X-Sense SWS0A41 Wi-Fi Water Leak Detector Kit Instruction Manual

Inleiding

The X-Sense SWS0A41 Wi-Fi Water Leak Detector Kit provides advanced protection against water damage in your home. This smart system includes a base station and four ultra-slim water leak sensors designed to detect leaks as shallow as 0.4 mm. With app alerts, a loud base station alarm, and a long wireless range, you can monitor your home for leaks from anywhere.

Sleutel kenmerke sluit in:

• Instant App Notifications: Receive real-time alerts on your smartphone when a leak is detected.
• Hoorbare alarm: The base station sounds an alarm up to 100 dB upon detection.
• Dual Sensor Probes: Equipped with both top and bottom probes for comprehensive leak detection.
• Ultra-slank ontwerp: Compact sensors (0.7 in / 17 mm thick, 3 in / 77 mm diameter) fit into tight spaces.
• Lang draadlose reeks: Sensors communicate with the base station up to 1,700 ft (500 m) in open areas.
• IP67 Waterdigte Gradering: Ensures reliable operation in humid environments.

Pakketinhoud

The X-Sense SWS0A41 Wi-Fi Water Leak Detector Kit includes the following items:

• 1 × SBS50-basisstasie
• 4 × Water Leak Sensors SWS0A
• 1 × Kragadapter en kragkabel
• 8 × AAA Replaceable Batteries (Packed with Sensors)
• 1 × Gebruikershandleiding

Opstelling

1. Laai die X-Sense Home Security-app af

Download the "X-Sense Home Security" app from the Apple App Store or Google Play Store. Ensure your smartphone's Bluetooth is enabled for initial pairing.

2. Power the Base Station

Connect the provided power adapter and cable to the SBS50 Base Station and plug it into a power outlet. The base station must remain powered on during setup and operation.

3. Pair the Base Station with the App

Follow the in-app instructions to add the base station. You may need to press a button on the base station for 5 seconds to enter pairing mode (indicated by a flashing yellow light). The base station connects to your home's 2.4 GHz Wi-Fi network (5.0 GHz is not supported).

4. Prepare and Pair Water Leak Sensors

The SWS0A water leak sensors come with 2 AAA batteries pre-installed. To activate, ensure the batteries are properly seated. Follow the in-app instructions to add each sensor. You will typically need to press a button on the sensor twice to initiate pairing (indicated by a blue flashing light).

Installasie

Strategically place your water leak sensors in areas prone to water leaks. Ensure the sensors are placed on a flat surface. Do not place the device upright or on an uneven surface, as this may prevent proper detection or cause false alarms.

Recommended Placement Areas:

• Basements (near sump pumps, water heaters, water softeners)
• Kitchens (under sinks, near dishwashers, refrigerators, ice makers)
• Bathrooms (near wash basins, toilets)
• Laundry Rooms (near washing machines)
• Near water pipes, windows, garages, restrooms, and wine cellars.

The sensors feature 2 ultra-sensitive water probes on the top and 4 on the bottom, allowing them to detect water as shallow as 0.4 mm or drips from above.

Bedryfsinstruksies

Leak Detection and Alerts:

When a water leak is detected by a sensor, the following actions occur:

• The LED on the water leak detector will flash red.
• The base station will sound an alarm (up to 100 dB).
• You will receive an instant app alert on your phone, notifying you of the leak and its location.

App Kenmerke:

The X-Sense Home Security App offers several features to manage your leak detection system:

• Adjust base station alarm volume.
• Mute an active alarm.
• View your alarm history.
• Use "Remind Me Later" to temporarily mute alerts for set durations (10 min, 30 min, 2 hrs, 6 hrs, or 12 hrs).
• Test the device functionality.
• Ontvang waarskuwings oor lae batterye.
• Share sensor access with family or friends.

Muting the Alarm:

To mute an active alarm, you can either use the app or press the button on the back of the water leak sensor. The sensor will remain muted until it is dry.

Onderhoud

Battery vervanging:

Each water leak sensor is powered by 2 AAA batteries, which can last up to 3 years. When the battery is low, you will receive an alert via the app. To replace the batteries, carefully remove the 3 screws on the back of the sensor, replace the batteries, and re-secure the cover tightly to maintain its waterproof seal. Using lithium batteries can extend the lifespan to 5 years.

Waterdigte gradering:

The SWS0A water leak sensors have an IP67 waterproof rating, making them suitable for use in humid and dusty environments. This ensures reliable operation near dishwashers, water heaters, and other moisture-prone areas.

Probleemoplossing

• Wi-Fi-versoenbaarheid: The system is compatible only with 2.4 GHz Wi-Fi networks. It is incompatible with 5.0 GHz networks.
• Verbindingsreeks: The wireless connection range is up to 1,700 ft (500 m) in open areas. Obstacles like walls and large appliances can reduce this range. Ensure the base station is centrally located or within reasonable proximity to all sensors.
• Sensorplasing: Always place sensors flat on a surface. Improper placement (upright or at an angle) may prevent accurate leak detection.
• No Sensor Alarm: The SWS0A water leak sensors themselves do not emit an audible alarm; only the base station sounds the alarm. If you require a model where both the device and base station sound an alarm, consider the X-Sense SWS54 Kit.
• Lae battery waarskuwings: The app will notify you when sensor batteries are low. Replace AAA batteries promptly to ensure continuous protection.

Spesifikasies

Waarborg en Ondersteuning

For warranty information, technical support, or any inquiries regarding your X-Sense Wi-Fi Water Leak Detector Kit, please refer to the contact details provided in the included User Manual or visit the official X-Sense webwerf. Hou jou aankoopkwitansie vir waarborgeise.