DIGITEN THT1032 Temperature and Humidity Controller with Timer User Manual

1. Inleiding

The DIGITEN THT1032 is a versatile temperature and humidity controller designed for precise environmental management. It features three independent outlets for controlling heating/cooling, humidification/dehumidification, and timed operations. Equipped with dual high-precision probes, this device is suitable for various applications including reptile enclosures, mushroom cultivation, plant seeding, and home brewing.

2. Sleutel kenmerke

• Plug & Play-werking: Simple setup with intuitive buttons for quick configuration.
• Dual High-Precision Probes: Separate probes for temperature (accuracy: ±0.4°C/±0.7°F) and humidity (accuracy: ±3%).
• Triple-Zone Precision Control: Three independent outlets for temperature, humidity, and timed devices.
• Groot LCD-skerm: Clear, real-time monitoring with switchable Fahrenheit/Celsius units.
• Climate Customization: Combine heating/cooling with humidification/dehumidification, and program the third outlet for timers.

3. Pakketinhoud

• DIGITEN THT1032 Controller Unit
• Temperatuursonde
• Humiditeitsonde
• Gebruikershandleiding

4. Produk verbyview

The DIGITEN THT1032 controller features a main unit with a large LCD display, control buttons, three power outlets, and two external probes for temperature and humidity sensing.

Beeld 1: Voorkant view of the DIGITEN THT1032 controller, showing the display, buttons, and three power outlets.

4.1. Beheerpaneel en skerm

The front panel includes an LCD screen and four control buttons: SET, MODE, Up (▲), and Down (▼).

Beeld 2: Gedetailleerd view of the controller's outlets and control buttons. OUT1 is for temperature, OUT2 for humidity, and OUT3 for timer functions.

• SET -knoppie: Used to select an outlet for configuration or confirm settings.
• MODUS-knoppie: Used to change the operating mode (e.g., heating/cooling, humidification/dehumidification, timer program).
• Op (▲) Knoppie: Increases values or navigates menu options.
• Af (▼) Knoppie: Decreases values or navigates menu options.
• UIT1: Temperature controlled outlet.
• UIT2: Humidity controlled outlet.
• UIT3: Timer controlled outlet.

4.2. Ondersoeke

The controller comes with two separate probes: one for temperature and one for humidity. These probes are essential for accurate environmental monitoring.

Image 3: The temperature probe (left) and humidity probe (right) connected to the controller, illustrating their distinct functions.

5. Aanvanklike Opstelling

1. Verbind Probes: Plug the temperature probe and humidity probe into their respective ports on the controller. Ensure they are securely connected.
2. Plasing: Position the probes in the environment you wish to monitor and control. Ensure they are not directly exposed to heat sources, moisture, or airflow that could skew readings.
3. Krag aan: Plug the controller into a standard 120V AC power outlet. The display will illuminate, showing current temperature, humidity, and time.
4. Koppel toestelle: Plug your heating/cooling device into OUT1, your humidification/dehumidification device into OUT2, and any timed appliance (e.g., lights, misters) into OUT3.

6. Bedryfsinstruksies

6.1. Setting Temperature Control (OUT1)

1. Druk die STEL button repeatedly until OUT1 is selected (indicated by a flashing OUT1 icon or similar).
2. Gebruik die Op (▲) or Af (▼) knoppies om die verlangde teikentemperatuur aan te pas.
3. Druk MODUS to cycle through heating (HEAT) or cooling (COOL) modes. Select the appropriate mode for your connected device.
4. Druk STEL to confirm the temperature and mode.
5. To set the temperature differential (hysteresis), press and hold STEL for a few seconds when OUT1 is selected. Use Op/af to adjust the difference between the set point and when the device turns on/off. Press STEL te bevestig.

6.2. Setting Humidity Control (OUT2)

1. Druk die STEL button repeatedly until OUT2 is selected.
2. Gebruik die Op (▲) or Af (▼) buttons to adjust the desired target humidity percentage.
3. Druk MODUS to cycle through humidification (HUMIDIFICATION) or dehumidification (DEHUMIDIFICATION) modes. Select the appropriate mode.
4. Druk STEL to confirm the humidity and mode.
5. To set the humidity differential, press and hold STEL for a few seconds when OUT2 is selected. Use Op/af om aan te pas. Druk STEL te bevestig.

6.3. Setting Timer Control (OUT3)

1. Druk die STEL button repeatedly until OUT3 is selected.
2. Druk MODUS to enter the timer programming interface.
3. Gebruik Op (▲) or Af (▼) to set the ON time (hour and minute). Press STEL om na die volgende instelling te beweeg.
4. Stel die AF-tyd (uur en minuut) met behulp van Op/af en STEL.
5. The controller supports multiple ON/OFF programs for OUT3. Refer to the on-screen prompts for additional program slots.
6. Druk STEL to save and exit the timer settings.

6.4. Skakeltemperatuureenhede (°C/°F)

To switch between Celsius and Fahrenheit, press and hold the Op (▲) button for approximately 3 seconds. The display will change accordingly.

7. Onderhoud

• Skoonmaak: Vee die beheereenheid af met 'n sagte, droë lap. Moenie skuurmiddels gebruik of die eenheid in water dompel nie.
• Sondeversorging: Keep the probes clean and free from debris. Avoid bending or damaging the probe cables. If probes become dirty, gently clean them with a damp cloth and allow them to dry completely before re-use.
• Berging: Wanneer dit nie gebruik word nie, bêre die beheerder op 'n koel, droë plek weg van direkte sonlig en uiterste temperature.

8. Probleemoplossing

9. Tegniese spesifikasies

10. Waarborg en Kliëntediens

DIGITEN provides a one-year warranty for any quality-related issues with this product. For technical assistance, troubleshooting, or warranty claims, please contact DIGITEN customer support through the retailer where the product was purchased or visit the official DIGITEN webwebwerf vir kontakinligting.

Bewaar asseblief u aankoopbewys vir waarborgdiens.