uitgevoer word.
- Kragontkoppeling: Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Behoorlike aarding: Verseker behoorlike aarding om elektriese skok te voorkom.
- Ventilasie: Maintain adequate ventilation around the unit. Do not obstruct ventilation openings.
- Omgewingstoestande: Operate the power supply within the specified temperature and humidity ranges. Avoid exposure to moisture or corrosive environments.
- Draad spesifikasies: Use copper wire only, rated for a minimum of 75℃.
- Industriële gebruik: This product is designed for industrial control equipment.
3. Produk verbyview en kenmerke
The EDR-120-24 is a robust AC/DC power supply offering reliable performance for various industrial needs. Key features include:
- Uitset: 24 V, 5 A, 120 W.
- Invoer Voltage: 90 ~ 264VAC / 124 ~ 370VDC.
- Beskermings: Short circuit, Overload, Over Voltage, Oor temperatuur.
- Doeltreffendheid: High efficiency of 87.5% (typical).
- Sertifiserings: UL and CE certified, UL 508 (Industrial Control Equipment) approved.
- Kompakte ontwerp: Slim 40mm width for space-saving DIN rail mounting.
- Verkoeling: Air convection cooling.
Figuur 1: Voorkant view of the Mean Well EDR-120-24 power supply, showing input/output terminals, voltage adjustment, and DC OK indicator.
4. Meganiese spesifikasies
The EDR-120-24 features a compact design suitable for DIN rail mounting. Detailed dimensions are provided below.
Figure 2: Mechanical drawing of the EDR-120-24, showing top, side, front, and bottom views with dimensions in millimeters (tolerance ±1mm).
Terminale pentoewysing
| Speldnr. | Opdrag |
|---|---|
| 1 | FG (raamgrond) |
| 2 | AC/N or DC - |
| 3 | AC/L of DC + |
| Speldnr. | Opdrag |
|---|---|
| 1,2 | DC UITVOER -V |
| 3,4 | DC UITSET +V |
5. Installasie (Opstelling)
Follow these steps for proper installation of the EDR-120-24 power supply.
5.1 Montering
- The EDR-120-24 is designed for DIN rail mounting on TS-35/7.5 or TS-35/15 rails.
- Ensure sufficient clearance for air circulation. A minimum of 5mm left and right, 40mm above, and 20mm below the power supply is recommended for optimal cooling.
- To mount, hook the top edge of the power supply onto the DIN rail, then push the bottom edge firmly until it clicks into place.
Figuur 3: Kant view illustrating the DIN rail mounting mechanism.
5.2 Bedrading
All connections are made via screw terminal blocks. Refer to the Terminal Pin Assignment tables in Section 4.
- Input Wiring (TB1): Connect the AC mains (L, N) or DC input (+, -) to the corresponding terminals. Ensure the Frame Ground (FG) terminal is properly connected to earth ground. The input voltagDie reeks is 90-264VAC of 127-370VDC.
- Output Wiring (TB2): Connect your load to the DC OUTPUT +V and -V terminals.
- Draad tipe: Use copper wire only, rated for a minimum of 75℃.
- Wringkrag: Ensure terminal screws are tightened to the specified torque (Input: 6.5 Lb-in, Output: 5.5 Lb-in) to prevent loose connections.
Figuur 4: Example wiring diagrams for different input configurations. Always refer to the product label for specific terminal markings.
6. Operasie
Once installed and wired correctly, the EDR-120-24 is ready for operation.
- Krag aan: Apply the specified AC or DC input voltage.
- DC OK Indicator: A green LED labeled "DC OK" will illuminate when the output voltage is binne die aanvaarbare omvang.
- Uitset Voltage Aanpassing: Die uitset voltage can be finely adjusted using the "+V ADJ" potentiometer located on the front panel. Use a small screwdriver to turn the potentiometer clockwise to increase voltage or counter-clockwise to decrease it.
7. Onderhoud
The EDR-120-24 is designed for long-term reliability with minimal maintenance. However, periodic checks are recommended.
- Skoonmaak: Keep the unit clean and free from dust and debris, especially around ventilation openings, to ensure proper air convection cooling. Use a soft, dry cloth for cleaning.
- Verbindingskontroles: Periodically inspect all wiring connections for tightness and signs of corrosion. Re-tighten screws if necessary after disconnecting power.
- Omgewingsmonitering: Verseker dat die bedryfsomgewing binne die gespesifiseerde temperatuur- en humiditeitslimiete bly.
8. Probleemoplossing
If the power supply is not functioning as expected, consider the following common issues:
- No Output / DC OK LED Off:
- Check input power connections and voltage.
- Verify that the input fuse (if external) is intact.
- Check for short circuits or overloads on the output. Disconnect the load and re-test.
- Ensure the ambient temperature is within the operating range.
- Intermitterende werking:
- Kyk vir los bedrading verbindings.
- Verify that the load current does not exceed the rated output current (5A). Overload protection may be activating.
- Ensure adequate ventilation to prevent over-temperature shutdown.
- Verkeerde Uitsetvolumetage:
- Adjust the "+V ADJ" potentiometer.
- Verifieer die invoer voltage is stable and within the specified range.
If problems persist after checking these points, contact qualified service personnel or the manufacturer.
9. Tegniese spesifikasies
| Parameter | Waarde |
|---|---|
| Model Naam | EDR-120-24 |
| Uitset Voltage | 24 V |
| Gegradeerde huidige | 5A |
| Uitset krag | 120 W |
| Invoer Voltage Reeks | 90 ~ 264VAC / 127 ~ 370VDC |
| Invoerfrekwensie | 47 tot 63 XNUMX Hz |
| Doeltreffendheid (tipe) | 87.5% |
| Rimpeling en geraas (maks.) | 120mVp-p |
| Lynregulering | 0.5% |
| Lasregulasie | 1% |
| Minimum Isolation Voltage | 3000VAC |
| Beskermings | Short circuit, Overload, Over Voltage, oor temperatuur |
| Bedryfstemperatuur | -20℃ tot 60℃ |
| Verkoelingsmetode | Air Convection |
| Afmetings (L x B x H) | 113.5 x 40 x 125.2 mm (4.47 x 1.57 x 4.93 duim) |
| Montering | DIN Rail |
| Gewig | 600g |
| Sertifiserings | UL, CE, EU RoHS Compliant |
10. Waarborg en Ondersteuning
This Mean Well power supply is manufactured to high-quality standards. For warranty information, please refer to the documentation provided with your purchase or contact your distributor. For technical support or service inquiries, please reach out to the seller or the official Mean Well support channels.
Manufacturer: MEAN WELL ENTERPRISES CO., LTD.
Distributed by: KAINSC PRODUCTS KAWAGUCH INDUSTRIAL SCIENTIFIC
