1. Inleiding
This manual provides detailed instructions for the safe and effective operation of the OTOFIX TireGO 808 TPMS Programming Tool. The TireGO 808 is designed to assist with various Tire Pressure Monitoring System (TPMS) tasks, including sensor activation, programming, relearning, and diagnostics. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
2. Veiligheidsinligting
Always observe the following safety precautions when using the OTOFIX TireGO 808:
- Moenie die toestel in plofbare atmosfere gebruik nie, soos in die teenwoordigheid van vlambare vloeistowwe, gasse of stof.
- Keep the device dry. Do not expose it to rain or wet conditions.
- Gebruik slegs toebehore wat deur die vervaardiger gespesifiseer word.
- Vermy om die toestel te laat val of dit aan ernstige impak te onderwerp.
- Moenie probeer om die toestel uitmekaar te haal of te wysig nie. Herstelwerk moet slegs deur gemagtigde dienspersoneel uitgevoer word.
- Ensure the vehicle's ignition is off before connecting or disconnecting the OBDII cable, unless instructed otherwise by the device for specific procedures.
3. Produk verbyview
3.1 Pakketinhoud
The OTOFIX TireGO 808 package typically includes:
- OTOFIX TireGO 808 Main Unit
- USB kabel
- Kragadapter
- Vinnige gids
- Dratas
- Main OBDII Cable
3.2 Toestelkenmerke
The OTOFIX TireGO 808 offers a range of features for comprehensive TPMS service:
- TPMS Health Check
- TPMS Programming (for OTOFIX MX-Sensors)
- Sensor Relearn (OBD, Automatic, Stationary)
- Sensor Activation (OE and universal TPMS sensors)
- TPMS Diagnostics & Reset
- Sensor Data Reading (ID, pressure, temperature, battery, position)
- Quick Mode and Advanced Mode for varied user experience
- Read/Clear TPMS Diagnostic Trouble Codes (DTCs)
- Wi-Fi Updating for software and vehicle data
- Key Fob Check (frequency and battery electricity)
- TPMS ECU Unlock (for specific vehicle models like Toyota & Lexus)
Image 3.2.1: The OTOFIX TireGO 808 TPMS Programming Tool with its included accessories, including the main unit, OBDII cable, and carry case.
Image 3.2.2: The OTOFIX TireGO 808 device screen showing various TPMS functions and its capability to serve 315/433 MHz sensors.
4. Opstelling
4.1 Aanvanklike aanskakeling en laai
Connect the device to a power source using the provided USB cable and power adapter. The device will automatically power on or can be powered on by pressing the power button. Ensure the device is sufficiently charged before initial use.
4.2 Wi-Fi-verbinding en sagteware-opdaterings
To ensure optimal performance and access to the latest vehicle data, it is crucial to keep the device's software updated. The TireGO 808 supports Wi-Fi updates.
- From the main menu, navigate to 'My Device' or 'Settings'.
- Select 'Update by Wi-Fi'.
- The device will scan for available Wi-Fi networks. Select your network and enter the password if prompted.
- Once connected, select 'Latest Wi-Fi' or 'Update' to check for and download available software updates.
- Keep the device connected to power during the update process.
Image 4.2.1: Illustration of the one-click Wi-Fi updating process for the OTOFIX TireGO 808, showing steps to connect to Wi-Fi and update software.
5. Bedryfsinstruksies
The OTOFIX TireGO 808 offers two main operational modes: Vinnige modus for basic services and Gevorderde modus for comprehensive TPMS functions.
5.1 Sensor Activation
This function is used to trigger all OE and universal TPMS sensors to read their information.
- Select 'Activate Sensors' from the main menu.
- Kies die voertuigmerk, model en jaar.
- Hold the tool near the tire valve stem.
- Press the 'Trigger' button on the device.
- The device will display sensor information such as ID, pressure, temperature, battery condition, and position.
Image 5.1.1: The OTOFIX TireGO 808 activating a TPMS sensor and displaying key data like sensor ID, tire pressure, temperature, battery, and position.
5.2 MX-Sensor Programming
This function allows you to program OTOFIX MX-Sensors to replace malfunctioning sensors. The tool offers two programming options:
- Outomatiese Skepping: Programs 1-16 MX-Sensors wirelessly within seconds.
- Kopie deur OBD: Copies existing sensor IDs from the vehicle's ECU via the OBDII port, eliminating the need for relearn in many cases.
Let wel: This tool is designed to program OTOFIX MX-Sensors only.
Image 5.2.1: Visual representation of the MX-Sensor programming options: Auto Create and Copy by OBD, with the tool connected to a vehicle.
5.3 Sensor Relearn
After replacing TPMS sensors, a relearn procedure is necessary to link the new sensor IDs to the vehicle's TPMS ECU. The TireGO 808 supports three relearn methods:
- OBD Herleer: Directly writes TPMS sensor IDs to the vehicle's TPMS module via the OBDII port.
- Outomatiese herleer: Requires driving the vehicle for a specified period (e.g., 10 minutes above 19 mph) to complete the relearn process.
- Stasionêre Herleer: Requires placing the vehicle in 'Learn Mode' and following on-screen instructions to match sensors with the car.
Detailed step-by-step guides are provided on the device screen for each method.
Image 5.3.1: The OTOFIX TireGO 808 illustrating the three easy relearn methods: OBD Relearn, Automatic Relearn, and Stationary Relearn.
5.4 TPMS Diagnostiek
The diagnostic function allows for a comprehensive check of the TPMS system.
- Connect the device to the vehicle's OBDII port.
- Select 'TPMS Diagnostics' from the menu.
- The tool will scan the entire TPMS system.
- You can then read and clear TPMS Diagnostic Trouble Codes (DTCs) to identify and resolve issues.
- Review data and print reports for deeper analysis if needed.
Image 5.4.1: The OTOFIX TireGO 808 connected to a vehicle, performing TPMS diagnostics and displaying a low tire pressure warning on the dashboard.
5.5 Tire Type/Pressure Selection
If the TPMS warning light persists due to system configuration faults, this function allows you to set the correct tire type and pressure values.
- Navigate to the 'Tire Type/Pressure Selection' option.
- Follow the on-screen prompts to read the current tire type/pressure.
- Select and save the correct tire type and pressure settings for your vehicle.
- Trigger the sensors to write the new settings to the vehicle's ECU.
Let wel: This function primarily serves American-made vehicles.
Image 5.5.1: The OTOFIX TireGO 808 screen showing the steps for selecting and saving tire type and pressure settings.
5.6 Bykomende kenmerke
The TireGO 808 includes other useful functions:
- Key Fob Test: Checks key frequency and battery electricity.
- TPMS ECU Unlock: For specific Toyota and Lexus models.
- Sensor Data Printing: Allows printing of sensor data via a PC connection.
- History Test Record: Stores previous test results for review.
Beeld 5.6.1: verbyview of additional features of the OTOFIX TireGO 808, including Key Fob Test, TPMS ECU Unlock, Sensor Data Printing, and History Test Record.
6. Onderhoud
6.1 Sagteware-opdaterings
Regularly update the device software via Wi-Fi to ensure compatibility with new vehicle models and TPMS sensors, and to receive performance enhancements. Refer to Section 4.2 for detailed update instructions.
6.2 Skoonmaak
Maak die toestel skoon met 'n sagte, damp cloth. Do not use abrasive cleaners or solvents. Keep the screen free of dust and debris for optimal visibility.
6.3 Berging
Store the device in its protective carry case when not in use. Keep it in a dry environment, away from extreme temperatures and direct sunlight.
7. Probleemoplossing
This section addresses common issues you might encounter with the OTOFIX TireGO 808.
| Kwessie | Moontlike oorsaak | Oplossing |
|---|---|---|
| Toestel skakel nie aan nie | Low battery; Power button not pressed correctly; Device malfunction | Charge the device; Press and hold the power button; Contact support if issue persists. |
| Wi-Fi update fails | Poor Wi-Fi signal; Incorrect password; Server issue | Ensure strong Wi-Fi signal; Verify password; Try again later or contact support. |
| Cannot activate sensor | Tool not close enough to sensor; Sensor faulty; Incorrect vehicle selection | Hold tool within 4 inches of valve stem; Check sensor condition; Verify vehicle make/model/year. |
| Sensor relearn fails | Incorrect relearn procedure; Vehicle not in learn mode; Sensor not programmed | Follow on-screen instructions precisely; Ensure vehicle is in learn mode; Confirm sensors are correctly programmed. |
| Device freezes or is unresponsive | Sagtewarefout; Lae battery | Perform a hard reset (refer to quick guide); Charge the device; Update software. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact OTOFIX customer support.
8. Spesifikasies
Technical specifications for the OTOFIX TireGO 808:
- Model: OTOFIX TSGO 808
- Item gewig: 3.99 pond
- Produk afmetings: 5.12 x 5.12 x 8.66 duim
- Vertoon: 2.8-inch, 320x240 resolution
- Battery: 3.7V 3200mAh (1 AA battery included)
- Verbinding: Wi-Fi, USB
- TPMS Frequencies: 315MHz / 433MHz
- Vervaardiger deelnommer: OTOFIX TSGO 808
- UPC: 850052860462
Image 8.1.1: The OTOFIX TireGO 808 showcasing its hardware specifications, lifetime updating, and customer service commitment.
9. Waarborg en Ondersteuning
OTOFIX is committed to providing reliable products and customer satisfaction.
- Lewenslange gratis opdaterings: The OTOFIX TireGO 808 includes lifetime free software updates to ensure the tool remains current with new vehicle models and TPMS technologies.
- 2-Jaar Onderneming: Specific warranty details are provided with the product documentation. Please refer to the warranty card for terms and conditions.
- Online Response: OTOFIX offers 24/7 online support for technical assistance and inquiries.
For further assistance, please visit the official OTOFIX website or contact their customer support channels as indicated in your product packaging or quick guide.