KERDE P30B Smart Bidet Toilet Seat User Manual

Inleiding

Thank you for choosing the KERDE P30B Smart Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet seat. Please read it thoroughly before use and retain it for future reference.

Belangrike veiligheidsinligting

Om veilige werking te verseker en skade te voorkom, neem die volgende voorsorgmaatreëls:

• The product must be connected to a domestic water supply.
• The electrical connection requires 120V voltage and a 3-hole grounded socket.
• Moenie die produk in water dompel of water direk op die elektriese komponente spuit nie.
• Maak seker dat alle waterverbindings stewig is om lekkasies te voorkom.
• Children and individuals with reduced physical, sensory, or mental capabilities should be supervised or instructed on safe use.
• Ontkoppel die eenheid voordat u skoonmaak of enige onderhoud uitvoer.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• KERDE P30B Bidet Toilet Seat
• Draadlose afstandbeheer
• Monteer hardeware
• Watertoevoerslang
• Gebruikershandleiding

Produk Kenmerke

The KERDE P30B Smart Bidet Toilet Seat offers a range of features designed for comfort and hygiene:

Dubbele beheeropsies

Operate your bidet seat with ultimate convenience using either the full-function side panel or the wireless remote control. Both provide access to all features.

The KERDE P30B Smart Bidet Toilet Seat, showcasing its sleek design and dual control options: a wireless remote and an integrated side panel.

A close-up of the dual control system, featuring both the comprehensive wireless remote and the intuitive side panel, detailing all available functions and settings.

Warm Water Wash & Adjustable Nozzle

Experience a refreshing clean with warm water wash, offering adjustable temperature and pressure settings. The self-cleaning stainless steel nozzle ensures maximum hygiene with front and rear wash modes, suitable for all users.

This diagram details the various wash modes available, including rear, female, and oscillating options, along with the adjustable nozzle position and self-cleaning feature for enhanced hygiene.

Heated Seat & Warm Air Drying

Stay comfortable year-round with the heated seat feature, offering multiple temperature levels. After cleansing, the warm air dryer provides a hands-free drying experience, reducing the need for toilet paper.

'n verbyview of the smart features, highlighting the warm air dryer, heated seat, and self-cleaning nozzle, all designed for comfort and cleanliness.

LED naglig

The soft LED night light ensures safe and convenient nighttime use. Its gentle illumination guides you without disrupting sleep.

Energy-Saving & Quiet Close Design

Built with energy-saving technology, this toilet seat minimizes power consumption. The quiet close lid prevents slamming noises, adding a touch of elegance to your bathroom.

Installasiegids

Follow these steps to install your KERDE P30B Bidet Toilet Seat. It is recommended to watch the provided installation videos for visual guidance.

1. Confirm Toilet Size

Before installation, ensure your toilet dimensions are compatible with the bidet seat. Refer to the diagram below for required measurements.

Important measurements for ensuring compatibility with your existing toilet, illustrating the required length and width for proper fitment.

2. Berei voor vir installasie

• Shut off the water supply to your toilet at the wall valve.
• Spoel die toilet om die tenk te dreineer.
• Ontkoppel die bestaande watertoevoerslang van die toilettenk.
• Remove your old toilet seat and lid.

3. Mount the Bidet Seat

• Place the mounting plate over the toilet bowl holes.
• Insert the rubber expansion bolts into the holes and secure them with the provided screws.
• Slide the bidet seat onto the mounting plate until it clicks into place.

4. Sluit watertoevoer aan

• Install the T-valve (water splitter) between the toilet tank fill valve and the water supply hose. Ensure the rubber washer is correctly seated to prevent leaks.
• Connect one end of the bidet water supply hose to the T-valve and the other end to the bidet seat's water inlet. Ensure a tight connection.
• Slowly open the water supply valve to check for leaks.

5. Verbind krag

• Steek die bidetstoel se kragkabel in 'n geaarde 120V-elektriese aansluiting.

Installasievideo's

Bedieningsgids

The KERDE P30B bidet seat can be operated using either the integrated side panel or the wireless remote control. Ensure you are seated on the bidet seat for functions to activate, as it features a seat sensor.

Basiese funksies

• Krag: Druk die Power-knoppie om die eenheid aan of af te skakel.
• Agterwas: Activates the rear cleansing function.
• Vroulike Was: Activates the gentle front cleansing function.
• Droog: Initiates the warm air drying cycle.
• stop: Stops any active function.

Verstelbare instellings

• Water temperatuur: Adjust the water temperature (Low, Medium, High) for washing.
• Sitplek temperatuur: Adjust the heated seat temperature (Low, Medium, High) for comfort.
• Waterdruk: Increase or decrease the water spray intensity.
• Spuitstukposisie: Adjust the nozzle forward or backward for optimal cleansing.
• Oscillate Wash: Some wash modes may offer an oscillating feature for broader cleaning.

Bykomende kenmerke

• LED naglig: Provides soft illumination for nighttime use.
• Energiebesparing: Aktiveer 'n energiebesparingsmodus om kragverbruik te verminder.
• Selfreinigende spuitstuk: Die spuitstuk maak homself outomaties skoon voor en na elke gebruik.
• Auto Function: Cycles through a preset sequence of wash and dry functions.

Sorg en Onderhoud

Regular cleaning and maintenance will ensure the longevity and optimal performance of your bidet seat.

Maak die Bidet-sitplek skoon

• Ontkoppel die bidetstoel uit die stopcontact voordat u dit skoonmaak.
• Gebruik 'n sagte, damp cloth and a mild, non-abrasive cleaner to wipe down the exterior surfaces.
• Do not use harsh chemicals, abrasive pads, or benzene-based cleaners, as these can damage the surface.
• For the nozzle, the self-cleaning function is usually sufficient. If manual cleaning is needed, gently pull out the nozzle and wipe it with a soft cloth.

Langtermyn berging

• If the bidet seat will not be used for an extended period, drain the water from the unit and disconnect the power.
• Store in a dry, temperate environment.

Probleemoplossing

If you encounter issues with your KERDE P30B bidet seat, refer to the following common problems and solutions:

• Geen krag: Check if the power cord is securely plugged into a grounded outlet. Ensure the outlet is functional.
• Geen watersproei: Verify that the water supply valve is fully open and that the T-valve is correctly installed. Ensure the seat sensor is activated by sitting on the seat.
• Water Temperature Not Changing: Allow a few moments for the water heater to adjust. Ensure the water temperature setting is correctly selected.
• Seat Not Heating: Confirm the seat temperature setting is active. Ensure the seat sensor is engaged.
• Afstandbeheer reageer nie: Check the remote control batteries. Ensure there are no obstructions between the remote and the bidet seat.

Indien die probleem voortduur nadat u hierdie oplossings probeer het, kontak asseblief kliëntediens.

Tegniese spesifikasies

Waarborg en kliëntediens

For warranty information, specific terms and conditions, or to contact customer support, please refer to the official documentation included with your product or visit the KERDE webwerf. Hou jou aankoopkwitansie vir waarborgeise.