SEBSON IR_ES_EA

SEBSON Recessed Ceiling Motion Detector (IR_ES_EA) - Anthracite

Instruksie Handleiding

1. Inleiding

Thank you for choosing the SEBSON Recessed Ceiling Motion Detector. This device is designed for indoor use to automatically control lighting based on motion and ambient light levels. Please read this manual carefully before installation and operation to ensure proper function and safety.

Voorkant view of the SEBSON recessed ceiling motion detector with key specifications overlaid: 8m/360° detection, up to 1000W LED, IP20, 10sec-30min timer, 3-2000 LUX, 230V.
Figuur 1: oorview of the motion detector and its main features.

2. Veiligheidsinstruksies

  • Installasie moet deur 'n gekwalifiseerde elektrisiën uitgevoer word in ooreenstemming met plaaslike bedradingsregulasies.
  • Disconnect power at the main circuit breaker before installation or maintenance.
  • Do not exceed the maximum load capacity of the detector (2000W for incandescent, 1000W for LED).
  • Hierdie produk is slegs ontwerp vir binnenshuise gebruik. Vermy blootstelling aan vog of uiterste temperature.
  • Verseker behoorlike ventilasie rondom die toestel.

3. Produkkenmerke

  • Indoor motion detector for recessed ceiling mounting.
  • Wide detection range of 8 meters and 360 degrees.
  • Adjustable operating duration from 10 seconds to 30 minutes.
  • Adjustable ambient light sensitivity from 3 to 2000 lux.
  • Compatible with LED lighting (max 1000W) and incandescent bulbs (max 2000W).
  • 3-wire connection for reliable operation.

4. Pakketinhoud

  • 1x SEBSON Recessed Ceiling Motion Detector (Anthracite)
  • 1x handleiding

5. Installasie

Belangrik: Ensure power is disconnected at the main circuit breaker before starting installation.

  1. Prepare a mounting hole in the ceiling with a diameter of 63-66 mm. Ensure there is sufficient depth (minimum 45 mm) for the detector.
  2. Connect the wiring according to the diagram below. The detector requires a 3-wire connection (Live, Neutral, Switched Live).
  3. Insert the detector into the prepared hole. The spring clips will secure it in place.
  4. Restore power and test the functionality.

5.1. Produk verbyview en afmetings

Voorkant view of the SEBSON recessed ceiling motion detector in anthracite color.
Figuur 2: Voorkant view of the motion detector. This image shows the anthracite-colored circular housing with the central infrared sensor dome.
Technical drawing showing the dimensions of the motion detector: 75mm diameter, 42mm height, 60mm internal width, 34mm internal height, 31mm spring length, 3mm bezel thickness.
Figure 3: Detailed dimensions of the motion detector. The overall diameter is 75mm, and the height is 42mm. The mounting hole diameter should be between 63-66mm.
Kant view diagram illustrating the recessed installation, showing a minimum installation depth of 45mm and a ceiling thickness of up to 20mm.
Figure 4: Installation depth requirement. A minimum depth of 45mm is needed for proper recessed mounting.
Agter view of the motion detector showing the wiring terminal block and spring clips.
Figuur 5: Agter view showing the wiring terminal. This is where the Live, Neutral, and Switched Live wires are connected.

6. Bediening en Aanpassings

The motion detector features two adjustable dials on the back for 'TIME' (duration) and 'LUX' (light sensitivity).

Agter view of the motion detector showing the 'TIME' and 'LUX' adjustment dials. The TIME dial ranges from 10s to 30min, and the LUX dial from 3 to 2000 lux.
Figure 6: Adjustment dials for TIME and LUX settings.

6.1. TIME Adjustment

The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. Rotate the dial to set the desired duration:

  • 10s: Minimum duration (10 seconds).
  • 30 min: Maximum duration (30 minutes).

6.2. LUX Adjustment

The 'LUX' dial determines the ambient light level at which the detector will activate. This allows the light to only turn on when it's dark enough.

  • 3: Activates only in very dark conditions (e.g., night).
  • 2000: Activates in all light conditions (day and night).

To set the LUX level, turn the dial to the sun symbol (2000 lux) for testing during daylight. Once satisfied with the detection, adjust the dial towards the moon symbol (3 lux) to the desired ambient light level for automatic operation.

6.3. Opsporingsreeks

Diagram showing the 360-degree detection area of the motion detector, with a maximum range of 8 meters and an installation height between 1.8m and 4m.
Figure 7: Detection range and angle. The detector covers a 360-degree area with a maximum range of 8 meters when installed at a height between 1.8m and 4m.

The detector has a 360° detection angle and a maximum range of 8 meters. Optimal installation height is between 1.8m and 4m. Avoid installing near heat sources, direct sunlight, or areas with significant air movement (e.g., air conditioning vents) to prevent false triggers.

7. Onderhoud

The SEBSON motion detector requires minimal maintenance. Ensure the sensor lens is kept clean and free from dust or obstructions. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

8. Probleemoplossing

Probleem Moontlike oorsaak Oplossing
Lig skakel nie aan nie.
  • Geen kragtoevoer.
  • LUX setting too low (too dark).
  • Geen beweging binne bereik bespeur nie.
  • Foutiewe bedrading.
  • Check circuit breaker and connections.
  • Adjust LUX dial towards the sun symbol.
  • Ensure motion occurs within the detection zone.
  • Verifieer bedradingsverbindings.
Lig bly konstant aan.
  • Continuous motion in detection zone.
  • TIME setting too long.
  • Wiring error (e.g., switched live permanently connected).
  • Clear detection zone of constant movement.
  • Adjust TIME dial to a shorter duration.
  • Check wiring for correct connections.
Light turns on without apparent motion.
  • Heat sources (e.g., heater, direct sunlight).
  • Air currents (e.g., open window, AC vent).
  • Small animals.
  • Relocate detector or remove interfering objects.
  • Ensure stable environment.
  • Adjust sensitivity if possible (this model does not have explicit sensitivity adjustment, but careful placement can help).

9. Spesifikasies

Handelsmerk SEBSON
Modelnommer IR_ES_EA
Kleur Antrasiet
Afmetings (L x B x H) 7.5 x 7.5 x 7.5 cm
Gewig 110 gram
Montage tipe Ingeboude (plafon)
Bevestigingsdeursnee 63-66 mm
Kragbron AC krag
Maksimum lading (gloeiend) 2000 W
Max Load (LED/Energy Saving) 1000 W
Opsporingsreeks 8 XNUMX meter
Bespeuringshoek 360°
Operating Duration (TIME) 10 seconds - 30 minutes
Ambient Light Sensitivity (LUX) 3 - 2000 lux
Versoenbare toestelle Basic lighting controls
Aanbevole gebruike Residential security, commercial security, automation, energy management
Land van oorsprong China

10. Waarborg en Ondersteuning

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON webwebwerf. Bewaar u bewys van aankoop vir waarborgeise.

© 2026 SEBSON. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.