ARPHA D280W-H300 Keyless Entry Door Deadbolt with Handle Set User Manual

Inleiding

This manual provides detailed instructions for the installation, setup, and operation of your ARPHA D280W-H300 Keyless Entry Door Deadbolt with Handle Set. This smart lock offers multiple unlocking methods including fingerprint, passcode, mobile app control, and traditional key access, enhancing convenience and security for your home.

Beeld: Oorview of the ARPHA D280W-H300 smart lock components and app interface.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• Exterior Keypad Unit
• Binne-eenheid
• Door Handle Set (Lever handles and escutcheons)
• Doodbout-grendel
• Montageplaat
• Monteringskroewe (verskillende groottes)
• Stakplaat
• Fisiese sleutels
• Installasie sjabloon

Opstelling

1. Installasie

Follow these steps to physically install the lock on your door. Ensure your door thickness is between 1-3/8" to 2-1/8" (35mm - 55mm) and the backset is 2-3/8" (60mm) or 2-3/4" (70mm).

Image: Door and lock dimensions for compatibility check.

1. Berei die deur voor: Use the provided template to mark and drill holes if necessary.
2. Installeer die grendel: Insert the deadbolt latch into the door edge. Ensure the word "UP" on the deadbolt faces upwards. Secure with two 25mm screws.
3. Installeer eksterne sleutelbord: Pass the connection wire through the bottom-right hole of the mounting plate. Align the protruding position of the latch with the concave position of the lock body and insert the exterior keypad.
4. Installeer Montageplaat: Secure the mounting plate to the door using two screws, ensuring the wire passes through the correct opening.
5. Connect Interior Unit: Connect the power and communication cables from the exterior unit to the interior unit.
6. Mount Interior Unit: Attach the interior unit to the mounting plate, ensuring all wires are tucked away. Secure with screws.
7. Installeer batterye: Insert 8 AA batteries into the interior unit. The lock will automatically identify the unlocking direction.

2. Initial Setup (Administrator & User Management)

After installation, set up the administrator password and add user credentials.

1. Set Administrator Password: Briefly press the setup button (located on the interior unit, under the battery cover). Enter a 6-9 digit password twice, then press the unlock button to confirm.
2. Add User Passwords: Briefly press the setup button, enter the administrator password, and press the unlock button. Then, press '1' to add a password. Enter a 6-9 digit password twice, then press the unlock button to confirm.
3. Add User Fingerprints: Briefly press the setup button, enter the administrator password, and press the unlock button. Then, press '2' to add a fingerprint. Place your finger on the sensor four times as prompted.

3. App Pairing & Network Configuration

The ARPHA D280W-H300 supports Wi-Fi connectivity for remote control via a mobile application. Ensure your Wi-Fi network is 2.4G.

1. Laai die toepassing af: Soek vir the ARPHA app in your device's app store.
2. Begin saambinding: Briefly press the setup button, enter the administrator password, and press the unlock button. Then, press '5' to enter network allocation mode.
3. Pair Device in App: Open the ARPHA app, ensure Bluetooth is enabled. The app should automatically detect the lock. Follow the on-screen prompts to add the device and enter your 2.4G Wi-Fi credentials.

Bedryf

Ontsluitmetodes

Your ARPHA smart lock offers five ways to unlock:

• Vingerafdruk: Place your registered finger on the fingerprint sensor. The lock will unlock in approximately 0.3 seconds.
• Wagkode: Enter your registered 6-9 digit passcode on the keypad, then press the unlock button.
• Mobiele toepassing: Use the ARPHA app to remotely unlock the door.
• Stembeheer (Alexa): If integrated with Alexa, use voice commands to unlock.
• Fisiese Sleutel: In case of emergency or battery depletion, use the provided physical key.

Image: Visual representation of the multiple unlocking options available.

Gevorderde kenmerke

• Outo-sluit: The lock can be configured to automatically lock after a set period. To adjust this setting, briefly press the setup button, enter the administrator password, press the unlock button, then press '4' for settings, and '1' for auto-lock. You can set the auto-lock delay from 5 to 900 seconds.

Video: Guide on how to enable and configure the auto-lock feature.
• Anti-Peep Passcode: To prevent others from observing your passcode, you can enter random digits before or after your actual passcode. The lock will still recognize the correct sequence.


Image: Explanation of the anti-peep passcode function.

• Temporary Passwords: Generate temporary passwords via the mobile app for guests or service providers.


Beeld: Bvample of using a temporary password for access.

• Volume instelling: Adjust the voice prompt volume. Briefly press the setup button, enter the administrator password, press the unlock button, then press '4' for settings, and '2' for voice prompt volume. Choose from silent (1), low (2), medium (3), or high (4).

Video: Instructions for adjusting the volume of the lock's voice prompts.

Onderhoud

Battery vervanging

The lock uses 8 AA batteries. When the battery level is low, you will receive a reminder. Replace all 8 batteries promptly to ensure continuous operation.

Image: Battery compartment and emergency USB-C port.

• Noodkrag: If batteries deplete completely, you can use a USB-C power bank to temporarily power the lock via the hidden USB-C port on the exterior unit.

Probleemoplossing

• Programverbindingskwessies: Ensure your phone's Bluetooth is on and your Wi-Fi network is 2.4G. If issues persist, try re-pairing the device as described in the "App Pairing & Network Configuration" section.
• Forgotten Administrator Password: If you forget the administrator password, you can perform a factory reset. Briefly press the setup button for 7 seconds, then press the unlock button to confirm. This will reset all settings and user data.

Video: Instructions for performing a factory reset on the smart lock.

• Verification Failed (Password/Fingerprint): Ensure you are entering the correct password or placing your finger correctly on the sensor. If the administrator password needs to be changed, follow the modification steps.

Video: Guide on how to modify the administrator password.
• Lae battery waarskuwing: Replace batteries immediately when a low battery alert is received. Use the USB-C port for emergency power if needed.

Spesifikasies

Waarborg en Ondersteuning

ARPHA is committed to providing high-quality products and excellent customer service.

• Waarborg: Hierdie produk kom met 'n 3-jaar waarborg.
• Kliëntediens: For any questions or assistance, contact our 7x24 online customer service. Our professional after-sales team aims to respond within 2 hours.