iMaihom 50W Motion Sensor Outdoor Light

Inleiding

Thank you for choosing the iMaihom 50W Motion Sensor Outdoor Light. This hardwired LED floodlight provides 5000 lumens of 6500K daylight white light, enhancing security and visibility for your outdoor spaces. Featuring advanced motion detection and a dusk-to-dawn function, this IP65 waterproof light is designed for reliable performance in various weather conditions. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Veiligheidsinligting

• Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture.
• Raadpleeg 'n gekwalifiseerde elektrisiën as jy onseker is oor die installasieproses.
• Ensure all electrical connections are made according to local codes and ordinances.
• Moenie direk in die LED-ligbron kyk wanneer dit brand nie, aangesien dit oogskade kan veroorsaak.
• This product is designed for outdoor use and is IP65 waterproof. However, ensure proper sealing during installation to maintain water resistance.
• Do not attempt to disassemble or modify the fixture, as this will void the warranty and may pose a safety risk.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• iMaihom 50W Motion Sensor Outdoor Light (1 unit)
• Monteringsbeugel (1 eenheid)
• Wire Nuts (2 units)
• Screws and Expansion Rubber Plugs (various quantities for mounting)
• Gasket (1 unit)
• Instructiehandleiding (hierdie dokument)

Figure 1: Included Parts List

Produk Kenmerke

• Helder beligting: Emits 5000 lumens of 6500K daylight white light for extensive coverage.
• Gevorderde bewegingsopsporing: Features a 180-degree detection angle and a 19–72 ft range, with adjustable lighting duration from 1–10 minutes.
• Dusk to Dawn Function: Built-in light sensor automatically turns the floodlight ON at dusk and OFF at dawn.
• IP65 Waterdig: Designed to withstand harsh weather conditions, ensuring year-round reliability.
• Maklike installasie: Simple 3-step hardwired installation process.
• Verstelbare koppe: Three light heads are 360° adjustable to direct light where needed.

Opstelling en installasie

Before installation, ensure the power supply is turned off at the circuit breaker to prevent electrical shock.

1. Verwyder ou toebehore (indien van toepassing): Carefully disconnect and remove any existing light fixture from the junction box.
2. Installeer montagebeugel: Secure the provided mounting bracket to the junction box using the appropriate screws. Ensure it is firmly attached.
3. Koppel bedrading: Connect the wires from the new iMaihom light to the household wiring using the included wire nuts. Match colors: black to black (hot), white to white (neutral), and green to ground (bare copper). Wrap electrical tape around wire nuts for added security.
4. Monteer die lig: Align the light fixture with the mounting bracket and secure it with the long machine screw provided. Ensure the gasket is properly seated between the fixture and the mounting surface to prevent water intrusion.
5. Verstel ligkoppe: Loosen the Phillips screw on the main head to adjust its angle. The side LED heads can also be articulated to direct light as desired.

Figure 2: Hardwired Installation Steps

Figure 3: Wall Mounted and Soffit Mounted Options

Bedryfsinstruksies

The iMaihom motion sensor light offers multiple operating modes and adjustable settings located on the bottom of the motion sensor unit.

Beheerskakelaars:

• TEST Mode (Left Dial): Used for initial setup and testing. In this mode, the light will turn on for 5 seconds when motion is detected, regardless of ambient light.
• TIME (Middle Dial): Verstel die duur wat die lig aanbly nadat beweging bespeur is, van 10 sekondes tot 10 minute.
• SENSITIVITY (Right Dial): Controls the detection range of the motion sensor (L: 19-26.2ft, M: 26.2-39.3ft, H: 39.3-72ft). Adjust this to prevent false triggers from small animals or distant objects.

Bedryfsmodusse:

• Bewegingsensormodus: The light activates only when motion is detected in dark conditions. The duration and sensitivity are set by the TIME and SENSITIVITY dials.
• Dusk to Dawn Mode (D2D): The built-in photocell sensor automatically turns the light ON when ambient light levels fall below a certain threshold (dusk) and OFF when light levels rise (dawn). Motion detection is typically overridden or integrated based on specific settings.

Figure 4: Control Dials for Settings

Figure 5: Dusk to Dawn Mode Operation

Onderhoud

• Skoonmaak: Maak die toebehore skoon met 'n sagte, damp lap. Moenie skuur skoonmaakmiddels of oplosmiddels gebruik nie.
• Inspeksie: Inspekteer die toebehore gereeld vir enige tekens van skade, los verbindings of slytasie.
• Lensversorging: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure optimal performance.

Probleemoplossing

Spesifikasies

Waarborg en Ondersteuning

iMaihom products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official iMaihom webwebwerf. Bewaar u aankoopbewys as bewys van aankoop vir waarborgeise.