JENABOM 3.6V Cordless Electric Screwdriver User Manual

1. Veiligheidsinstruksies

Please read and understand all safety warnings and instructions before operating this electric screwdriver. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Werksarea veiligheid: Hou jou werkarea skoon en goed belig. Oorvol of donker areas nooi ongelukke uit. Moenie elektriese gereedskap in plofbare atmosfere gebruik nie, soos in die teenwoordigheid van vlambare vloeistowwe, gasse of stof.
• Elektriese veiligheid: Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Persoonlike veiligheid: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection.
• Gereedskap gebruik en versorging: Moenie die kraggereedskap forseer nie. Gebruik die korrekte kraggereedskap vir jou toepassing. Die korrekte kraggereedskap sal die werk beter en veiliger doen teen die tempo waarvoor dit ontwerp is. Ontkoppel die batterypak van die kraggereedskap voordat jy enige aanpassings maak, bykomstighede verander of kraggereedskap bêre.

2. Pakketinhoud

Verifieer dat alle items in jou pakket teenwoordig is:

• JENABOM 3.6V Cordless Electric Screwdriver
• USB-laaikabel
• 105-piece Accessory Set (various screwdriver bits, drills, screws, extension rods, magnetizer)
• Opbergkas

This image displays the JENABOM 3.6V Cordless Electric Screwdriver, its USB charging cable, and the comprehensive 105-piece accessory kit, including various screwdriver bits, sockets, and a storage case.

The complete JENABOM electric screwdriver kit, including the tool and all 105 accessories, neatly stored in its dedicated carrying case for organization and portability.

3. Produk verbyview

Maak jouself vertroud met die komponente van jou elektriese skroewedraaier:

• Seskant-spantang: Accepts standard 1/4 inch (6.35mm) bits.
• LED Werklig: Verlig die werkarea.
• Forward/Reverse Buttons: Controls the rotation direction.
• Charging and Torque Gear Indicator: Displays battery level and selected torque setting.
• USB-laaipoort: Vir die herlaai van die interne battery.
• Anti-slip Handle: Ergonomies ontwerp vir gemaklike greep.

This diagram illustrates the main features of the screwdriver, including the USB charging port, the 1/4 inch hex collet for standard bits, the LED indicator for charge and torque settings, and the forward/reverse control buttons.

4. Opstelling

4.1. Charging the Screwdriver

Before first use, fully charge the screwdriver. The built-in 1300mAh lithium-ion battery typically requires 3-5 hours for a full charge.

1. Vind die USB-laaipoort op die skroewedraaier.
2. Connect the provided USB charging cable to the screwdriver's port.
3. Connect the other end of the USB cable to a compatible USB power source (e.g., computer, power bank, wall adapter).
4. The charging indicator lights will show the charging status. Once fully charged, the indicator will show a full battery.

The image shows the JENABOM electric screwdriver connected to a laptop via its USB cable for charging, demonstrating its convenient and versatile charging options.

4.2. Inserting Screwdriver Bits

The screwdriver features a magnetic hex collet for easy bit changes.

1. Select the appropriate 1/4 inch hex bit for your task.
2. Push the bit firmly into the hex collet until it is securely seated. The magnetic design will hold the bit in place.
3. To remove, simply pull the bit straight out.

This image illustrates the magnetic design of the screwdriver's chuck, allowing for quick and easy insertion and removal of screwdriver bits, both directly and with an extension pole.

5. Operasie

5.1. Aanskakel/Afskakel en Rigtingbeheer

The screwdriver is activated by pressing and holding the appropriate button.

1. Vorentoe rotasie: Press and hold the forward button (usually indicated by an arrow pointing right or up) for 1 second to start driving screws.
2. Omgekeerde rotasie: Press and hold the reverse button (usually indicated by an arrow pointing left or down) for 1 second to remove screws.
3. Laat die knoppie los om die skroewedraaier te stop.

This image illustrates the forward and reverse control buttons on the screwdriver, indicating that a 1-second press is required to initiate operation and switch between modes.

5.2. Wringkragaanpassing

The screwdriver features four adjustable torque settings, allowing you to match the power to the task and prevent over-tightening or damage.

1. The torque setting can be adjusted using the dedicated torque adjustment button or by cycling through the settings with the main power button (refer to the indicator lights).
2. Available torque levels range from 2.5 N.m to 5 N.m.
3. Select a lower torque for delicate tasks (e.g., electronics, soft materials) and a higher torque for more demanding applications (e.g., furniture assembly, harder materials).
4. When the set torque is reached, the mechanical clutch will disengage, preventing further tightening.

This graphic provides essential technical data for the screwdriver, detailing its 3.6V operating voltage, 1300mAh battery capacity, 200 RPM no-load speed, and the adjustable torque range from 2.5 N.m to 5 N.m across four settings.

This image demonstrates the functionality of the adjustable 4-level torque system, showing how it prevents damage to screws or materials by disengaging the clutch when the set torque is reached.

5.3. LED Werkslig

The integrated LED work light automatically activates when the screwdriver is in operation, providing illumination for dark or confined spaces.

An image depicting the screwdriver in operation, with its built-in LED work light actively illuminating the work area, enhancing visibility in low-light conditions.

This image highlights the effectiveness of the LED working light, demonstrating how it provides crucial illumination in dark environments for improved visibility during tasks.

6. Onderhoud

Regular maintenance ensures optimal performance and extends the life of your screwdriver.

• Skoonmaak: Hou die gereedskap se ventilasie-openinge skoon om oorverhitting te voorkom. Gebruik 'n sagte, damp lap om die buitekant skoon te maak. Moenie harde chemikalieë of skuurmiddels gebruik nie.
• Bitversorging: Store screwdriver bits in the provided case to prevent loss and damage. Replace worn or damaged bits to ensure efficient and safe operation.
• Berging: Store the screwdriver and accessories in a dry, secure location, away from direct sunlight and extreme temperatures.

7. Probleemoplossing

Indien u probleme ondervind, verwys na die volgende algemene probleme en oplossings:

8. Spesifikasies

Key technical specifications for the JENABOM 3.6V Cordless Electric Screwdriver:

9. Waarborg en Ondersteuning

For warranty information or technical support, please contact JENABOM customer service. Details can typically be found on the product packaging or the official JENABOM webwebwerf.

If you are not satisfied with your purchase, please feel free to contact us. JENABOM will reply to you within 24 hours.