Andeman 4000A Aansitmotor (Model EP-166) Gebruikershandleiding

1. Inleiding

Thank you for choosing the Andeman 4000A Jump Starter, Model EP-166. This device is designed to provide reliable power for jump-starting vehicles and charging electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

1.1. Wat is in die boks

• Epower-166 Jump Starter Unit x1
• Slim Clamps x1
• Type-C laadkabel x1
• Gebruikershandleiding x1
• Stoorkas x1

Image: All components included in the Andeman Jump Starter package, laid out for clear visibility.

2. Veiligheidsmaatreëls

Your safety is paramount. This device incorporates advanced safety features, but proper handling is crucial. The Andeman EP-166 is UL Certified, ensuring it meets stringent safety standards.

2.1. Integrated Safety Protections

The intelligent safety terminals feature 10 advanced protections:

• Oorladingsbeskerming
• Vonkbeskerming
• Omgekeerde laai beskerming
• Omgekeerde polariteitsbeskerming
• Oorstroombeskerming
• Lae temperatuur beskerming
• Oorlaaibeskerming
• Kortsluitingbeskerming
• Oor Voltage Beskerming
• Beskerming teen hoë temperatuur

Beeld: 'n Interne view highlighting the 10 advanced safety protections integrated into the Andeman Jump Starter for secure operation.

2.2. Omgewingsoorwegings

• Temperatuurreeks: The device is engineered to operate in extreme temperatures, from -20°C (-4°F) to 60°C (140°F).
• Waterdigte gradering: With an IP65 waterproof rating, the unit is resistant to rain and splashes. Avoid submerging the device in water.
• Duursaamheid: The design is drop-proof and sand-proof for enhanced durability in various environments.

3. Opstelling

3.1. Laai die Jump Starter

Before initial use, fully charge the jump starter. It features Type-C 3.0A Quick Charging technology, allowing a full charge from 0% to 100% in approximately 1.8 hours. Each complete charge provides up to 80 jump-starts.

• Connect the provided Type-C charging cable to the jump starter's input port.
• Koppel die ander kant van die kabel aan 'n geskikte USB-kragadapter (nie ingesluit nie).
• Die LED-skerm sal die laaivordering wys.

Image: The jump starter being fast-charged via its Type-C port inside a vehicle, showing its quick recharge capability.

4. Bedryfsinstruksies

4.1. Aansit van 'n Voertuig

1. Maak seker dat die springaansitter voldoende gelaai is.
2. Voeg die slim clamps cable into the jump starter's dedicated port.
3. Koppel die rooi (+) clamp na die positiewe terminaal van die voertuig se battery.
4. Koppel die swart (-) clamp to the negative terminal of the vehicle's battery.
5. Check the indicator light on the smart clamps. A solid green light indicates it's safe to proceed. If it flashes red or beeps, refer to the troubleshooting section.
6. Begin die voertuig se enjin.
7. Once the vehicle starts, remove the smart clamps van die voertuigbattery binne 30 sekondes.
8. Disconnect the smart clamps cable from the jump starter.

Image: The Andeman Jump Starter connected to a car battery, illustrating the ease of use for jump-starting a vehicle.

4.2. Gebruik as 'n kragbank

The 20000mAh capacity allows the jump starter to function as a power bank for various electronic devices.

• Connect your device's charging cable to one of the available USB output ports (USB-A: 2.1A; 5V/9V/12V or USB-B: 3A; 5V/2.1A).
• The dedicated Type-C port can also charge laptops at speeds comparable to their original adapters.
• The LED display will show the remaining battery percentage.

Image: The 20000mAh power bank feature in action, charging a laptop, smartphone, tablet, headphones, and smartwatch.

4.3. Gebruik van die LED-flitslig

The built-in ultra-bright LED flashlight offers three lighting modes:

• Flitslig: For general illumination (e.g., inspecting an engine, changing a tire).
• SOUS: A life-saving signal light for emergencies.
• strobe: A traffic warning light to alert oncoming traffic.

To activate and cycle through the modes, press the dedicated flashlight button on the unit.

Image: Illustration of the three versatile LED lighting modes: standard flashlight, SOS signal, and strobe, useful for various emergencies.

5. Onderhoud

5.1. Laai en berging

• Recharge the jump starter every 3-6 months if it is not in regular use to maintain battery health.
• Store the device in its protective storage box in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Probleemoplossing

Die slim clamps provide visual and audible feedback to help diagnose common issues:

7. Spesifikasies

8. Amptelike produkvideo's

9. Waarborg en Ondersteuning

For detailed warranty information and customer support, please refer to the user manual included in your product package. You may also contact Andeman customer service directly via email: andeman@andeman.com.