PRUVEEO D90-4CH Dash Cam and Hardwire Kit User Manual

1. Inleiding

This manual provides comprehensive instructions for the installation, operation, and maintenance of your PRUVEEO D90-4CH Dash Cam and ACC Hardwire Kit. This bundle is designed to provide continuous surveillance for your vehicle, especially with its 24-hour parking monitor mode.

Beeld 1.1: verbyview of the PRUVEEO D90-4CH Dash Cam and Hardwire Kit.

2. Sleutel kenmerke

• 24-uur parkeermodus: The included hardwire kit enables the dash cam's parking monitor to function continuously, even when the vehicle's engine is off. This provides uninterrupted power for extended surveillance.
• Lae Voltage Beskerming: An intelligent system is integrated into the hardwire kit to prevent vehicle battery drain. It automatically cuts off power to the dash cam if the car battery voltage drops below 11.8V (for 12V systems) or 23.5V (for 24V systems), ensuring sufficient power remains to start your vehicle.
• Wye verenigbaarheid: The hardwire kit supports input voltages from 12V to 30V and provides a 5V/3A output, making it compatible with various vehicles and Mini USB interface devices.
• Quad Camera System: The D90-4CH features multiple cameras (Front, Left, Right, Rear) for comprehensive coverage around your vehicle.
• Super Nag Visie: Equipped with advanced night vision capabilities, including an F1.8 aperture and infrared lights for the cabin camera, ensuring clear recordings in low-light conditions.
• Noodslot: Automatically locks current video footage upon detecting a sudden impact or collision, preventing it from being overwritten.
• Loop opname: Continuously records by overwriting the oldest footage wanneer die geheuekaart vol is, wat ononderbroke opname verseker.

Image 2.1: Illustration of the D90-4CH's quad camera system and key features.

Image 2.2: Demonstration of Super Night Vision capabilities in various lighting conditions.

3. Wat is in die boks

Nadat u die boks uitgepak het, maak asseblief seker dat al die volgende komponente ingesluit is:

• PRUVEEO D90-4CH Dash Cam
• Mini USB to Hardwire Kit
• Installation Crowbar
• 8 x Fuse Tap Cables (various types)
• 4 x Kabelversteekklemme
• 128GB Mikro SD-kaart (vooraf geïnstalleer of apart ingesluit)

Image 3.1: Components of the ACC Hardwire Kit.

4. Opstelling en installering

4.1 Montering van die dashcam

Mount the D90-4CH Dash Cam securely on your vehicle's dashboard or windshield, ensuring it does not obstruct your view. Use the provided adhesive mount or suction cup mount as appropriate. Position the front camera to capture the road ahead clearly, and adjust the cabin camera for optimal interior view.

4.2 Hardwire Kit Installation for 24-Hour Parking Mode

The hardwire kit connects your dash cam directly to your vehicle's fuse box, providing continuous power for parking mode and protecting against battery drain.

1. Identifiseer Sekeringboks: Locate your vehicle's fuse box. Refer to your vehicle's owner's manual for its exact location (typically under the dashboard, in the engine bay, or in the trunk).
2. Koppel drade: The hardwire kit has three wires:
   • Rooi Draad (ACC): Connect to a fuse that is only powered when the ignition is on (e.g., radio, cigarette lighter). Use one of the provided fuse tap cables.
   • Yellow Wire (12V Normal Power): Connect to a fuse that has constant power, even when the ignition is off (e.g., hazard lights, interior lights). Use a fuse tap cable.
   • Swart Draad (Grond): Connect to a metal bolt or screw on the vehicle's chassis that provides a good ground connection.
3. Insert Fuse Taps: Select the appropriate fuse tap cable for your vehicle's fuse type. Insert the original fuse into the lower slot of the fuse tap, and a new fuse (of the same rating as the original) into the upper slot for the dash cam circuit.
4. Roete kabels: Carefully route the hardwire kit cables along the vehicle's trim and headliner using the provided cable hiding clips and installation crowbar to ensure a neat and secure installation.
5. Koppel aan Dash Cam: Plug the Mini USB connector from the hardwire kit into the corresponding port on your D90-4CH Dash Cam.
6. Toets verbinding: Start your vehicle to ensure the dash cam powers on. Turn off the vehicle and remove the key to verify that the parking mode activates (the dash cam should remain powered or enter a low-power parking mode).

Image 4.1: Wiring diagram for the ACC Hardwire Kit connection to the vehicle's fuse box.

Image 4.2: The LED indicator on the hardwire kit illuminates when correctly installed (ACC and Black wires).

5. Bedryfsinstruksies

5.1 Basiese werking

Once powered, the D90-4CH Dash Cam will automatically begin recording. The display will show the live view from the cameras. You can switch between camera views (front, cabin, rear, split-screen) using the buttons on the device.

5.2 Parking Monitor Mode

With the hardwire kit correctly installed, the dash cam will automatically switch to parking monitor mode when the vehicle's ignition is turned off. In this mode, the dash cam will detect impacts or motion (if enabled) and record short video clips to capture events while parked.

5.3 Toegang tot opnames

Recordings are saved to the Micro SD card. You can view recordings directly on the dash cam's screen, or remove the SD card and insert it into a computer for playback and backup. Emergency locked videos are stored in a separate folder to prevent overwriting.

Beeld 5.1: Voorbeeldamples of video capture from the D90-4CH's multiple cameras.

6. Onderhoud

• Skoon lense: Maak die kameralense gereeld skoon met 'n sagte, pluisvrye lap om duidelike videokwaliteit te verseker. Vermy skuurmiddels.
• SD-kaartbestuur: Periodically format the Micro SD card (at least once a month) to maintain optimal performance and prevent data corruption. Back up important footage voor formatering.
• Firmware -opdaterings: Check the PRUVEEO official webwebwerf vir enige beskikbare firmware-opdaterings om te verseker dat jou dashcam die nuutste kenmerke en foutoplossings het.
• Temperatuur: Vermy die blootstelling van die paneelbordkamera aan uiterste temperature vir lang tye.

7. Probleemoplossing

• Dashcam skakel nie aan nie:
  • Check all cable connections, especially the hardwire kit connections to the fuse box and ground.
  • Verify that the vehicle's fuses are intact and not blown.
  • Ensure the vehicle battery has sufficient charge.
• Parkeermodus werk nie:
  • Confirm the yellow wire of the hardwire kit is connected to a constant power fuse.
  • Gaan die lae voltage protection setting; if the battery voltage is too low, the kit will cut power.
• Swak videogehalte:
  • Maak die kameralense skoon.
  • Maak seker dat die beskermende film van die lense verwyder is.
  • Check dash cam settings for resolution and exposure.
• SD Card Error/Recording Issues:
  • Format the Micro SD card within the dash cam's settings.
  • Ensure you are using a high-speed (Class 10 or U3) Micro SD card.
  • Try a different Micro SD card to rule out card malfunction.

8. Spesifikasies

9. Waarborg en Ondersteuning

For warranty information, technical support, or service inquiries, please contact PRUVEEO customer support directly. Refer to the product packaging or the official PRUVEEO webwebwerf vir die mees onlangse kontakbesonderhede en waarborgbeleid.

You can also visit the official PRUVEEO Store on Amazon for more information: PRUVEEO Store