Topaz RTL4-SQ-7W-CS-WH 4-inch Performance LED Recessed Retrofit Downlight Instruction Manual

1. Belangrike veiligheidsinligting

Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• WAARSKUWING: Risiko van elektriese skok. Ontkoppel krag by die lont of stroombreker voor installering of diens.
• WAARSKUWING: Risk of fire. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
• Hierdie produk moet in ooreenstemming met die toepaslike installasiekode geïnstalleer word deur 'n persoon wat vertroud is met die konstruksie en werking van die produk en die betrokke gevare.
• Geskik vir nat plekke.
• Moenie enige oop gate in 'n omhulsel van bedrading of elektriese komponente maak of verander tydens die installering van die kit nie.
• Om bedradingskade of skuur te voorkom, moenie bedrading aan rande van plaatmetaal of ander skerp voorwerpe blootstel nie.

2. Produk verbyview

The Topaz RTL4-SQ-7W-CS-WH is a 4-inch square LED recessed retrofit downlight designed for both new construction and existing recessed housings. It features a CCT (Correlated Color Temperature) selectable switch, allowing users to choose from five color temperature options. This 7-watt LED fixture provides 90 CRI quality lighting and is dimmable.

Sleutel kenmerke:

• Retrofit trim for 4-inch recessed housings.
• CCT field selectable switch to adjust between 5 color temperatures (2700K, 3000K, 3500K, 4000K, 5000K).
• Square baffle trim with a durable white finish.
• Dimmable LED functionality.
• Hoë kleurweergawe-indeks (CRI) van 90.
• Geskik vir nat plekke.

3. Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• 1 x Topaz RTL4-SQ-7W-CS-WH LED Recessed Downlight
• 1 x E26 Adapter
• Vinnige verbindings

Image 1: The Topaz 4-inch square LED downlight shown with its included E26 adapter, ready for installation.

4. Opstelling en installering

4.1 Voorinstallasie

Before starting, ensure you have the following tools and materials:

• Skroewedraaier
• Draadstroppers (indien nodig)
• Veiligheidsbril
• Handskoene
• Existing 4-inch recessed housing

4.2 Installasiestappe

1. Skakel krag af: Locate the circuit breaker or fuse box and turn off the power supply to the recessed lighting fixture you are replacing or installing. Verify power is off using a voltage toetser.
2. Remove Existing Trim (if applicable): Carefully remove the existing bulb and trim from the recessed housing.
3. Connect E26 Adapter: Screw the E26 adapter into the existing E26 socket within the recessed housing.
4. Connect Quick Connects: Plug the quick connect cable from the LED downlight into the quick connect cable from the E26 adapter. Ensure a secure connection.
5. Select CCT (Color Temperature): Before inserting the downlight into the housing, locate the CCT selectable switch on the back of the fixture. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.


Image 2: The back of the Topaz LED downlight showing the CCT selection switch and the connected E26 adapter. The friction clips are also visible.

6. Voeg afwaartse lig in: Gently push the LED downlight into the 4-inch recessed housing. The friction clips on the sides of the downlight will secure it in place. Ensure the trim is flush with the ceiling.
7. Herstel krag: Skakel die krag weer aan by die stroombreker of sekeringboks.
8. Toets: Skakel die ligskakelaar aan om behoorlike werking te verifieer.

5. Bedryfsinstruksies

5.1 CCT Color Selection

The Topaz RTL4-SQ-7W-CS-WH features a CCT selectable switch located on the back of the fixture. This switch allows you to choose from five different color temperatures to suit your preference or application:

• 2700K: Warm White (similar to incandescent)
• 3000K: Sag wit
• 3500K: Neutraal Wit
• 4000K: Koel Wit
• 5000K: Daglig

To change the CCT, you must first remove the fixture from the recessed housing and then slide the switch to the desired setting. Reinstall the fixture after selection.

Beeld 3: 'n Nabyskoot view of the CCT selection switch on the back of the downlight, showing the five selectable color temperature options.

5.2 Dimfunksie

This LED downlight is dimmable. For optimal performance, use with compatible LED-rated dimmers. Refer to your dimmer's instructions for proper installation and operation. Ensure the dimmer is suitable for LED loads.

6. Onderhoud

The Topaz RTL4-SQ-7W-CS-WH LED downlight requires minimal maintenance.

• Skoonmaak: Maak seker dat die krag afgeskakel is voor skoonmaak. Vee die toestel af met 'n sagte, droë of effens droë lap.amp lap. Moenie harde chemikalieë, skuurmiddels of oplosmiddels gebruik nie, aangesien dit die afwerking of elektriese komponente kan beskadig.
• Geen gebruikerdiensbare onderdele nie: There are no user-serviceable parts inside this fixture. Do not attempt to disassemble the unit.

7. Probleemoplossing

If the fixture does not operate correctly, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, contact a qualified electrician or the manufacturer's support.

8. Spesifikasies

9. Waarborg en Ondersteuning

This product is manufactured by Topaz and is subject to their standard warranty terms and conditions. Please refer to the official Topaz website or contact their customer service for detailed warranty information.

For technical assistance, troubleshooting, or warranty claims, please contact Topaz customer support directly. Contact information can typically be found on the manufacturer's webwebwerf of produkverpakking.