Milex 2 Burner Gas Braai

Inleiding

Thank you for choosing the Milex 2 Burner Gas Braai. This manual provides essential information for the safe assembly, operation, and maintenance of your new gas braai. Please read these instructions thoroughly before use and retain them for future reference.

The Milex 2 Burner Gas Braai features powerful burners for precise heat control, a sleek design, and high-quality materials for durability. It includes convenient features such as a warming rack, automatic ignition, and a gas bottle hook.

Belangrike veiligheidsinligting

• Slegs buiteluggebruik: This appliance is designed for outdoor use only. Do not operate indoors.
• Ventilasie: Ensure adequate ventilation. Do not operate in an enclosed area.
• Gassilinder: Store gas cylinders in a well-ventilated area, away from heat sources.
• Vlambare materiale: Keep flammable materials, liquids, or aerosols away from the appliance.
• Lektoets: Always perform a leak test on all gas connections before first use and after any gas cylinder change.
• Kinders en Troeteldiere: Hou kinders en troeteldiere weg van die warm toestel.
• Toesig: Moet nooit die toestel sonder toesig laat terwyl dit gebruik word nie.
• Lees instruksies: Always read and follow all instructions in this booklet before operating the appliance.

Opstelling en samestelling

Carefully unpack all components and ensure all parts are present before beginning assembly. Refer to the included assembly diagram for detailed steps.

1. Assemble the Main Body: Follow the instructions to connect the base and main grill housing.
2. Attach Side Shelves: Secure the side shelves to the main body using the provided hardware. These shelves offer convenient space for utensils and platters.
3. Installeer wiele: Attach the wheels to the designated locations on the base for easy mobility.
4. Place Cooking Grills and Warming Rack: Position the black matte enamel cast iron cooking grill and the iron wire warming rack inside the braai.
5. Connect Gas Regulator and Hose: The braai comes with a ZA regulator and 60cm PVC hose. Connect the hose to the braai's gas inlet and the regulator to your gas bottle. Ensure all connections are tight.
6. Perform Leak Test: Before first use, apply a soapy water solution to all gas connections. Bubbles indicate a leak. Tighten connections or replace parts as necessary. Do not use the braai if a leak is detected.

Figuur 1: Voorkant view of the Milex 2 Burner Gas Braai, illustrating its compact design and side shelves.

Bedryfsinstruksies

Steek die branders aan:

1. Oop deksel: Always open the braai lid before lighting.
2. Turn on Gas Supply: Ensure the gas bottle valve is fully open.
3. Ignite First Burner: Push and turn the control knob for the left burner to the "HIGH" position. Immediately push and hold the ignitor button for 3-5 seconds. You should hear a click and see the burner ignite.
4. Ignite Second Burner: Once the left burner is lit, turn its control knob to "HIGH". The right burner will automatically ignite from the flame of the left burner.
5. Pas hitte aan: Once both burners are lit, adjust the control knobs to your desired heat level (LOW to HIGH).
6. Troubleshooting Ignition: If a burner does not light within 5 seconds, turn off the gas supply, wait 5 minutes, and repeat the lighting procedure. If ignition issues persist, refer to the Troubleshooting section.

Cooking with Your Braai:

• Voorverhitting: Close the lid and allow the braai to preheat for 10-15 minutes on medium heat before placing food on the grill.
• Temperatuurbeheer: Use the control knobs to adjust the flame intensity for different cooking requirements. The integrated thermometer in the hood allows for accurate temperature monitoring.
• Opwarmingsrak: Utilize the warming rack to keep cooked food warm or to gently toast buns.
• Selfs kook: The black matte enamel cast iron cooking grill ensures even heat distribution for consistent results.

Figure 2: The Milex 2 Burner Gas Braai in use, demonstrating the cooking surface and side shelves.

Onderhoud en versorging

• Maak roosterroosters skoon: After each use, once the braai has cooled, clean the black matte enamel cast iron cooking grill. The product care instructions specify "Hand Wash Only" for these components. Use a grill brush to remove food residue.
• Buitenste skoonmaak: Wipe down the steel hood and front panel with a damp lap en sagte skoonmaakmiddel. Vermy skuur skoonmakers wat die afwerking kan beskadig.
• Brander Onderhoud: Periodically check burner ports for blockages (e.g., from food debris or insects). Clean with a wire brush if necessary.
• Berging: When not in use for extended periods, store the braai in a dry, protected area. Disconnect the gas bottle.

Probleemoplossing

Produkspesifikasies

• Handelsmerk: Milex
• Model: 2 Burner Gas Braai
• Kleur: Swart
• Materiaal: Stainless Steel (Burner, Thermometer, Handle), Steel (Hood & Front Panel), Cast Iron (Cooking Grill), Iron Wire (Warming Rack)
• Pakket afmetings: 79 x 58 x 44 cm
• Item gewig: 13 kg
• branders: 2, #409 Stainless Steel
• Ontsteking: Outomatiese ontsteking
• Ingesluit komponente: Gas Braai, ZA Regulator, 60cm PVC Hose
• Aanbevole gebruik: Outdoor Home Use

Waarborg en Ondersteuning

For warranty information or technical support, please contact Milex customer service. Spare part information is not available or provided directly in this manual. Please refer to the official Milex website or your retailer for further assistance.

You can visit the official Milex store for more products and information: Milex Store on Amazon.co.za