XPG VALOR AIR PLUS Mid-Tower PC Chassis User Manual

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your XPG VALOR AIR PLUS Mid-Tower PC Chassis. Please read this manual thoroughly before beginning assembly to ensure proper installation and to prevent damage to your components. The XPG VALOR AIR PLUS is designed to accommodate mid- to high-end PC components, offering robust cooling and expandability.

Figure 1: XPG VALOR AIR PLUS Mid-Tower PC Chassis (White) with illuminated ARGB fans.

2. Veiligheidsinligting

• Always disconnect the power supply from the wall outlet before installing or removing any components to prevent electric shock.
• Handle all components with care to avoid damage. Static electricity can harm sensitive electronic parts. Consider using an anti-static wrist strap.
• Hou klein onderdele en verpakkingsmateriaal weg van kinders.
• Verseker behoorlike ventilasie rondom die onderstel om oorverhitting te voorkom.
• Do not attempt to modify the chassis or its components, as this may void your warranty and pose safety risks.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is voordat u met die installasie voortgaan:

• XPG VALOR AIR PLUS Mid-Tower PC Chassis
• Toebehoreboks (skroewe, kabelbinders, afstandhouers, ens.)
• Gebruikershandleiding (hierdie dokument)
• Pre-installed 120mm ARGB Fans (4 units, in select models)

4. Produk verbyview

Familiarize yourself with the various parts of the XPG VALOR AIR PLUS chassis.

4.1 Voorpaneel

Figure 2: Front panel with magnetic mesh design for optimal airflow.

The front panel features a magnetic mesh design, allowing for easy removal and excellent airflow. This design also highlights the pre-installed ARGB fans.

4.2 Boonste I/O-paneel

Figure 3: Top I/O panel with USB ports, audio jacks, and power/reset buttons.

The top I/O panel includes: Power Button, Reset Button, 2x USB 3.2 Type-A ports, Headphone Jack, and Microphone Jack.

4.3 Binne-uitleg

Figure 4: Internal structure highlighting motherboard compatibility and fan locations.

The spacious interior supports various motherboard form factors (Micro ATX, ATX) and offers multiple mounting points for fans and radiators. It features a dedicated PSU shroud for a clean build.

5. Setup and Component Installation

Follow these steps to install your PC components into the XPG VALOR AIR PLUS chassis.

5.1 Voorbereiding

• Gather necessary tools: Phillips head screwdriver, cable ties (included), anti-static wrist strap (recommended).
• Prepare a clean, flat workspace.
• Remove the side panels. Typically, these are secured with thumbscrews at the rear of the chassis.

Figuur 5: Ontplof view demonstrating removable panels and dust filters for easy access and maintenance.

5.2 Moederbord installasie

1. Install the I/O shield into the rear opening of the chassis (if not pre-attached to your motherboard).
2. Align the motherboard with the pre-installed standoffs. Ensure the screw holes on the motherboard match the standoffs.
3. Bevestig die moederbord met die toepaslike skroewe uit die bykomstigheidsboks.

5.3 Installasie van kragtoevoereenheid (PSU).

1. Locate the PSU mounting area at the bottom rear of the chassis.
2. Slide the PSU into position from the rear.
3. Secure the PSU with screws from the accessory box.

5.4 Installasie van stoorskyf

The chassis supports 2.5" SSDs and 3.5" HDDs. Refer to the chassis interior for specific mounting locations (e.g., behind the motherboard tray, drive cages).

• For 2.5" SSDs: Secure with screws to designated mounting points.
• For 3.5" HDDs: Slide into drive cages and secure with screws or tool-less mechanisms.

5.5 Graphics Card (GPU) and Expansion Card Installation

1. Remove the necessary PCIe slot covers from the rear of the chassis.
2. Insert the graphics card or other expansion card into the appropriate PCIe slot on the motherboard.
3. Secure the card with the provided screw or retention clip.

5.6 Kabelbestuur

Figure 6: Rear interior view demonstrating cable routing channels and tie-down points.

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics. Use the included cable ties to secure bundles.

5.7 Verbinding van die voorpaneel-I/O

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 3.2, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

6. Bedryfsinstruksies

6.1 Eerste Aanskakeling

1. Ensure all components are securely installed and all necessary cables are connected.
2. Close and secure the side panels.
3. Connect your monitor, keyboard, mouse, and power cable to the PSU.
4. Draai die kragskakelaar op die PSU na die 'AAN'-posisie.
5. Press the Power Button on the top I/O panel of the chassis.

6.2 ARGB Fan Control

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (if connected to a compatible header) or through a dedicated ARGB controller (if included with your specific model or purchased separately). Refer to your motherboard manual or ARGB controller instructions for detailed customization options.

7. Onderhoud

Gereelde onderhoud help om optimale werkverrigting en lang lewensduur van jou rekenaarkomponente te verseker.

7.1 Cleaning the Chassis

• Gebruik 'n sagte, damp cloth to wipe down exterior surfaces. Avoid abrasive cleaners.
• For interior cleaning, use compressed air to remove dust from components and fan blades. Ensure the system is powered off and unplugged before cleaning.

7.2 Onderhoud van die stoffilter

The XPG VALOR AIR PLUS features removable dust filters (e.g., front, top, bottom). Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the chassis.

1. Gently remove the dust filters.
2. Clean them with water and mild soap, or use a vacuum cleaner/compressed air.
3. Maak seker dat filters heeltemal droog is voordat dit weer geïnstalleer word.

8. Probleemoplossing

Hierdie afdeling spreek algemene probleme aan wat jy mag teëkom.

8.1 Stelsel skakel nie aan nie

• Gaan kragverbindings na: Ensure the PSU is properly connected to the wall outlet and the PSU's power switch is ON. Verify all internal power cables (24-pin ATX, CPU, GPU, etc.) are securely connected to the motherboard and components.
• Voorpaneelverbindings: Confirm that the Power SW cable from the chassis is correctly connected to the motherboard's front panel header.
• PSU Functionality: If possible, test the PSU with another system or use a PSU tester.

8.2 Waaiers Draai Nie / ARGB Lig Nie Aan

• Fan krag: Ensure fan power cables are connected to appropriate headers on the motherboard or a fan controller.
• ARGB-verbindings: Verify ARGB cables are connected to a compatible 3-pin 5V ARGB header on the motherboard or an ARGB controller. (Note: Do not connect 5V ARGB to 12V RGB headers).
• Software/Controller: Check your motherboard's BIOS/UEFI settings or ARGB software for fan speed and lighting control.

8.3 Swak lugvloei / hoë temperature

• Stoffilters: Clean all dust filters regularly.
• Waaieroriëntasie: Ensure fans are oriented correctly for optimal intake and exhaust airflow.
• Kabelbestuur: Improve cable management to reduce obstructions to airflow.

9. Spesifikasies

Let wel: Spesifikasies is onderhewig aan verandering sonder vooraf kennisgewing.

10. Waarborg en Ondersteuning

XPG products are backed by a limited warranty. For detailed warranty terms and conditions, please refer to the official XPG webwebwerf of die waarborgkaart wat by u produk ingesluit is.

Kliënte ondersteuning

If you encounter any issues or have questions regarding your XPG VALOR AIR PLUS chassis, please contact XPG customer support through their official website. Have your product model number (VALORAIRPLUSMTA-WHCWW) and proof of purchase ready when contacting support.

Besoek die XPG Store on Amazon vir meer inligting en produkte.